Pop Channel Patti Machine Manufacturer In Rajkot Gujarat, #Popchannelpattimachine Our Pop Bottom Patti Making Machine or Pop Section Machine is for producing Pop Cross Section, Ceiling Section, Perimeter Channel, Intermediate Channel, Metal Stud Section. Our Roll forming machine complete with the Roll Tool suitable to produce the foamed roof channel or corrugated Channel in various sizes, inline foaming, punching and cutting. Rolling shutters now have become extremely popular in all our the world.
De coiler 200 KG cap.
Entry Gate with
Roll Forming Line with 8 station , 1 Gear Boxes & 5 H.P. electrical.
Control Panel semi auto
Cutting Unit
Technical Specifications : (Plate body)
Maximum sheet width that can be formed : 500 mm
Maximum sheet thickness in G I Strips that can be formed : 0.5 mm
Horizontal distance between shafts : 165 mm
Number of forming stations : 8 nos.
Vertical station : 2 nos.
Total HP for Line : 7 (ABB)
Speed of the machine : 5 mt/minute
Size of machine : 1600 x 1200 x 1100 mm
Mandrel Uncoiler
Coil weight : 200 KG Max
Coil width : 200 MM
Coil bore : 450 MM min, 510 MM max dia.
Mandrel movement : Manually adjusted
Back Tension : Manually adjusted
Entry Gate
Entry gate will be provided for movement of sheet to roll former.
Main Base
The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.
Mill stands (Station)
The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.
15 июн 2023
