POD Filters Setup - CB650 Bobber Build - Episode 19

Подписаться 166 тыс.

Просмотров 40 тыс.

50% 1

ENTER TO WIN THIS BIKE? bit.ly/cb650bobber
Winner also receives an $810 set of Speed and Strength Riding Gear.
A $6000 Total Value
Today we dig into the carburetors for a deep cleaning, new gaskets and to change the main jets from a 90 to a 120 for more fuel. Once the carbs are all set we install them on the bike along with the 4 POD filters. The final look is stone cold "Retro". Love it.
BIKERS CHOICE POD FILTERS:
Find them from TUCKER in this catalog: online.fliphtml5.com/lxnd/ukzb/
(A budget priced alternative to the super-pricey K&N units)
1980 CB650 CARBURETOR REBUILD KIT ON AMAZON:
tinyurl.com/yy4jnwjn
(Not sure I recommend this kit since multiple parts were wrong including the slow jets and cover gaskets)
RUBBER CARB MANIFOLDS ON AMAZON:
tinyurl.com/y2ds6k8c
(These fit the biker perfect)
This Bobber Build Series is sponsored by Tucker.com and SSGear.com. Check them out for all your bike and riding gear needs.
Thanks for hanging out.
MOTO PILOT

Развлечения

Опубликовано:

29 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 73

@joegorini 5 лет назад

It's Always a pleasure see the nontification of a new video, can't wait ti see the final result , great job untill now, keep up! 🤘🏻

@rtg3571 5 лет назад

Looking Good!!! I built an 81 maxim about five years ago and had to put biggest jets I could find. I installed same pod air filters. Anyway...keep up the great work!

@halfast88 5 лет назад

You put the floats on upside down i think

@cowboy80ez 5 лет назад

Thats really starting to look sweet!

@jsmc2104 5 лет назад

The little diaphragm with the long stem is the accelerator pump, it adds a squirt of fuel at the start of acceleration. The incorrect diaphragm you had in the package is an air cut off valve.

@axerat1255 3 года назад

my cb650 has got 28mm mikuni smooth bore carbs on it ..... and it rocks!!!

@joshuaburchell9645 4 года назад

Love your work

@tomknox8227 4 года назад

How did those floats work? Dump a little fuel?? You are not the first to install them upside down😛

@9BallerJW1 5 лет назад

Looking sweet ! I’m sure the chopper forefathers got frustrated too... Rock on !

@owengrimes5207 3 года назад

I followed this rebuild on mine. I love your work but the floats were put in upside down and the floats should be tuned. Also the air screw placement and main jet size is off. Really should be running like a 110 or 108.

@tgerber91 4 года назад

How did you tuning go? I would recommend welding bungs on the exhaust with custom intake and exhaust and use a Wideband O2 sensor to get a proper tune.

@JayNabuLe 5 лет назад

looking sweeeet!

@keltecshooter 5 лет назад

Wow , next time use carb spray on the boots and they will slip on like buttah , carb spray has lubricant properties , old timers trick i learned years ago

@geoffoneida487 5 лет назад

This bike is looking better and better each video. That gold accent on those little covers really looks good and gives it that different aspect of a garage bobber

@thatduckieYT 4 года назад

I'm wondering how you tuned the Pod filters and you did say that you fabricated something for inside the pods to limit the air flow. Do you mind explaining what you did?

@christiangomez7526 5 лет назад

Love your videos man. I have a question.. When you run into a problem where do you go to read about the peace or engine?

@roadsterman 5 лет назад

The pilot air screws should be completely removed and inspected with a good LED flashlight. Make sure the O ring is good and there is a spring and washer on top if the spring. This will make a big difference.

@anthonyakers6374 4 года назад

how do u get the pilot out?

@roadsterman 4 года назад

@@anthonyakers6374 Use a small screwdriver.

@sinformant 5 лет назад

Are you going to show how to vacuum balance the carbs?

@mattkoontz5517 5 лет назад

Hahahahaha....that big ass hammer is awesome! Lookn good brosiff!

@busyb5912 5 лет назад

my question is... why didn't u clean the carbs before u painted em?

@sinformant 5 лет назад

Dang those carbs actually look pretty clean for their age my 98 zx6r carbs looked like garbage when I got it and that was in 2007.

@johnderekmitchell1510 5 лет назад

Probably because of the garbage gas that's always gone through it. At least this one had a few years of unblended.

@sinformant 5 лет назад

@@johnderekmitchell1510 that's what I thought too. I had to replace a fuel pump on my sv because of that ethanol blend crap. Corroded the crap out of the fuel pump and it was barely working. After that I found a gas station that sold pure gas.

@kenaldyhendolp6732 5 лет назад

Muito bom

@mauricehill5782 4 года назад

Yo!!! Loving the bike but my question is that I have a 79 with the same carbs what size pods you had to order for them

@owengrimes5207 3 года назад

48mm

@robweiler6711 2 года назад

I am doing a CB650C Cafe Racer project and I am having the same issue with my choke not clearing the pods. Any suggestions to get past this?

@populations1st 2 года назад

ive got this stationary belt sander jb weld and a plastic card mine are so big around i had to sand a flat spot 9/16 deep roughly dont want them to touch each outher cant waitght for spring so i can get to the side yard and see what

@marciobaeta3184 3 года назад

Where is the episode 18?

@blackf350 5 лет назад

If there wasn't an easy fix way on the gasket Napa sells gasket sheet rolls to make your own.

@radialorbits 4 года назад

Cereal box cardboard works a treat too ;-) they are only cover gaskets

@eebarreto 3 года назад

pod filter opening size?

@user-vh4ez9be7j 5 лет назад

نااااااايس👏👏👏

@anthonyakers6374 4 года назад

How do you get that pilot jet out? Doing a rebuild on mine doesn't seem to have a grove to put the flat head on

@FHWL6 3 года назад

Use a grinder an add the flat head mark yourself then you can use a screw driver to take it off

@dirtbikeguy8993 5 лет назад

Accelerator pump. Fyi

@gamer.x9298 5 лет назад

I really had a wish to win this bike bcz I'm a big fan of these bikes never had one....top 1 on the wishlist

@Uncle_Chuck 5 лет назад

cure break violins playing lol u suckhole pmsfl

@gamer.x9298 5 лет назад

@@Uncle_Chuck just like you sucker...

@Uncle_Chuck 5 лет назад

cure break I don’t see how I’m a suck hole lol check my comments

@rtg3571 5 лет назад

Btw....any vids from your ride to Colorado?

@MOTOPILOT6 5 лет назад

Not a lot...some basic stuff. I just wanted to focus on the rides.

@ChadwickRider 4 года назад

Good stuff, love watching the videos. Quick heads-up... I rebuild these engines, you installed the floats upside-down, also, I don't think you have the correct accelerator pump replacement. You should check out 4into1.com, hondapartshouse.com, davidsilverspares.com and vintagecb750.com

@nickdavis3428 4 года назад

Are these the pd42a carbs? I'm thinking about trying pod filters on my cb750.

@AtanasDimitrov954RR 2 года назад

hi. i have an issue been trying to solve for over 2 years and 2 sets of carbs. i have 87 CB650 cafe project. fully rebuild motor. the original set of carbs were fully rebuild. issue is when i turn fuel on the carbs leaks especially 2,4 from bowl. i have tried OEM gasket kits from EBAY, ets. so i thought maybe it is carbs. i got another used set from ebay, same thing. i did setup float height by the manual and have the float tool as well. any tips?

@scottschottenheimer7764 Год назад

Hello! Even if you set the floats by the manuals specs some aftermarket rebuild kits have slightly different specs for the parts they come with. If fuel is leaking from the float bowls 99% of the time it is the float needle letting in to much fuel. You might just have to readjust a little at a time to dial it in. And I know this probably isn't your problem, but make sure your floats aren't on upside down.

@RustyStator Год назад

Get a set of round wall Mikuni vm34. These old CV carbs are a pain in the butt and they don't do well with modern garbage gasoline.

@loganmontgomery1351 4 года назад

Doing pod filters on mine did 120 jet work out?

@owengrimes5207 3 года назад

It all depends on your bike I wouldn’t do a 120... 110 or 108 works best. It’s mostly going to come down the how much air your picking into the carb.

@Uncle_Chuck 5 лет назад

Because of your exhaust mods and the pods u should bump to 125 at least mate or you have a massive chance of leaning out at hi rpm

@amandasmith4167 4 года назад

CHOPPER ATTARD I’m confused also I’m building a cb750 bobber build same air pod air filter and exhaust setup as the one in these videos what size jet should I use on my bike ??? I can’t get this guy to answer any of my questions can you help

@Uncle_Chuck 4 года назад

Amanda Smith hey Amanda Definitely start with a bigger main jet than original I’m not sure what it has originally and get dyno tuned before riding it u don’t want to waste all that time building it to blow it up

@Uncle_Chuck 4 года назад

Amanda Smith I use same name on fb I’d love to see what u got so far

@amandasmith4167 4 года назад

So you think I should start with a 125 jet??

@amandasmith4167 4 года назад

I just thought with pod and cutoff exhaust setup I should go bigger maybe 125 right and where can I buy 4 cheap carb rebuild kits and 4 jets instead of buying a whole pack of 10 or 20 different ones