PMO Induction EFI Install with Standalone ECU - Porsche 911 3.2L Hotrod Part 1

Подписаться 16 тыс.

Просмотров 4,5 тыс.

50% 1

I'm thrilled to Install these PMO Induction EFI throttle bodies and standalone ECU on my vintage Porsche 911 hotrod. Modern EFI on a vintage 3.2L will improve performance, appearance, and engine sound. Please stay tuned for my five part series showing all the steps required to setup up this PMO induction EFI system. This will include sensor calibration, first start on Zalex engine test stand, wire harness install into car, and dyno tune.
First start video here:
• Setting Up PMO Inducti...
Below is the rundown of all the selected hardware in this video.
PMO Induction EFI Hardware Available from Pelican Parts
PM-O941-0 EFI Kit (Includes throttle bodies, linkage, fuel rails, etc)
PM-O914-0 Manifolds
PM-O310-0 Air cleaners
EMTRON SL6 + ELC2 Wideband Controller
Bosch LSU4.9 Oxygen Sensors
Clewett Cam Sensor 1001-61
Clewett Crank Sensor 9101-127
Clewett TPS 1001-71
Hall Effect Crank Sensor 7002-05
Coil On Plug - Denso from TurboKraft
MAP Sensor - 16254719 - amzn.to/3wvxa3I
Intake Air Temp Sensor AC Delco - 2019-401 - amzn.to/3wvmcLD
Syltech Oil Temp & Pressure Sensor - mscs -4p-G10-NS
Fuel Pressure Regulator Holley - 12-880 - amzn.to/4b8uj00
Bosch Green Fuel Injector EV1 - 0280155968- amzn.to/3QSvJnh
Porsche Knock Bridge - 993-104-391-00
Bosch Knock Sensor - 261231096 - amzn.to/3y0tK9H
Engine Temp - 964.606.405.00
Bosch Idle Control Valve - 280140501
Wire Harness- Technica Racewire
Patreon / ahhgaragetime
Insta @ahhgaragetime
FB / ahhgaragetime
Website www.ahhgaragetime.com
Ahh Garage Time Email Stories:
mailchi.mp/b63353737df0/sign-...
@EMPI_Inc
#pmoinduction
00:00 PMO Induction EFI Install
00:29 Top three reasons for PMO EFI
01:59 Flat 6 Intake Sound
02:33 Modern EFI Weight Savings
02:49 Removing Stock Motronic EFI
03:27 Emtron Standalone ECU
05:23 46mm PMO Individual Throttle Body EFI Review
06:23 Checking throttle blade fit
08:59 PMO EFI Machining in USA
09:49 MAP Sensor Ports Explained
10:16 Fuel Injector Spray Path Improvement
13:11 Sensors Needed For Sequential Fuel Injection
13:49 Cylinder Knock Sensor Placement
14:21 Cam Sensor Location
14:48 Denso Coil On Plug
15:41 Throttle Position Sensor TPS
16:08 Intake Air Temp Sensor
16:42 Crank Position Sensor 36-1
17:23 Idle Control Valve Placement and plumbing
18:53 Technica Racewire
22:02 PMO EFI Install Complete

Авто/Мото

Опубликовано:

5 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 52

@GarageTimeAutoResto 3 месяца назад

Thanks for watching this new series. I love a good challenge👍 and this is once again new territory for me. I listed all the components used in this video's description. You can check out the PMO EFI kit on Pelican Parts online too. Wish me luck 🙏

@olegregersen1024 3 месяца назад

How I love a project that is continuously evolving, and where the tasks is described in separate videos. It is very exciting and You are very capable of describing the work steps. I am looking forward to follow this next journey. Thank You.

@GarageTimeAutoResto 3 месяца назад

Thanks, it's all about the journey and tinkering for me. This should keep me busy for a while. First start video coming soon

@roadtrips42 3 месяца назад

This is so cool. Looking forward to the completion.

@annoodannoo1032 3 месяца назад

So educational. Keep it comin'!

@GarageTimeAutoResto 3 месяца назад

For sure!

@jeffharrison5265 3 месяца назад

Man, this is GREAT information! I think a great deal of it will be helpful in my EFI upgrades to the V12. Looking forward to more. This will be a great series and thanks so much for going into great detail. Awesome stuff here.

@GarageTimeAutoResto 3 месяца назад

Thanks Jeff, there's a lot to learn but I'll share as much as I can.

@mbrouder 3 месяца назад

I really need to consider doing this. I have a twin plug 3.6 with 50mm PMO carbs that makes lots of power but suffers from that 2800-3000 rpm stumble. Maybe in a few years it'll be EFI and never look back. Could sell the carbs to offset some of the cost.

@GarageTimeAutoResto 3 месяца назад

Cool, EFI let's you control air fuel ratio everywhere so stumbles are a thing of the past. I'm going to sell my Motronic EFI to offset a big chunk of the cost too.

@carlmclelland7624 3 месяца назад

YES!!! I like it! The only thing you need now is a Bursch exhaust system. I can't wait to see and hear you crank it the first time....

@GarageTimeAutoResto 3 месяца назад

Good idea on the exhaust. First start coming.

@shill6693 3 месяца назад

Tom - Following and taking notes. Your detail is excellent! Keep up the good work. I'll be following in your footsteps in the future! Thank you!

@GarageTimeAutoResto 3 месяца назад

Great to hear, I hope to help.

@oiygfdxssfgg 3 месяца назад

You do great work, I enjoy your videos.

@GarageTimeAutoResto 3 месяца назад

I appreciate that!

@daveg507 3 месяца назад

All i can say Tom is WOW!

@911engineguy 3 месяца назад

what a tease! Can't believe you didn't fire it up for us! 🤣

@GarageTimeAutoResto 3 месяца назад

Ha ha, I wish I was teasing.

@davidraeside 3 месяца назад

Tom that looks like an amazing setup on that 3.2...looking forward to hearing that fire up!

@GarageTimeAutoResto 3 месяца назад

Thank you, will try soon.

@openhighwayproductions 3 месяца назад

More power is always better... Would you provide a complete breakdown of costs of all parts involved to get it finished?

@GarageTimeAutoResto 3 месяца назад

Yep, I put everything in the description. I'll add everything up, but it's not cheap. I'll report back later.

@GarageTimeAutoResto 3 месяца назад

Here's the cost breakdown in video form ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-VGXdMM1qnV0.htmlsi=yLMDI2nFt3hLIeTL

@OwhyeeVdub 3 месяца назад

Right on, been looking forward to this!!

@GarageTimeAutoResto 3 месяца назад

Thx me too!

@jamesbuckingham8073 3 месяца назад

Hell yes; it's going to be bitchin!

@GarageTimeAutoResto 3 месяца назад

💯

@carlosherrera7822 3 месяца назад

Love it!! Do you know if available for Porsche 356 engine??

@GarageTimeAutoResto 3 месяца назад

I heard that it's coming.

@dra911 3 месяца назад

Woah, full effort EFI conversion here! Having done an EFI conversion myself, I know it's no easy undertaking. Why the choice of Emtron, may I ask? I'm originally from Oz, and they are a new one to me... So many options these days. Will you change the 3.2's rods if you swap the cams?

@GarageTimeAutoResto 3 месяца назад

Please help if you can. I agree this is not easy, but nothing I've done on this car is easy, sheet metal mods, chassis strengthening, trans rebuild, paint, wiring, ha ha. Why are so many standalone ECU companies in Australia? You guys love EFI! Emtron is a more affordable Motec with better support. A few so cal tuners know it well and that is why I chose it. Maxxecu is another street grade ECU that I considered. Yes, I will replace the rods. The question is will I replace the crank and oil pump at the same time?

@dra911 3 месяца назад

@@GarageTimeAutoResto I'm not sure how I can help, but feel free to pick my brains. My project is still not even fully complete! (Still waiting on my garage so I can proceed.) BUT, it starts and idles really nicely with a ~14.5 AFR, even in cold weather. OEM like. That took some time, but I learnt a lot in the process, and that was part of my ambition. Emtron sounds great and I'll definitely keep that in mind for the future. If you replace the rods, crank and oil pump then you've just about achieved the holy grail of N/A EFI conversions for this car 🙂

@cramiro71 3 месяца назад

Good upgrade, something to keep in mind. How much extra torque and hp do you expect to get? It would also be nice to know total cost, if possible

@GarageTimeAutoResto 3 месяца назад

I should gain 15 or so horsepower and torque, but will see on the dyno. The big improvement will come after I change the camshafts. The stock bosch AFM (Air Flow Module) can't handle many good camshaft designs, but these PMO EFI throttle bodies can. Hope to be close to 300 HP soon. Here are the cost breaksdowns ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-VGXdMM1qnV0.htmlsi=yLMDI2nFt3hLIeTL

@terjegronlie1181 15 дней назад

Question: I have a 1999 996 with a M97 3.8l 2007 model engine running on a 996 ECU. The performance is inadequate on rpm and top speed and I am interested to see if its possible to upgrade the ECU or a standalone computer plus wiring harness as an alternative to replacing the engine to the original M96 engine (I have one on hand). Which is the easier route. Replacing the engine will cost about 10k, but I can sell the M97 engine for about the same price. Do you have any input to the best option?

@GarageTimeAutoResto 13 дней назад

My guess is the newer engine needs a better tune before it damages itself. A standalone ECU will allow someone to get the maximum performance out of that engine. Do you have to pass emissions test? If so then the original engine might be the only option?

@ebutuoyebutouy 3 месяца назад

Nice. Thanks for sharing. No TPS sensor?

@GarageTimeAutoResto 3 месяца назад

It does, it's on the 4,5,6 throttle body. See 15:30

@ebutuoyebutouy 3 месяца назад

@@GarageTimeAutoResto Thanks. I apologize.

@GarageTimeAutoResto 3 месяца назад

No worries, lots of people skip around on my videos because they are very detailed.

@johngibson712 3 месяца назад

Recent sub here. I have seen or scanned all the videos on Mac 3.2. What a great project. Do you have a video describing your background or how you learned the skills to do the work on this car. Is this really a DIY type of project or are you a Porsche mechanic in sheep's clothing. LOL.

@GarageTimeAutoResto 3 месяца назад

Welcome here. I learn by doing, that's it. I've been interested in cars and mechanical things since I was a little kid. I talk about it a little in this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-gsSw2V_lvpE.html

@johngibson712 3 месяца назад

@@GarageTimeAutoResto Very cool video. It was well done. What resources do you consult to learn what you need to work on the cars? I would love to work on my own Porsche too (once I buy one that is) but I would be afraid of making a costly mistake.

@GarageTimeAutoResto 3 месяца назад

Don't be afraid, it's just a car. This is the best time to start as the information age is in full swing. Read as much as possible on forums, Facebook, RU-vid and then compare with the factory workshop manuals. The manuals are great, but they aren't detailed enough for a beginner, but the information is considered the best. Oh and learn by doing. Reading alone will get you nowhere. Join our Patreon group. We talk about each other's projects every Monday.

@johngibson712 3 месяца назад

@@GarageTimeAutoResto "its just a car". LOL, and expensive one. I did join the Patreon group and look forward to learning from the group.

@GarageTimeAutoResto 3 месяца назад

Thanks, I'm leaving tomorrow for two weeks to Greenland, so the Monday call will resume when I get back. I'll email you a link.