hello guys sa videong ito ituro ko step by step ang pagawa ng ayaw mag charge na poco f2 pro 100% satisfied repair po ito. Please Support This Video for Subscribing may Channel Thank you guys! Keep Safe Every one'!
thank you, I've repaired this phone like 5 times but the problem still exists and come back after some time, i'll trying the solution I have some arduino jumpers :D
Yep same problem with my F2 Pro. I did a temporary fix cuzz I ordered a new flex cable. The thing is the cable is somewhat ok when it's cold but after you plugin the charger and the fast charging kicks in the wire in the flex cable gets so hot it doesn't work anymore, at least in my case. So I also made a jump wire but I did it without soldering it. I put a very thin like hair wire between the connectors on the main and usb board and the flex cable. The wire is very stable in place cuzz the flex cable holds it down nice and tight. It's good for a temporary fix but I still suggest to either solder it or replace the flex entirely for a permanent solution :-)
Boss panu pag nabasag fpc connector ng charging port from motherboard pwede paba gawaan paraan? Saka panu malaman kung saan ko i solder ung jumper wire boss? D na kase ko makapag charge eh
Idol nalaglag kanina f2 pro ko pero ok naman sya kasi may case , late ko na nalaman ang naging issue nya biglang ayaw mag charge po ano kaya posibleng sira nya ? Tsaka ask ko lang po pano po gamitin ung thinner ba un para ma open po ung back cover
boss ask ko lang na tanggal yung isang parang sungay sa taas ng board ng redmi 9t ko may connect ba yun kaya ayaw masindi?. yung pinaka taas dalawa na parang sungay
Wire jump is able to support fast charging / turbo charge? I'm in the problem, ordered a flex cable + sub board. But I'm afraid of issue stills not 100% fix.
@@Mohamed.Ahmed.Hussein changing the flex is enough, what I recommend after you change it is not to use the original cable to charge the phone, use another cable with less potency that permit you can still use fast charge, but not use ultra fast charging with the original cable.
@Mohamed.Ahmed.Hussein that was my solution because even you change the flex eventually will suffer damage again, and is for the ultra fast charging. That's is a horrible fabrication malfunction 😭
@@Mohamed.Ahmed.Hussein i did actually bought a new flex cable from an online store and manually swap the cable. It work perfectly fine for me, just be careful on removing the back cover or else you might accidentally break it.
Hello po boss pwede po mag pagawa senyo nang poco m3 dead boot po problema sana mapansin nyo po boss need po kasi sa school para magamit po nang kapatid ko thankyou po in advance
