Polo 6R - Removing fog lamp assembly and fog lamp bulb

Просмотров 57 тыс.

% 650

Here’s a quick video that shows you how to remove the fog lamp assembly on the VW Polo 6R and access the bulb for replacement or upgrade.
The tools required for the job are given by VW as a part of the tool kit. :)
Check out my other DIY videos on the VW Polo 6R:
1. Removing/replacing headlight assembly - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Y8PqzTIUcWI.html
2. Changing bulbs of a single beam headlight assy. - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-mEQuyq8cZxc.html
3. Removing/replacing the tail light assembly - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-0mQdvUyrw2w.html
4. Changing bulbs of tail light assy. - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YvooT4HNvMk.html
5. Replacing headlight switch, range controller unit - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hUcMVNzhIA4.html
6. Automatic headlights & coming home/leaving home lights - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4VueBQ5uTXw.html
8. Removing number plate light + OEM LED unit upgrade - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-DelecWTNq44.html
9. Removing rear seat bench - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-KwFRnSDNv1w.html
10. Removing/replacing windshield washer spray nozzle - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-AjYdAF2Qzg8.html
11. Attaching the front tow hook - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-jdPGiK4yksQ.html
12. Removing/replacing side AC vent - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-wOCTE6XxB9E.html
13. Removing cabin light, upgrading to better units - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-RzWCs6lTVBc.html
14. Removing/replacing interior rear-view mirror - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IJDKf4PVTFU.html
15. The OEM Emergency Warning Triangle - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-tfK3Lq5pa7Q.html
16. Removing the boot lid/tailgate trim - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HafGEC7BIdg.html
17. Repairing broken headlight mounts - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-h5eoFr7ytEQ.html
18. Removing interior grab handle - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-gPCWMdJm7DY.html
19. Replacing rear wiper and wiper arm cap - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-BUGdV15UA90.html
20. Installing door striker plate covers - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-39fZkxOEgUQ.html
21. Replacing front windshield wipers - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-gDDg8vGGNnw.html
22. Changing the stock windshield wash reservoir cap - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-zx-DnEtlJsQ.html
23. 1.6 TDI service - Part 1 | Intro - Parts and Tools - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-j81G32liiF0.html
24. 1.6 TDI service - Part 2 | Changing cabin air filter - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_dbfjutpJ8k.html
25. 1.6 TDI service - Part 3 | Changing intake air filter - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-a01fYf9OaQ0.html
26. 1.6 TDI service - Part 4 | Changing fuel filter - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9xMlE3R8wrk.html
27. 1.6 TDI service - Part 5 | Changing engine oil - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4LkdIwwM7Zw.html
28. 1.6 TDI service - Part 6 | Changing oil filter - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-kZqx9yDp8wI.html
29. 1.6 TDI service - Part 7 | Reset service reminder - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-QyDGYG3KtHQ.html
30. 1.6 TDI service - Part 8 | Wrap up - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-eictsjXBXBo.html

Авто/Мото

Опубликовано:

27 июл 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 60

@Nobody-wp8yk Год назад

Many Thanks from Belgium !

@azdetailed1894 10 дней назад

Thank you 🎉

@ahmerahmed2234 11 месяцев назад

Thanks Man.. Just came across.. saved me atleast Rs 200 LoL 😂 DIY

@aamirdahodwala Месяц назад

VERY WELL EXPLAINED!🙌🏻

@saeedzz1 Месяц назад

Glad I watched your video. Thanks for the help.

@Saaj2 2 года назад

Thanks, very useful video

@balanraman5044 3 года назад

Brilliant video. Kudos.

@sanzvlogs5157 2 года назад

Cool video ganesh

@saia9281 2 года назад

thank you, it's very helpful

@GaneshBalan 2 года назад

Thanks man. Appreciate it.

@roopakmaddara6833 2 года назад

Thank you soooo much!

@veblen674 Год назад

Excellent - Thanks

@GaneshBalan Год назад

You’re welcome. 😊 Please do check out the other clips on the Polo.

@Mario-gn2ht 3 месяца назад

thank you 😊

@8ballpoolking67 Год назад

Well done

@GaneshBalan Год назад

Hey thanks! 😊 Do check out some of the other clips on the Polo.

@dr.mangeshrahate8788 2 года назад

Thank You

@GaneshBalan 2 года назад

Thank you for the appreciation Doc. Please do check out the other clips.

@gsudarshan7251 2 месяца назад

Did this job on a buddys comfortline 2012 this past weekend along with the headlight replacement. Only grouse - these screws are damn expensive. 30 rs each for the 5x16 self tapper and 50 rs for the m6 bolts. had to buy the self tappers but used equivalent 8.8 gr M6 pooja forge hex head bolts with SS washers from my bolt bin.

@GaneshBalan 2 месяца назад

Good to hear man. Those screws and bolts are expensive man! Where did you source them from?

@gsudarshan7251 2 месяца назад

@@GaneshBalan the normal japanese type hex head were already available with me. I simply changed all accessible screws. the VW specific ones(N90974701, N90808201 and N10354602) were sourced from boodmo along with some rubber bushes, suspension rubber and brake pads.

@parthjalan 3 года назад

👍

@ankitk3487 2 года назад

For new polo there is no pin hole to pull fog light trim. Is there any other way for newer models?

@GaneshBalan 2 года назад

Hi Ankit, the new facelift with the GTI bumpers have a different method. Check this clip: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3ni4r8zzxmc.html

@vlad1110 Год назад

does the fog lamp need canbus for changing to led lights to makes it works?

@GaneshBalan Год назад

Hi VLAD, at least here in India, we don’t have to. High end BCMs can however throw a bulb-out error. Why don’t you try it out?

@ezhilanezhil 2 года назад

Hi, is that just an yellow tint ...or an different colour set available in after market?

@GaneshBalan 2 года назад

Just a plain yellow tint. Most accessory shops have this.

@navmeet7 Год назад

Sir, what’s the procedure to remove the fog light trim from Vento (2022) since they have GTI style bumper. The trim does not have a hole but this tool is provided in the kit.

@GaneshBalan Год назад

Navmeet, the trim does have a hole. Please recheck.

@PraisePrince 11 месяцев назад

Hi sir can u post a video for Taigun also? It would b helpful..

@GaneshBalan 11 месяцев назад

Hi, I’ll definitely try. I don’t have an immediate access to a Taigun so will scout around for a car from a colleague or through friends’ friends. If I get hold of one, will definitely do. 👍🏻

@antonymathew Год назад

Would like to know if the same method applies for Taigun also ??

@GaneshBalan Год назад

Hi Antony. Yes indeed. Have you noticed a small hole in the fog light trim of your Taigun? It can be pulled out to reveal the mounting screws of the fog lamp.

@antonymathew Год назад

@@GaneshBalan yep.. i just saw that holes .. .. Will try a pull and see...

@mangeshbhagwat4388 Год назад

Any manual setting for fog lamp leveling?? After bulb replacement? Or it does not require any manual setting

@GaneshBalan Год назад

Hi Mangesh, there’s a plastic screw behind the fog lamp assembly which permits you to do it but once it is set from the factory, you really don’t have to adjust it anymore.

@mangeshbhagwat4388 Год назад

@@GaneshBalan Thanks for your reply.. So if replace new bulb there is no need to adjust anything..right?

@GaneshBalan Год назад

Nope. It’s a fit it and forget it arrangement. 👍🏻

@deerghayuphukan1215 2 года назад

If i buy the horn and connect with the connector, is it plug and play?

@GaneshBalan 2 года назад

Yes but you’ll need a clamp to secure the horn. Ask the service center for it.

@GaneshBalan 2 года назад

Low tone - boodmo.com/catalog/part-6rf951221b-28500333/ High tone - boodmo.com/catalog/part-6rf951223b-28500335/

@GaneshBalan 2 года назад

Dude I can’t seem to read your messages. Doesn’t show up. Do ping me on 9099691369. Will delete this message later.

@Pratapushine 10 месяцев назад

H8 can we add LED bulb

@GaneshBalan 10 месяцев назад

Hi Pratap, yes. I had used a pair of H8 LED bulbs before.

@navjitdang 2 года назад

Sir what bulb did you use here? This is an aftermarket bulb right?

@GaneshBalan 2 года назад

Hi Navjit, yes this is a Philips H11 55W bulb. The stock ones I believe are 35W bulbs.

@ankitk3487 2 года назад

@@GaneshBalan Is it okay to replace it with 55W or we need special setup. Also, I am assuming bulbs shown in video is diamond vision from Philips.

@GaneshBalan 2 года назад

That’s right. You can upgrade the fog lamp bulbs to 55W without the need of any special harness or relays.

@girishk3433 11 месяцев назад

Hi, where can we get this pin? Don't find in my tool kit.

@GaneshBalan 11 месяцев назад

It’s there in the standard tool kit on the Polo and Vento. Did you check the styrofoam casing properly?

@GaneshBalan 11 месяцев назад

It’s there in the standard tool kit on the Polo and Vento. Did you check the styrofoam casing properly?

@girishk3433 11 месяцев назад

Yes, I checked it. Probably I may have lost it during the service or while cleaning.

@GaneshBalan 11 месяцев назад

@girishk3433 Alternately you can make one by bending a thick cable using pliers. The type you would use for hanging clothes for drying.

@girishk3433 11 месяцев назад

Okay, I will try this method. Thanks a lot for your quick reply and btw the video was helpful.

@GDAWG. 11 месяцев назад

“Dont worry about the plastic tabs breaking”! 3 of mine broke on 1st attempt! 🙄

@GaneshBalan 11 месяцев назад

Ouch, sorry to hear that man. I hope you didn’t pull it out too fast? Either way, this trim retails for dirt cheap. At least here in India. Where are you located?

@dietzness 5 месяцев назад

Wait... you're kind of cancelling out your light yield by using a blue hue bulb and a yellow lens filter. If you want yellow light, use a clear bulb here.

@GaneshBalan 5 месяцев назад

It was just a bulb swap DIY; not meant to drastically improve the throw or the brightness. But I get your point. Thanks.