POURING A CONCRETE FLOOR FOR A NEW GARAGE

Подписаться 301 тыс.

Просмотров 162 тыс.

50% 1

#concretefloor #garagefloor #howtopourconcretefloors
In this video I'm pouring a concrete floor for a new garage. The dimensions of the garage are 16' x 22'. This is a 4 inch thick concrete floor and we used a 3500 psi mix with fibermesh for reinforcement.
I was hired by the general contractor on this job only to install the concrete floor. The GC doesn't use wire mesh in his floors so we add polypropylene fibers in the mix as a replacement for the reinforcement.
The garage floor took 5.5 yards of concrete, we poured the floor and then we finished the concrete by troweling it smooth.
The concrete tools we use to pour concrete floors and concrete slabs are all from Marshalltown. They make very good quality tools that last. I highly recommend them if you're looking to pour a floor like this one.
VISIT MY WEBSITE:
www.everything...
USE THE SAME TOOLS I DO:
SPECIAL DEAL: Use Coupon Code EAC on all equipment and tools bought from Marshalltown's website and get 10% off the price plus FREE SHIPPING!!
MARSHALLTOWN POWER TROWELS:
marshalltown.c...
MARSHALLTOWN SHOCKWAVE VIBRA-SCREED:
marshalltown.c...
MARSHALLTOWN CONCRETE TOOLS:
marshalltown.c...
TOPCON LASER LEVEL:
amzn.to/2VrJ3zV
BULLFLOAT:
amzn.to/2U1Kx2F
HAND FINISHING KNEE BOARDS:
amzn.to/2TZmTUj
MAG FLOAT & STEEL TROWEL SET:
amzn.to/2IgmDOq
2" MARGIN TROWEL:
amzn.to/2G33KNn
CONCRETE PLACER OR KUMALONG:
amzn.to/2I00gxp
CONCRETE FINISHING BROOM:
amzn.to/2UytU2B
CONCRETE SCREED:
amzn.to/2WZxtwm
CONCRETE EDGER:
amzn.to/2GbGkEp
CONCRETE GROOVER:
amzn.to/2PaL414
MY CONCRETE SLAB COURSE:
mike-day.mykaj...
The best tools for doing concrete work like I do:
www.everything...
SUBSCRIBE to my email list and get my FREE video guide on how to get the perfect broom finish on a concrete patio:
forms.aweber.c...
Follow me on Twitter:
/ creteexpert
Follow me on Instagram:
www.instagram....
Follow my Facebook Page:
/ everythingaboutconcrete

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 98

@latinoandproud14 2 года назад

Mike ,we need more people like you in this world, thanks for sharing ,you are a good man and a excellent craftsman, thank you again.

@2mikeherzog Год назад

thanks for quick informative vid. 👍 I want to DIY this in my 2 car garage because the estimates were between 5-7 thousand dollars. I recognize that this is hard work, but I don't have the funds to pay it. After watching this, is it possible 1 person can pull the straight edge edge, and would the concrete driver wait because it takes so long while one 55 year old person mags the edges?

@B2tww 4 года назад

Thank you for this video! I am impressed that you are so willing to openly share your experience and knowledge. Your videos are great. Keep 'em coming!

@MikeDayConcrete 4 года назад

I appreciate that!

@garlicdawg 4 года назад

if im not in a hurry could 2 men do this w/bags of concrete taking a few days like a D I Y....not sure if i can get a truck out to the boonies where im gonna be....or is it just not realistic as a D I Y...

@EagleLakeWoodworking 4 года назад

I'm doing a similar project right now and considered doing it myself. One of the contractors that estimated the job wanted to put dowels around the outside to tie the slab into the foundation wall. What are your thoughts on this? I also noticed you didn't use an expansion/isolation joint around the perimeter. Is it typical to not do dowels or an expansion/isolation joint? I'm in the northeast.

@MikeDayConcrete 4 года назад

If the gravel is compacted correctly there's no need for dowels. If you feel it could settle then go ahead and dowel. Most our residential floors don't have expansion joint around the walls. Only if the spec calls for it. It is a good idea, nothing wrong with putting it there. We haven't had any problems with not using it though.

@EagleLakeWoodworking 4 года назад

@@MikeDayConcrete thanks for the reply and info Mike! You're an inspiration and wealth of knowledge for do it yourselfers and pros alike. I really appreciate all the knowledge you share in your videos.

@ScottCommonsenseprofessorCrawf 4 дня назад

I have 1 question. Where is the rebar. I didn't see any laid down before you poured the concrete. End result of not having it... Cracks

@leibennafield6824 3 года назад

Mike I have a question you mentioned that you used 3,500 psi concrete. The minimal is 2,500 and ideal is 4,500 psi. Why didn't you use 4,500 psi? Is it because the fiber mesh provides a reinforcement?

@ronbonofiglio7654 3 года назад

Can an epoxy finish or any finish be done over just mag floating, thereby eliminating the need to steel trowel ?

@christopherhaak9824 3 года назад

Yes, you don't need to steel trowel for a finish. If you wanted for floor smoother, you could fresno float it after bull floating.

@dandunning4409 3 года назад

Strange watching you add chloride to the load. When the customer (you) call and order the concrete from us we ask what you want such as mix, retarder, fibers, color, chloride, air etc etc and that all gets put in the drum at the same time as the agg, water, cement. This way we are ready to pour it out when we get there. No need to sit and mix for another 15 minutes on job. However once in awhile will get a customer that wants to add some accelerator or a color that we don't have but that is very rare. Having a color machine that puts in the color while being loaded is a HUGE time saver and the load generally has more time to mix so again we don't have to sit on site mixing. Nice job guy's. Wish you guy's were in our area, from what I have seen you would be a great customer to pour for.

@jameswilliams2719 Месяц назад

Hi I’m wanting to make a 20x20’ slab for a garage floor ( I know absolutely nothing about concrete ) any step by step videos out there ?

@yvesjolicoeur747 5 месяцев назад

Hi Mike, Thanks for the great contents. I am helping a friend fix is broken slab in a 20x22' garage. We are going to cut, break and remove old concrete. Then he wants to remove the river stone and replace with crushed gravel and compact. For a 2 car garage/low traffic, would you recommend fibres in concrete or rebar /wire mesh? Thanks

@yopappy891 5 лет назад

Hey Mike Great video as usual, I do have a couple of questions regarding fiber mesh and Calcium Chloride. I occasionally help a friend who has poured for years. He is a pretty frugal guy and insists on adding the fiber to the load himself, what do you think is best to have it batched or add on site. I was also curious about the type and amount of Calcium Chloride you are adding and do you ever have this added at the plant? Thanks again I have purchased your videos online.

@MikeDayConcrete 5 лет назад

We add fiber at the plant, but have added it at the jobsite also, just need to mix it in very good if done on site. We use the brand of CC that the concrete company provides, no special brand.

@mrclean146 2 года назад

I've watched a ton of your videos. I'm not even close to thinking about attempting something like this but you certainly make me feel I can do it. I think I'll attempt a small pad. Something to just to stand on like a soap box letting everyone know my buddy Mike showed me how to do this.

@theefson 4 года назад

Why you don’t use 4.000 concrete it’s garage floor it’s gonna crack

@MikeDayConcrete 4 года назад

3000 is all that's needed in a residential garage if the sub-base is prepped properly. Our 3000 mix, when tested, usually breaks around 3500.

@stankormy5717 5 лет назад

That concrete mixer truck is amazing!

@franklinbrown8417 3 года назад

Looks good! Thanks for posting. I need to pour a floor in an existing metal garage. This was helpful.

@geomundi8333 4 года назад

building small barn for my alpaca; this is great. Thank you!

@MikeDayConcrete 4 года назад

Glad it was helpful!

@stevemollis5416 4 года назад

great job.......thank you for sharing the video

@MikeDayConcrete 4 года назад

Thanks for watching!

@solarflare4259 2 года назад

Great video! Must pour a 30x20, 5 to 6 inch thick concrete slab for a carport where I can work on my cars next to my house; use a hoist to pull an engine out, jack stands etc... The ground is slopped so it makes it impossible for those operations .I have more work to do to level it off preparing the area for concrete....This video was very instructive. Thank you for posting!

@MikeDayConcrete 2 года назад

Sounds great!

@willk3807 4 года назад

I probably won't get a response back but how much did you charge to do this floor?

@MikeDayConcrete 4 года назад

Carl, if you join my private facebook group "Concrete Ninja's" I can talk about pricing. I don't talk about it on this channel.

@JuanjoMaglione Год назад

Why didn't this job get its iron bars at the bottom under the concrete?

@FelixZolko 4 месяца назад

dearest Mike, could you do a video on sub base? i dont see it covered a lot.

@mikesthilaire9807 Год назад

My garage is similar in size, whats the costs to pour this 6 inches thick?

@myronsmith2114 4 года назад

Short but Sweet

@MikeDayConcrete 4 года назад

Nice, thanks.

@Tom_M_Riddle 29 дней назад

Why no rebar support for this pour?

@Jesse-gv9tf 5 лет назад

What is re-bar good for? is it not necessary? I'm looking for a contractor in Los Angeles to do a walkway and doing a little research before having them come out.

@MikeDayConcrete 5 лет назад

Rebar is to help reinforce the slab, floor, sidewalk, when it cracks. The rebar will hold the concrete together and tight and not let the crack open up.

@doubletap855 7 месяцев назад

Are you near buffalo ny

@farmerbob139 5 лет назад

good job Mike. just wondering, do you prefer 1 3/8 or 1 3/4 bull float handles? I'm thinking of buying a rock it attachment for a 48" bullfloat.

@MikeDayConcrete 5 лет назад

We use the 1/3/4 for ours, but both are good.

@farmerbob139 5 лет назад

@@MikeDayConcrete thanks mike, it's great to get insights from a pro.

@jasonashleyh 5 лет назад

What did they do about getting the concrete under the edge of the wood framing?

@MikeDayConcrete 5 лет назад

We usually vibrate it if we have to get it under something. Not sure if that's what we did on this one or not.

@roxstarrestorationllc6438 Год назад

How much would a 22’x40’ garage slab cost approximately

@dougstobaugh376 Год назад

Making good money that's a really easy gravy job. GOD-BLESS.

@nicks8063 Год назад

Should garage floors be smooth cause they poured my concrete and it's has a texture just like my driveway

@therenaissancewoman2080 3 года назад

I am planning on doing a garage floor at some point. Just doing my research now. Would it be possible for me to do a 24'x14' by myself? If I got the concrete so it won't dry out so fast. Is it possible to do solo??

@Retro_80s_Guy 3 года назад

The average homeowner doesn't know industry slang....so when you say you're "magging" the edges, we have no idea what you mean....

@1969Fox 2 года назад

AWESOME! I've gotta do this on a little 2yd garage and was wondering how you screed when there's walls. Just walk around in the concrete while screeding. And have a pole long enough to get to the back with the bull float. And the hand tools were good to see. I was looking at buying a bull float but for 1 job I'll probably make one, but nice to see the other tool too.

@alizcool1 4 года назад

You make this look so easy!!! I only want to pour a tiny garage but can't get the courage

@srortiz78 5 лет назад

How much of a down grade did this garage floor have, I had a foundation company come out to check my foundation specially in my garage floors because my sons skateboard will just roll all by it’s self toward the garage door but they said my garage floors where ok they measured -2.3 inches on the right side of the garage near the garage door and -2.9 inches on the left side of the garage near the garage door they said the downgrade is normal , I know there is a down grade but I was not sure how much of a downgrade is normal, I hope you can answer my question thank you in advance.

@notsure6731 Год назад

Excellent video good job. Thank you.

@Reddylion 4 года назад

nice

@LilLonely915 2 года назад

Loved ur video. Thanks. it helped me out alot on a lil project I've been wanting to do for a while now. Came out great. Thanks again

@Drew-yy4sp 3 года назад

What’s up mike I have a couple questions about a concrete floor I plan on doing in my garage and way I don’t contact you ?

@Coconuteez 3 года назад

Where is the reinforcing mesh?

@MikeDayConcrete 3 года назад

It's in the concrete, called fibermesh.

@Jake.Gentry Год назад

I’m so tempted to try it on my 24X24 garage that I’m building

@manuelsantiago6956 Год назад

👍 thanks

@caseywilson5812 3 года назад

Could you do a video on a concrete driveway and how to pour one? My driveway is taller than my garage because the alley has been backfilled so many times by the city.

@TheLtrentlage 4 года назад

Where the garage door would come down, Wouldn’t it be normal to put a board to lower the concrete slightly and form a pocket for garage door sit in to help keep the rain out? It looks like in the video they concrete all the way past where are the future garage door is going.

@2cool4spool16 2 года назад

Wish you were local, I’d pay you to do my garage needs it bad

@alexg8849 5 лет назад

Vapor barrier not use in your area?

@MikeDayConcrete 5 лет назад

In house floors we do but not usually in the garages.

@wildrcs4672 2 года назад

Awesome video! I learned everything I needed from this video any question I had was answered and even questions I didn’t know I had were answered! Thanks man I also enjoyed that you didn’t sit there giving a back story about the job forever and did t talk about other crap nobody cares for!

@BassJaco71 4 года назад

How do you ensure it's level or slightly slanted to drain water outward?

@MikeDayConcrete 4 года назад

We use a laser level to check out slopes and make grade marks on the concrete walls that are sloped. All done with the laser level. This is the one I use: amzn.to/3hKXoBS

@BassJaco71 4 года назад

Very cool thanks for link.

@ianboi1638 3 года назад

Awesome pour! Question, why did you not use a tamper?

@TheDavidchicken 2 года назад

how much does the concrete usually cause for your average garage?

@kendrickbrayboy5897 3 года назад

How much would something this size cost

@jaysmith7526 2 года назад

When do I use a squeegee? Is it for spreading or the finish?

@randbthug007 5 лет назад

is this something you think a guy can do himself

@geraldhiwauli426 3 года назад

Another awsome job well done. Thanks mike and all the guys for all the great videos

@scottymizzo415 4 года назад

what is the cost of the concrete per yard?? the video was cool thanks

@MikeDayConcrete 4 года назад

In Maine it's about 110.00 per yard for 3000 psi

@javierochoa432 4 года назад

Mike Day Everything About Concrete so what’s the total on this ???

@Anon-Amos 4 года назад

@@javierochoa432 5.5 yards x $110 per yard = $605 for 3000 psi. Video says it was 3500 psi, so around $800 I would guess.

@joepop4673 4 года назад

How many ppl on the job site?

@martybumann6793 3 года назад

Love the videos Mike More informative than most anything tv has to offer

@ayosilva 3 года назад

Thank you for sharing.

@arielalejandrito Год назад

Loved the team work 😊

@Ian3199 3 года назад

Hi Mike, great video. I am about to pour my garage slab 6m by 6m. I notice from your videos that you don't have expansion joints for garage or house slabs. Is it because it's out of the elements so won't expand and contract? Cheers

@nickk05281982 7 месяцев назад

Most comeback and cut it later

@loopbloke 4 года назад

My grage is chipping. A guy told me thats coz who ever did the floor did not put locks in. I didnt understand what that means. Don't you have to tie steel rods before you pour?

@nickk05281982 7 месяцев назад

What did you mean by chipping? Rebar will keep a cracking from spreading and might keep it from cracking. There are things you can do to prevent the cracks like using stronger mix adding fiber laying a thicker pour. The pad in front of our cabin was a foot thick layed on top of clay/sand it’s moved all around but no cracks. Concrete is expensive most don’t want to pour thick

@darrinmc 3 года назад

Do you ever add a vapor barrier under a garage slab? My garage floor needs to be replaced due to it not being sloped correctly but it's also very damp in the garage all the time. Was wondering if something under the concrete would help dry it out some.

@nickk05281982 7 месяцев назад

If you plan on heating you can do that and insulate