Portable Hitch Mounted WINCH Build w/ Swivel and synthetic cable

Подписаться 354 тыс.

Просмотров 579 тыс.

50% 1

Hitch or Chain your winch to anything. Swivels to pull straight, give longest cable life, and maximum pulling force.
2000lb winch I have: amzn.to/3dHOd4j
Evolution Metal Circular Saw w/3yr warranty: amzn.to/2QR3Mgv
Extra Steel cutting 7-1/4 blades: amzn.to/3dInUuQ
Evolution Mag Drill LARGE w/3yr warranty: amzn.to/2UKLqis
Evolution Mag Drill MEDIUM w/3yr warranty: amzn.to/2Rcqekv
Annular Cutters: amzn.to/3bDQyvy
Links above are all items I own and trust spending my hard earned money on. They are affiliate links that may benefit me and help me sustain the channel with a few pennies, if you purchase something.
Synthetic Winch Cable Rope Thoughts: I haven't used it enough to warrant recommending it. I don't like the non roller fairlead and will clean up/reinstall the original roller fairlead that came with the winch. The rope is lightweight and flexible but seams fragile if you allow it to rub on something. This is the rope I bought www.harborfrei... HOWEVER there are cheaper options on Amazon without the fairlead/hook as you can reuse those: amzn.to/2ylb5qm
sixtyfiveford
Want to toss Ginger a new bone: www.paypal.me/sixtyfiveford

Опубликовано:

26 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 522

@GTECHEE Год назад

I gave you a thumbs up when you showed the magnet in the coke bottle trick for picking up metal shavings 👍

@johnnyjimj 4 года назад

I swear this is the most useful channel on youtube!!!

@sixtyfiveford 4 года назад

Hey Thanks.

@dirtbiker651 4 года назад

I couldn't agree more! I never comment, but I think you are a freakin GENIUS! Thank you for spending the time to teach me such useful life skills! YOU ROCK!!

@nathanhale7444 Год назад

I agree. I've learned so much from this guy. I copied his tire tool changing tool for the harbor freight tire changer and love it

@iancameron198 Год назад

@@sixtyfiveford what's better a rope or the cable.what would you advise

@sixtyfiveford Год назад

@@iancameron198 I've been switching over to rope. Why? Lighter and easier to move around. Biggest issue is they aren't abrasion resistant though and it still makes me nervous that they're going to break when I need it. I will say though I was using a cable come-a-long week and a half ago and I stabbed myself so bad with a stray wire on the cable that I swore I hated cables but I don't know.

@sfm1022 4 года назад

I use mine to get HVAC equipment up into the attic & power it with a 20v Dewalt battery. I got mine at Harbor Freight w/a wireless remote for $75. I love the look on my customers faces when they ask how are you going to get the furnace down & backup. And I tell them my thumb.

@wooly1286 4 года назад

How far dose one batt. Get you? I have the DeWalt 20v 2ah batt. Just wondering how far they'll get me

@sixtyfiveford 4 года назад

That's awesome. I think these small winches pull around 10amps under light load and 50amps stall at 12volts. A typical 18v/20v battery pack is going to put out 30amp at 18volts nominal. So more than enough amperes to handle the load. The higher voltage would be hard on the winch if you ran it for a really long time, but winching is a quick job. Nice idea.

@metagoat 2 месяца назад

Hell yea that's awesome

@saifcathum3423 3 года назад

That magnet in the bottle trick, sweet. Autoplay led me here. Didn't even know I needed Portable Hitch Mounted Winch until now.

@nushinebob 3 года назад

S.o.b. me either! Didn't know I needed a magnetic drill press either.

@1D10CRACY 4 года назад

Love the bottle trick!

@sixtyfiveford 4 года назад

Thanks, I'm glad you liked it.

@jackleonard8660 4 года назад

Great idea, we think alike. Only difference is I bought a receiver with stacked receiver tubes so if I have a trailer hooked up I can use the top tube for my winch. I didn't think about the swivel action so I'll definitely use your swivel set up. My thoughts were pulling onto a car trailer or tow dolley when working alone. Came across your video by accident but glad I did. Thanks for the idea/ info. Jack Leonard

@macswanton9622 4 года назад

Whole process in under 15mins. Crisp n clean, no caffeine... beautiful.

@sixtyfiveford 4 года назад

Thanks, I'm glad you liked it.

@CorkyWine 6 месяцев назад

So nice to see how he and his best buddy love and takes care of each other.

@patmason7276 4 года назад

Put holes in plate and put a pin to keep from moving when you have it in what ever position you want. Cool design simple and useful.

@WIDESIDE72 4 года назад

Great idea for a project. Years ago i had a winch, smaller than this, but it had a similar set up. Instead of having the receiver mounted, it had a large hole that you could drop over the trailer ball. Pretty handy. It burned out and i couldn’t source parts but i kept the mount. I have a big 10k lb winch now. Overkill. But i only gave $150 for it.

@grandad400 3 года назад

Good idea with the magnet and bottle with obstacles everywhere

@t.e.1189 Год назад

Thank you for being a good presenter. I love watching youtube to get ideas from others, but not all youtubers are good at presenting their ideas. some don't explain things real well or repeat themselves unnecessarily. You get right to the point and speak clearly. Thanks!

@sixtyfiveford Год назад

I appreciate that!

@MrB82901 4 года назад

The magnet in the plastic soda bottle works great. No more slivers picking up scrap. Thank you for your excellent videos.

@sixtyfiveford 4 года назад

Thanks, I'm glad you liked it.

@martinfoster5163 2 года назад

Very creative. I'm pretty inspired. And your dog is adorable.

@selador11 4 года назад

Dude! You have some of the best toys!

@sixtyfiveford 4 года назад

Thanks.

@fastacker2 4 года назад

He's Batman. :)

@charlesbugeja4273 4 года назад

I did that over 40 years back. Great work pal.

@sixtyfiveford 4 года назад

Thanks, I'm glad you liked it.

@CorkyWine 6 месяцев назад

I did that when I was running horse and wagon in the west.

@joshs1555 Год назад

Man that reverse paint shot was wild! I watched it 3 times.

@BacktotheBasics101 Год назад

That’s a really handy little tool. I was watching this again man have a live this long and not had something like this. Awesome video like normal.

@sixtyfiveford Год назад

Hey thanks

@BacktotheBasics101 Год назад

@@sixtyfiveford You are welcome 👍🏽

@BacktotheBasics101 Год назад

@@sixtyfiveford You are welcome 👍🏽

@slidingdoor9055 4 года назад

Good. I use a winch occasionally on my lorry so I wired a Anderson plug to the rear next to the trailer plug and just plug it in because I use the winch as a lifting mechanism whilst driving.

@sixtyfiveford 4 года назад

That's fantastic. I've thought about installing plugs front/rear. Maybe I'll have to now.

@ScottysVise 2 года назад

I combined this swivel mount, but with your other video of the drill powered hand winch. So now I can winch from all angles with the battery powered drill. I can also take the winch off, and bolt on a vise, or my mini tire changer. I have a 12v winch hooked up in my truck bed at all times, but this swivel mount is the bees knees for odd angles, and being that it's portable, you can do all kinds of stuff with it! Thanks man!

@jaydub5728 10 месяцев назад

Great invention and video! Ive got one of these winches, and have been messing with all kinds of mounts.... this is perfect!

@davidsargood3228 3 года назад

Here's what I did, basically the same idea but instead of bolting the plate to the ball I cut a keyhole in the plate and it just drops over the ball. That way it's quick and you can leave your hitch in. Other than that I like it. Oh and I use a remote control winch, it makes like a little easier.

@ryanhughes676 3 года назад

A great idea made even greater! The keyhole idea is ingenious!!! Thanks to you both

@LawpickingLocksmith Год назад

Love it! Thanks. Glad your dog has a master.

@36MICHAELFUNKE 4 года назад

This is very intuitive! I have a 10,000 pound winch that I'm going to use the same idea on, just built a bit heavier duty. Thanks a ton for sharing man!

@safetythirdwoodworking23 6 месяцев назад

You sir, are a genius! I love the coke bottle idea, that was worth the price of admission to your picture show. Obviously the winch mount is another great idea. You should mass produce them and sell em online. Good job.

@geeper2142 4 года назад

I mounted a square tube on the front of my ATV and back for the same reason. If you put a cut piece of nail or anything with a point in your mag drill chuck . You can center a hand tap perfect every time. We use to do that on huge paper machine base's cutting threads for anchor bolts.

@sixtyfiveford 4 года назад

That's a good idea for lining it up.

@tomstepanowicz6191 4 года назад

That's an awesome metal cutting saw. No sparks, no screeching. Wow!

@sixtyfiveford 4 года назад

It's an impressive tool.

@timthetoolman4575 2 года назад

Well I finally built mine today. I've had one for several years to pull straight off of my 1 1/4" receiver. But my new car has a 2" receiver and although I bought an adapter, I liked your swivel idea. My new build fits the 2" receiver and swivels. GREAT IDEA, thanks

@sixtyfiveford 2 года назад

That's great.

@mattd8411 8 месяцев назад

Awesome idea thanks. Wanna do this for my dump trailer for loading logs.

@airecraft1 4 года назад

A magnet tip that’s useful for us and maybe you someday we use it when we need to drill through ceilings floors walls where it takes two people to locate the hole before cutting We take two round neodymium magnets one one either of the surface we want to drill or cut when they connect we can measure to any obstructions or framing.

@sixtyfiveford 4 года назад

Great tip!

@ChrisGilliamOffGrid 4 года назад

I'll have to remember that one brother.😉👍👍

@airecraft1 4 года назад

Chris Gilliam Man Stuff It’s a big help we use it all the time

@gardeningpreacher 2 года назад

Of all the setups I've looked at, I believe yours is the best. I just got a Harbor Freight 5000 lbs winch for Christmas and have begun building a setup similar to yours. Also, I love all your Ford gear!!!

@sixtyfiveford 2 года назад

Thanks, I'm glad you liked it.

@BrucesShop 4 года назад

Nice to see you having fun and modifying something to improve it. thanks. Giving me ideas.

@sixtyfiveford 4 года назад

Hey Thanks.

@2rharms 2 года назад

I love this idea, so inovative. It's exactly what I've been looking for. Thanks.

@TheMonkdad 3 года назад

Great video. Thanks for the disclosure of gear reduction with wrap.

@wyattoneable 4 года назад

Cool tip with the plastic bottle and magnet. Yes, I enjoyed this one. Lots of options with this build idea.

@sixtyfiveford 4 года назад

Thanks, I'm glad you liked it.

@timflanigan8586 4 года назад

Always something to learn, this time it’s the magnets in the bottle.....🤯. PS....Ihave a 7 pin adapter on mine that works on my 12 volt.

@sixtyfiveford 4 года назад

Yeah, the 7 pin to charge the battery up would be a good idea.

@biggs8729 3 года назад

Definitely loved the magnet in the bottle trick!

@ozzstars_cars 4 года назад

That can really get someone out of a jamb. Nice job with the fabricating.

@sixtyfiveford 4 года назад

Thanks, I'm glad you liked it.

@dethmaul 4 года назад

You're a savant! You did this way better than i would have lol. I visualized just a winch plate welded to a hitch, yours is slim and pivots. Fantastic job!

@sixtyfiveford 4 года назад

Thanks, I'm glad you liked it.

@xxDOTH3DEWxx 4 года назад

This channel and project farm remind me of a pair of half brothers

@hectorcalderon3011 4 года назад

And sweet project cars and chrisfix are his first cousins

@sixtyfiveford 4 года назад

Thanks, I'm glad you liked it.

@hectorcalderon3011 4 года назад

@@sixtyfiveford you have helped many of us and taught people how to repurpose and improve what we have

@samiam6253 4 года назад

I have something similar, but you took it to the next level. I will be adding the chain. Great idea.

@sixtyfiveford 4 года назад

I originally just put the chain on to pull a trailer via a tree years ago. It has come handier than I thought and much easier than a come-a-long.

@biggs8729 3 года назад

Nice set up. I basically did the same thing with a worm drive hand winch I had. You can drive it with a cordless drill. No 50 lb battery to lug around. If I might point out, it looks like you might have set the fairlead too high. At 13:00 The fairlead looks like it is rubbing pretty hard against the rope. I see it is probably on the 3rd or forth wrap, but if you set the fairlead as low as possible so it just barely clears the cable on the first wrap, it should give you about 3 or 4 wraps before it starts rubbing hard on the other end. Also consider cutting off 1/3 of the rope and make a winch extender out of it. You won’t have to pull so much line out to get to the bottom wrap and if you have a long reach, you can always use your extender.

@dangroce82 Год назад

Weld some flat stock to the hitch on both sides and on the end, drill multiple holes in it and put a couple holes that will line up in the winch plate. Then you can pin them to multiple angles so the winch isn’t trying to move.

@brhino 3 года назад

That's brilliant ! Vid is well edited too with enough info and less me me me & blah blah blah. Thumbs up 👍

@oscarzambrano6127 2 года назад

Man, I think I learned atleast 3 new things from your one video. Great stuff!!

@davegoud 3 года назад

exactly what I was looking for....always better to watch others before doing the job, saves all sorts of headaches and design issues. Thanks man!!

@sixtyfiveford 3 года назад

Thanks, I'm glad you liked it.

@grandad400 3 года назад

Not bad at all mate I get stuck out in the bush often very sandy and normally use my trucks onboard crane to get out of trouble.i can use my jump starter pack because quite often it would save a lot of time securing the winch to a tree instead of the back of my truck.a small two ton truck that just looks at loose rock or dry sand and gets bogged.well done matey you have saved me some shovelling

@thirstquencher3203 3 года назад

That magnet trick🤯🤯🤯....YOU OWN THE BEST DOG 😁👏🏼👏🏼👏🏼👌👌

@sixtyfiveford 3 года назад

Hey Thanks.

@tims.5995 3 года назад

Dude that is very versatile , you should think about marketing that. I am gonna make one a put a 5,000 pound winch on it.

@sixtyfiveford 3 года назад

Thanks. I'm glad you liked it.

@SeppoVataja 4 года назад

Neat setup. One idea or suggestion for your consideration: You could put a bar 90 degrees to the winch drum to give you the ability to direct the rope side to side. The bar probably needs to be about 3 feet long and be able to work either side so removable. It could be placed ahead of the drum or behind, whatever works for your mounting plate. In this way the drum will remain neatly wrapped all the time. If you use a round bar welded under the drum you could use a pipe on it as your bar and it would work either side. Another way might be to have a nut under the drum that you put a power bar or breaker bar on to turn the thing a bit. No more birds nests. Just a thought, maybe the issue isn't there with the longer plate changing the pivot point.

@sixtyfiveford 4 года назад

Great idea. Thanks for your perspective.

@dwhallon21 Год назад

Excellent idea, good video

@drvnucrzy 4 года назад

Man who wouldn't want you as a neighbor? I would love to be hanging in your garage making these awesome projects!

@sixtyfiveford 4 года назад

Heck Yeah.

@thepitpatrol 3 года назад

The synthetic cable is the best thing to happen to winches. That saw is amazing, great video

@jackd2083 3 года назад

It’s great but don’t run it through areas with cactus or thorns of any kind!

@thepitpatrol 3 года назад

@@jackd2083 I had not thought of that. Thanks!

@jackd2083 3 года назад

@@thepitpatrol I haven’t done it myself but I’ve heard that you pretty much can’t touch the rope again!

@thepitpatrol 3 года назад

@@jackd2083 well my old cable stayed so frayed it wasn't much fun to touch either lol

@ElectricDanielBoone 2 года назад

I like your setup! I've been using a Warn drill winch for about the same thing for a few years now and it gotten me out of several jams up in the woods. Great for pulling logs around too. However, at only 750lbs of pull I have to rig three snatch blocks in order to enough pull to get the job done at times. Three times the pull equals three times slower, which can make a lot more work out of a self-recovery. So, I've been thinking about putting together something like you did here. I'll probably go with a 3500lbs winch, which is still light enough to pack into the woods a little ways, or move it to the front of our rig and attach it to a recovery hook with a short tree saver type strap.

@TRX450RVlogger 4 года назад

lol It's cute how your dog knows so many Commands! I have a Hokkaido he is about 5 years old (Rescued dog) but he knows Commands like crazy I never knew it til one day. Then I tried another and another. he knows a few.

@sixtyfiveford 4 года назад

That's awesome.

@rodneybrand8521 4 года назад

The mag drill is a nice addition along with the saw...you are always showing us the easiest way to do things..i along with others appreciate your sharing your thought's and skills..the dog is funny..see you on the next one Cheers 🍻🍻🍻🇺🇸🇺🇸🇺🇸

@sixtyfiveford 4 года назад

Hey Thanks.

@benjaminreinhardt259 4 года назад

Gave a thumbs up just for that magnet trick! Drill shavings are always a PITA to clean up.

@sixtyfiveford 4 года назад

Thanks

@helicopterjohns 4 года назад

Hi, Thanks for sharing! Nice Project. It is nice to be able to LISTEN!!!! and watch the SMART!!! people at work on RU-vid. The GREAT thing about this type of video is it gets people thinking about ways to make things better and more useful. Just like Henry Ford and the model T. Now look how far we have come with automotive technology. John

@sixtyfiveford 4 года назад

Thanks, I'm glad you liked it.

@concert610 4 года назад

I made something like this. 12,000lb winch. Heavy as one can get. Great for pulling tractors and trucks out of stuck situations. Total overkill. Love your idea of a swivel. I welded a 2" receiver to the bucket of one of the tractors.

@sixtyfiveford 4 года назад

12k, that's some serious pull.

@concert610 4 года назад

@@sixtyfiveford yeah. I didn't want to worry about the steel cable snapping. When they break other stuff breaks with it. I figure with that kind of pull something else will give up long before the cable.

@sixtyfiveford 4 года назад

@@concert610 I've always hated moving around the thick cable on bigger winches. This new synthetic cable may make me want to pick up a 10k or similar.

@concert610 4 года назад

@@sixtyfiveford this is my first winch and I will agree with you. The winch is heavy and the cable is heavy. Very annoying to say the least. I have thought about synthetic but I don't use the winch much. I would get more use out of longer electrical cables.

@ChrisGilliamOffGrid 4 года назад

@@concert610 I have a 13k lb winch I got off Amazon. Pretty awesome. I saw a 17k lb one on there too, but I don't remember the brand. I pulled a tree over with mine, vid is on my channel. Used it yesterday to pull up fence posts.😁

@TrojanHorse1959 4 года назад

Great video, idea, fabrication, and installation Moe, thank you! May you, your family & friends & Ginger, be safe and healthy!

@sixtyfiveford 4 года назад

Hey Thanks.

@LindenRanch 2 года назад

Nice fabrication. Love your saw.

@sixtyfiveford 2 года назад

Hey thanks

@nuttzandboltzgarage1946 3 года назад

Nice idea with the magnet and soda bottle. Never woulda ......

@sixtyfiveford 3 года назад

Hey Thanks, I'm glad you liked it.

@K4K96 3 года назад

Just built one. About to build my Dad one!

@pipbernadotte6707 Год назад

My brother says you should make a line guide for it, like on a fishing reel; and that'll fix your pivot problems.

@grahambate3384 3 года назад

Noice video. In Australia we use soft strap around trees, so we don't damage them.

@Scoutss21962 3 года назад

Nice job man, makes a winch much more useful than in a fixed position.

@kevinnobody3052 4 года назад

I have a 12000 lb. Warn winch mounted on a Reese receiver cradle and I use the crap out of that thing. You're setup looks great, much smaller than what I have but I'll bet you'll find all kinds of uses for it. Great job.

@sixtyfiveford 4 года назад

That's a lot of pulling power.

@TheBudliner 3 года назад

Now I need a winch

@tomnekuda3818 4 года назад

It's a really great idea....when I was living in Wyoming I had a '79 Bronco that this device would have really been useful to me. Now I'm in Kansas..the whole state is flatter than a fart and, well, not so much for me now. Anyway, good video. P.S. I was just admiring the drill right before you explained what it was. Man, I need both that and the saw.....really some forward thinking went into those! I don't care what the girls at the pool hall say, you're a pretty bright fella! Concerning the length....that's what they did when they circumcised me......Keep the Faith, Tom P.S.#3....I was in Rock Springs, WY......where are you in Utah? Really miss that country......sigh....

@sixtyfiveford 4 года назад

Thanks I'm glad you liked it. I had a 78 Bronco years ago and miss it. I'm in Salt Lake.

@Wyogoose 4 года назад

I was born, raised and still living in Rock Springs. 5 generations in the county.

@dalemoskalyk1227 4 года назад

Always get something from your vid's. Might be new terminology, new tool I ain't seen or a smile from you and pupper. Be safe bro. Peace.

@sixtyfiveford 4 года назад

Hey Thanks. Take Care.

@michaeldvorak5556 Год назад

Have you ever seen or heard about a wrench cable snapping? It does happen, and you don't want to be in its path. You can help to lower the danger by laying something over the cable, like a floor mat. Don't know how heavy the mat needs to be, but it will help.

@KCGmtn 3 года назад

The ending was the best!!!! Very clever video. Good job.

@sixtyfiveford 3 года назад

Thanks Man.

@sugargoldy 3 года назад

Good video I got a 5000 lb winch that I can put in a receiver hitch and pull things one way but I like your idea there so my head is spinning right now thank you

@sixtyfiveford 3 года назад

Thanks, I'm glad you liked it. I need to upgrade this to a 5k or bigger.

@oldfarmer9004 3 года назад

Nice setup! I will probably steal your idea. Thanks

@sixtyfiveford 3 года назад

Please do!

@ke6bnl 4 года назад

Years ago I made and still have my little winch on a 1/2 plate with a cut out like the old skeleton key opening so you just ste it over the ball and it slides to the narrower portion. Stays horizontal and rotates around the ball

@sixtyfiveford 4 года назад

Nicely done. I like it.

@christopherchampigny6586 3 года назад

This guy is a genius!

@MrVailtown 4 года назад

Love that Dog ! Think I'll build one close to yours, might add a stationary plate with holes on both plates to be able to lock in a direction. Like yours tho, food for thought.

@Patrick-c8x 4 года назад

That's how my swivel plow is on my Willys 👍🏼

@sixtyfiveford 4 года назад

My original plan in my head was to put location locking pin like you describe. The reason I didn't was because you are always going to be pulling against the fairlead in this situation and spooling the line on one side. This drives me crazy as you can only get around 4-5feet of pull before you have to unwind, rewind by hand and then pull another 5 feet.

@mountainmike1685 Год назад

I love your videos, they are great for inexpensive projects. The high dollar tools take away just a bit from that. Either way keep up the great work.

@briancarle Месяц назад

Great video, right to the point.

@robdedgar 3 года назад

Dang, I learned so much from your video! Thanks

@artthurman3446 3 года назад

Nice! Just what simple work should be like. I also like the Evolution tools! We have a 14 Evo steel cutting chop saw. For those who do not know...Evolution is serious Japanese quality. We have both Evo and Eaton 14" blades...not cheap!

@MRW21783 4 года назад

Awesome idea! Patent that thing before someone else does!!! My only concern would be a heavy pull at a high up or down angle. The plate would bend at the nut. Maybe up the plate to 3/8 or 1/2 inch. Bigger plate and a bigger winch for the heavy duty stuff. Some idiot out there would probably try to pull an 80 year old oak tree down with it 😂.

@tonybucca5667 3 года назад

A saw for lefties, like a worm-drive is actually perfect for right-handers. I have a Porter Cable left, and I can look right down to my saw tip without making like Quasimodo. I had 2 recievers on my E-150...I had planned on doing the same thing...until my engine blew.

@donpegar2645 3 года назад

Great video and project, but the bottle/magnet idea I'm stealing, thanks

@sixtyfiveford 3 года назад

Hey Thanks, I'm glad you liked it.

@josephcastro3448 3 года назад

awesome! thanks for being realistic and down to earth.

@sixtyfiveford 3 года назад

Thanks, I'm glad you liked it.

@Fyer 3 года назад

You're really smart. That's outside the box thinking at it's best. Great video. I'm gonna build one.

@sixtyfiveford 3 года назад

Thanks, I'm glad you liked it.

@mebcool 3 года назад

Good job sir. Love the dog training at the end... He listens a lot better than my dog, who someone else in these comments appropriately coined "is half kangaroo" :) !!! I haven't got him to ride on the mower yet though. Cheers :)

@AZsmoothrider 4 года назад

Another awesome video and the (almost required) feel good ending.

@sixtyfiveford 4 года назад

Hey Thanks.

@johndoe43 Год назад

Good job. Those metal saws are cool. Used a milwaukee to cut a 6 by 4 three quarter thick angle. No heat. Smooth cut. Couldn't believe something modern worked that well.

@2LateIWon 4 года назад

Love the versatility

@sixtyfiveford 4 года назад

Thanks Man.

@likeatr332 3 года назад

LOVE THE DOG!!!

@sixtyfiveford 3 года назад

Thanks man.

@helmet098 Год назад

Snatch block is my safe word

@robertbenedict4651 4 года назад

Brother, when I saw the magnets in the bottle trick hit the subscribe button so hard and fast almost put a hole in my phone.

@sixtyfiveford 4 года назад

Thanks, I'm glad you liked it.

@foxwood67 3 года назад

Good point about more wraps on spool = less torque

@sixtyfiveford 3 года назад

Hey Thanks, I'm glad you liked it.

@davidmcduffie1398 4 года назад

Good idea. They come in very handy. Sure beats a hand crank winch !!!

@sixtyfiveford 4 года назад

It really does for the long pulls.

@mrdddeeezzzweldor5039 4 года назад

When you double the cable through the snatch block and back to the winch (or other stable anchor point), it effectively doubles your load pulling power.

@sixtyfiveford 4 года назад

Yes, I use a snatch block every chance I get. It also allows more cable to be drawn out and increases the pulling force via the drum size.

@1970chevelle396 4 года назад

Great Idea. Seems like a lot of people are going with the rope over the cable now.

@sixtyfiveford 4 года назад

Yeah, I'm not sure if I'm sold on it yet.

@HiddenPinesHomestead 4 года назад

New subscriber here. I have a 67 ford, I was loading logs on my truck winch and chain way and thought about just what you did. I think RU-vid read my mind I have no clue how I stumbled upon this video. Lol

@sixtyfiveford 4 года назад

Awesome. Thanks for subscribing -Moe