Pole Barn Build On A Budget! Telephone poles and HEAVY Beams 

The quality of these videos just keeps getting better!

Nice job, and nice family. It's good to see the kids involved.

I had six weeks to start my pole house, rained out seven days, lumber yard forgot me can't get a delivery for three day's, the truss builder moved me out until the middle of November by that time we will have four feet of snow. Trying to get some help from all those that I have helped for years. Still homeless. I learned a lot from your videos, thank you

While I'm obviously not a big fan of your "Crane", I do applaud your ingenuity. You gotta use what you have. Nice project. Can't wait to see the finished barn.

That was very clever!

Nice channel. I'm glad it was on the home page this morning.

Amazing work!!! I am excited to see this project through to the end. :)

You should never pour concrete around the poles, it promotes rot. Just 8" of concrete in the bottom for a footer. And, that way you can still adjust the bottom of the posts during building if need be. Then backfill with gravel to keep water off of the post bases.

Muckin' Mud. Part O' Life. But sometimes... I'll tell you what. Thanks for the vid! Fun to watch

Palm hammer for the rafter ties.

Great video!

It's coming along great decision on hiring a second set of hands y'all are very efficient look forward to the coming video's I'll spread your podcast with all the other construction related creators i watch hope it helps you grow

Careful with that Bosch level. I used one building my shop and it doesn't always self level. I had to tap it more than a few times to get it to level

When your budget is fifty thousand that's not a problem .

Just curious what did you use hardware-wise to fasten the headers to the posts? Structural screws, carriage bolts? BTW I have the same exact tractor and I'm glad to see a method that you came up with that lifts up large posts like that. I tried to do the same thing years ago and I wish I had watched this video first, although it had not come out yet

Great job and thanks for the details on important issues. I’m just in planning stages now and struggling to find prints for barns that are your barn styles. Is that monitor style barn? Where did you find your prints?

everybody needs a pole barn even though they are cheesy

So nice to see so much progress! I'm still waiting on my builder to install the piers, hopefully we can do them this week.

Am inspired bye your injunctive thought coming up with that boom lift and not letting anything stop u great job and god bless u and your family and all your viewers

Like yur tractor boom. I did same with a backhoe and a bolted beam on the bucket.

I was a commercial framer for years. After stumbling across your video I kinda miss it. I tried nailing the hangers before setting beams as it’s on the ground. Easier and faster. But hey, either way works. What part of the country are you in?

So the posts are just set in the dirt and then put concrete around it? How long do they last before they rot out? Once they rot how do you fit it? We are thinking of building pole barn but would always use concrete piers- but I was wondering how long the posts would last if you set them in the dirt.

Won’t the timber rot being in the dirt with direct contact to concrete? Is there a better way to protect it or will that last long enough

Good work with the chainsaw 👍🏻.

Прекрасная работа посмотрел с удовольствием Середины столбы чем обработаны!?

Good morning John here, what's the gadget on the rear of the Kubota, for levelling. Many thanks

Not only are they different size and taper, telephone poles each have a different bow to them

They make a cordless palm nailer or pneumatic, good for joist hangers and teco nails

SURE WISH YOU POURED A PAD FOR THE POLES. ANYWAYS ...........COOL

Are you a construction worker by trade??? You definitely know what your doing😊 ❤ i know this is a project channel, but can you show your. Horses.????

Can you share the building plans?

Looks good Mike, making some headway now, listen to the wife! And don't forget to tell her, you were right honey, happy wife happy life!

Very nice build! My wife and I are looking to do the same kind of build. Just curious, do you happen to know the dimensions of the barn and lean-toos? Great craftsmanship!

For the joist hangers…next time get yourself a palm nailer. It’ll change your life

What grapple bucket do you have?

We had a destructive hurricane strike our community and the pole barns with lean-to sides survived the wind. The free-standing pole barns were damaged.

Any suggestions what I should wrap my bases with before I install my poles. Please. Serious. Asking for myself. I'll make a video

What were the dimensions of your canter part of your barn?

In the Ag sector, there's no such thing as OSHA, only, oh-shhht. lol. But all is well in good hands. Looking great so far so good!

I am impressed! is this in Ohio?

My relatives build any pole barn u want people builds poll barn for a temporary house then bulld there house they use the kits cheapest this includes metal concrete floor wiring come to Oklahoma they build u anything u want on a budget poor people in Oklahoma to

It's all cool man butt I hate screws. All done construction work. Where is the hundreds galvanized 16 penny nails.. entity by 4 and 2 4/6 three hits 20 oz hammer. Back in the early seventies. That wasn't very many screws back today. We had a nail gun. But I could out my all that gun. We had to share a plate to building to the emergency room. With a penny galvanized nails. I could run circles around that gun. Helpful to my pouches. 28 Nails staggered. Dark and couldn't keep up with me. It was air. May I have brute strength. She got to drag that air hose around a compressor runs out of gas.. Henry's buildings weighed 14 ton. Allwood everything was on a hinge four-way piano hinge. Mud seal Foundation. Wonderful that up February 11th 6 wide 34feet ft. When we open them up 28 ft wide 34 ft long. Completely sided inside vinyl tile ceiling fiber tile. Roofing . Laser all classrooms back in the day no wheels at all not a modular trailer. I took a semi and a special gear to hook onto it. . You split the gear in half 1 Park stays on a truck on the fifth wheel. The other frame goes on the back of the building dual axles 8 wheelers regular semi tires. Two beams going up still there front and back. Jack of the buildings to the height. You stick to screw drip pins in there end of the building 3 ft long from the gear into the building to the front to the back can you get cables 1-in cables link to the building hooks on the back ratchets in the front. Tighten them down Jack Em Up pull the blocking out. Course all the other block and came out to go with all the way around outside down in the center. It's like getting a stack of books lining them up and squeezing them together and you can lift them all up at the same time. So I guess there was a lot of pads have to be filled. Sometimes it's over too high off the ground we had to post them 4 x 6 post 16 + 16 parrot stack 5/8 plywood 2 x 6 in the middle. TECO clips and now the. Oh yeah we use house check to raise them up. From the back. 5 ft bars. Sometimes I can stand in between both bars Jack one end of by myself. Get it up to height and block it. Hairstyles one tough long-haired Indian still am and still long-haired. Oh yeah there was like books too had to come out in order to fold these buildings. So yes I love hammering. Yeah I'm not as young as I was back then but I can still drive a nail. Good luck and be safe.💪🏽💪🏽 People used to ask me if I lift weights how to say yep hi raised 14 ton buildings. My alarms are still about the same. But my belly isn't.🤙🏾👍🏽🙏🏽😊😎🙋🏽‍♂️ Northern California. Left that job and became a truck driver. Hauling Lumber. Big Timbers 4 X 12 4/16 30 ft long. I went to Southern California. Millions of board feet Lumber all shapes and sizes. Even 2 x 4 12 inches long. Talk about it paint to strap.

You do know the post/pole that are placed in ground will rot and then what?

Hangers not angled isn't a problem

Nice job and your going to have some handy space with that new building. One nit pick however string lines no matter how tight always sag,the bigger the span the more sag there is. Maybe a datum mark on each post with a laser level etc then measure up from that datum point to get the exact measurements needed .

Your post holes dont look very deep ?

Sorry Bud, those are light poles. Ever seen a telephone on a pole?

I'm assuming by the title, your budget is like 200K!!

Your beam spans are highly questionable. In addition, the center section should have been built first.

:::::: TIME HAS RUN OUT !! John 3:16 For God so loved the world, that he gave his only begotten Son, that whosoever believeth in him should not perish, but have everlasting life. Don't ignore this message... REPENT NOW !! TRUST that God raised Him from the dead !! By FAITH accept JESUS's blood alone as payment for your sins unto Salvation, to escape what's about to happen !!

Should have gotten some Amish , would have been up in a day

Wanna meet a real man -- go visit a farm. Shit. Loved your makeshift crane.

Truly informative! I needed a reference that highlighted basic wood frame construction methods & techniques where ru-vid.comUgkxYGamVaHfdHiPlAQaLa7zkwR02OKpGYDU were best. I am pleased with the depth and clarity of Ryan’s Shed Plans. It was really convenient to capture!

On your double 10" headers, why didn't you put some osb between the boards? I've seen this done several times, just curious why they do it and why you didn't? Not knocking, just curious.

Great job and thanks for the details on important issues. I’m just in planning stages now and struggling to find prints for barns that are your barn styles. Is that monitor style barn? Where did you find your prints?

Power co gave me 50 old power poles and I used them for fence posts. They were hell on a chain saw though. Went through 2 chains. Lol

Great job and thanks for the details on important issues. I’m just in planning stages now and struggling to find prints for barns that are your barn styles. Is that monitor style barn? Where did you find your prints?

Would you happen to have a materials list? Awesome build!

Team work= Success. Job well done