Тёмный

Powerful COILGUN | Magnetic Games 

Magnetic Games
Подписаться 6 млн
Просмотров 451 тыс.
50% 1

This is a completely analogue coilgun, generally the ignition timing of the coil is electronically regulated to be precise and performing, I wanted to experiment with a fuse system that allows you to obtain a similar result.
The fuse system is more spectacular but very difficult to calibrate. The goal is to have the coil generate the magnetic field for only a fraction of a second, only until the projectile reaches the center of the coil. When the projectile reaches the center of the coil the magnetic field must cancel out to allow the projectile to exit at maximum speed.
Optimizing this system cost me a lot of time in testing each component of the experiment such as:
1) the distance of the projectile from the coil (for this reason the graduated barrels),
2) the dimensions of the fuse made with aluminum foil (6mm wide for the ball throw and 8mm for the pointed projectile)
3) the power delivered by the capacitors, initially I would have liked to put 4 63V 0.1F capacitors in series but having achieved a rather scary result with only 2 capacitors or preferred not to add others.
Obviously changing one of the aforementioned parameters slightly forced me to recalibrate the other 2.
I thank my friend Ferdinando for the help he gave me in carrying out this experiment
/ @ferdinandoantinoro
LIKE & SUBSCRIBE HERE: bit.ly/Sub2MagneticGames
WATCH MY TOP VIDEOS HERE: bit.ly/MagneticGamesTopPlaylist
On my channel you will find all the ways to have fun with magnets divided into 3 main categories:
Classical magnetic experiments such as magnetic levitation, homopolar motors, small magnetic weapons, Gauss cannons, gears, magnetic field viewers and much more.
Satisfaction video like the construction of magnetic sculptures, slime and magnetic putty and product review.
ASMR relaxing videos to watch but above all to listen preferably with stereo headphones to be able to appreciate the particular sounds of the magnets
Follow me:
www.magneticgames.eu/
Facebook
/ magneticgamesit
TikTok
/ magneticgames_official
Instagram
/ magneticgames_it
About Magnetic Games:
All ways to have fun with magnets.
The magnetism has always intrigued me. The strength of the magnets is scientifically explainable but there's something "magical" about its interaction with the world. My Channel offers you curious experiments and fun games to do with magnets.
Powerful COILGUN | Magnetic Games
• Powerful COILGUN | Mag...
Magnetic Games
/ kappaquellobello
#magneticgames #coilgun #electromagnet

Развлечения

Опубликовано:

 

27 окт 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 185   
@amazingsupermaster7757
@amazingsupermaster7757 6 месяцев назад
Amazing very amazing and dangerous experiment... But you achieve all the goals successfully...Congratulations 🎉 Best of luck ❤
@coledavidson5630
@coledavidson5630 3 месяца назад
The aluminum foil fuse is a pretty clever solution to avoid expensive and complicated semiconductor setup
@tehbignic
@tehbignic Месяц назад
timing via sacrificial fuse is very novel and elegant. and spectacular! well done.
@brokeneyes6615
@brokeneyes6615 6 месяцев назад
The title of this video should be: How to build a futuristic home defense platform on a shoestring budget.
@Meltz14
@Meltz14 4 месяца назад
I dunno, those caps look expensive
@massimodevitis6069
@massimodevitis6069 6 месяцев назад
never seen a coilgun* (wops) that uses a fuse to interrupt te currwent. it's beautiful.
@lusa3002
@lusa3002 6 месяцев назад
Coil gun, rail gun works is diferent.
@hgg-ws4bc
@hgg-ws4bc 6 месяцев назад
Thats a coil gun, not a rail gun
@UnknownZYX_4085
@UnknownZYX_4085 5 месяцев назад
bruh, it literally says in the video title "powerful COILGUN"
@user-even-duller-brain
@user-even-duller-brain 5 месяцев назад
Sir when you said railgun i now got confused...can i ask why you said railgun?
@andrew32155
@andrew32155 3 месяца назад
​@user-even-duller-brain because, it's common for people to confuse anything that "Launches a projectile with electromagnetisim" for a "railgun." I think "railgun" is a more popular word because of its military connotations. And the word somehow subjectively sounds "tougher" than "coilgun." Obviously, in a railgun, the projectile actually shorts current between the rail, and Lorentz forces and the incredibly violent arc propel the projectile. Where a coilgun is essentially a toroidal electromagnet, forming a solenoid with a free moving core, and ideally, current ceases before the coil tries to pull the solenoid-core/projectile back in. It is a lot like how the Doom video game created generations of people thinking that an electrically driven multi-barrel rotary machinegun, a "Gatling" is called a "Chain Gun." Perhaps because they think the barrels fire sequentially in a chain. When an actual "Chain Gun" is something like the Bushmaster line of medium caliber (somewhere around 20-30mm) automatic cannons, like found on the US Bradley Infantry Fighting Vehicle or the chin turret of an AH-64 Apache helicopter. And the Bushmaster is called a Chain Gun because the bolt & feed mechanism is literally formed & connected and driven like a few enormous links of a bicycle or motorcycle drive-chain. And "Chain Gun" just tries to become a more universal term, because it sounds "tough." Maybe like "beating on something with a heavy chain." 🤔
@rashalghul007
@rashalghul007 4 месяца назад
Adding some rifling in the bore and fins for the projectile would up the game 😌
@andrew32155
@andrew32155 3 месяца назад
It's a fascinating topic to discuss, because so mamy mechanical & physics principles are involved. Rifling a coilgun would have a good chance to get the projectile stuck in the bore, at least not without an enormous amount of force. And one coil alone is inefficient, and cannot usually accelerate the projectile much faster on its own, no matter how big or powerful its made. One has to stage a sequence of coils, each one providing acceleration in perfect sequence & timing faster and faster, usually with digital electronics & LED's making "light gates" with a photo-sensor of some sort. In an actual gunpowder firearm, and the relatively soft copper & lead of the bullet actually press-fits itself into the rifling grooves. There are obviously .177 bb's that are steel, and those airguns are rifled, but it mainly works because the bb is so tiny and light. A bigger projectile from a coilgun wouldn't pick up much, if any spin that way. And the bore contact needed only slows the projectile down through friction, unlike an airgun or firearm, where that friction also provides a seal, and gets more work out of the expanding gas, which overcomes the friction in a useful trade-off. Fins and aerodynamic drag stabilization is a better idea, but still complicated. There's certainly a ton of 12 & 20ga non-spinning shotgun hunting slugs that work on the principle. However, with a coilgun, there's some limitations. You need ferrous metals for the projectile, or at least a significant amount, so the magnetic forces in the coil will make it will move. This means you need a longer projectile than a lead one to get the desired mass. And the longer rod-like projectile is better at being moved by the magnetic force in the coil too. The problem is getting useful fins on a projectile that cannot be wider than its body in the bore. Fins that taper within the diameter of the body can work, sort of like the elongated tip of a Phillips screwdriver, but unlike visibly protruding fins like a more traditional arrow or ricket shape, they do so poorly. Backwards flip-out "knife fins" like the tail of a little mini RPG grenade would work, but be insanely complex to make. It's possible to configure the coils and projectile to impart spin through magnetic forces along with the main driving force pulling the projectile forwards, but that's very difficult & complex too.
@sapereaude155
@sapereaude155 4 месяца назад
New idea: Magnetic artillery
@gus473
@gus473 6 месяцев назад
Excellent build and slo-mo camera work! Satisfactory marksmanship. 😉🤣✌️😎
@bitonic589
@bitonic589 29 дней назад
You should not wind your coil backwards, it decreases your strength. When starting a new layer, wind to the start once, and start winding forward again. When you wind backwards, it cancels out, making it the strength of only 1 layer with increased resistance.
@edwingrandas745
@edwingrandas745 6 месяцев назад
Increíble como se vaporiza el aluminio 😮
@tom-on
@tom-on 6 месяцев назад
love the foil fuse
@user-rc7lk2vq8l
@user-rc7lk2vq8l 12 дней назад
Linear synchronous motor This is my graduation project in several stages
@PuretyLead-bg5wv
@PuretyLead-bg5wv 3 месяца назад
Many thanks for your efforts sharing this.
@NetherWolfAlpha
@NetherWolfAlpha 6 месяцев назад
how to murder someone with magnets
@OOver-_-OO
@OOver-_-OO 6 месяцев назад
there is GR-1 ANVIL
@supposeitexperiments
@supposeitexperiments 3 месяца назад
very nice video, i was not expecting that the coilgun will really working, but it is really working 👍😀👍👌😂
@Kereusx
@Kereusx 6 месяцев назад
This one aint a toy but a real weapon
@ZombieSlayerBO2
@ZombieSlayerBO2 3 месяца назад
35mph 8mm steel ball might bruise a squirrel. That’s about it
@w1111-vs3dd
@w1111-vs3dd Месяц назад
​@@ZombieSlayerBO2bro not everyone's skin is made of tungsten
@Dimabuxaet
@Dimabuxaet 2 месяца назад
You can also use the magnetic field from big coil to brake the circuit.
@andrew32155
@andrew32155 3 месяца назад
Hmmm... besides providing a useful current cutoff that stops the coil from trying to pull the projectile back in, I wonder if the explosive foil fuse... it provides a fast rise-time spike in voltage/current as well, that makes the coil more efficient? 🤔
@ek0611_theGamer4L
@ek0611_theGamer4L 8 дней назад
“the first gun was invented in the year 1000” *people in 999:*
@J0ermungand
@J0ermungand 6 месяцев назад
I would've liked seeing you vary the thickness of the sacrificial aluminum strip. Could've optimized energy transfer to the projectile that way.
@RickGrimes807
@RickGrimes807 6 месяцев назад
Why don't you do it?
@J0ermungand
@J0ermungand 6 месяцев назад
@@RickGrimes807 because I don't have a bank of supercapacitors and powersupply to do this
@tempjadho
@tempjadho 4 месяца назад
Hi would you like to explain how you could do that.
@lidotrijsturis
@lidotrijsturis 4 месяца назад
with a 30lb bow i can do more damage to a sheet of foam at 30m. But as an experiment - very interesting, good work
@husseinwassim9812
@husseinwassim9812 5 месяцев назад
at 1:43 till 1:44 if u play the video using" , " key and "." key you can see the coil get tighter right when the spark happens and at 2:10 to 2:11 the coil guns moves back like it has recoil
@DrMJT
@DrMJT 6 месяцев назад
Make this with a ten metre diameter hole and the length of the coil in a circle with a diameter of at least 100km. A payload 'packet' could be accelerated around and around, sufficient number of times, until the packet payload had orbital velocity... It would be a very cheap, effective, efficient - method of launching things from Earth into Space. The circle of coils of wire built below ground with a divert tube at 45 degrees (use a mountain) to get more elevation. I have been describing this for decades but no one seems to be interested in the ability to launch many tonnes into orbit for just the cost of a little electric current!
@MRNDESO-ps7bz
@MRNDESO-ps7bz 6 месяцев назад
😂😂😂👍👍👍👍
@rokaq5163
@rokaq5163 6 месяцев назад
"A little" electric current which would be enough to power entire cities for a single launch doesn't seem very cost effective, even less so given the insane infrastructure needed to properly have it launched. You're pretty much describing an open-ended mass accelerator. Not particle accelerator, mind you, but MASS accelerator. Go take a peek at what the LHC cost and multiply that hundredfold, at least. It's just not viable, and this idea has been pitched before to no avail due to energy and budget constraints. Engineering is the art of adjusting to constraints and making the most of what's available. And that includes costs of all types, be it energetic or monetary.
@1islam1
@1islam1 6 месяцев назад
@@MRNDESO-ps7bz ⚠️ God has said in the Quran: 🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 ) 🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 ) 🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 ) 🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 ) 🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 ) ⚠️ Quran
@r5a773
@r5a773 4 месяца назад
А в космосе ты как ловить будешь???
@DrMJT
@DrMJT 4 месяца назад
@@r5a773 Основная средняя школа Класс естествознания Образование: Земная гравитация хорошо! Если ракета запускается с поверхности Земли, ей необходимо достичь скорости не менее 7,9 километров в секунду (4,9 миль в секунду), чтобы достичь космоса. Эта скорость 7,9 километров в секунду известна как орбитальная скорость. Для запуска с достижением земной гравитации Ну, иначе говоря, скорость убегания составляет 11,8 км/с... «Скорость убегания» - это баллистическое требование, поэтому, если вы стреляете пулей с поверхности Земли, по крайней мере, если она не летит от Земли Со скоростью 11,8 км/с он будет постоянно замедляться под действием земной гравитации (почти постоянное отрицательное ускорение) и никогда не покинет земную гравитацию.
@SANTOSHKUMAR-zo4ef
@SANTOSHKUMAR-zo4ef 5 месяцев назад
This idea was literally amazing ! i will try it out too
@doubleooh7337
@doubleooh7337 27 дней назад
Have you tried it with higher voltage capacitor instead?
@TuncayAyhan
@TuncayAyhan 6 месяцев назад
lmao. my guy made a deadly weapon, not knowing it's a deadly weapon
@tristancanaleta2966
@tristancanaleta2966 Месяц назад
May I know the list of materials that you used? Thank you!
@grimyhq3807
@grimyhq3807 3 месяца назад
Now find a way to compact it all together into a gun
@MagnetTricks
@MagnetTricks 6 месяцев назад
Very cool project!👍👍
@jorgerosales1761
@jorgerosales1761 3 месяца назад
Instead of cans experiment with meat, also it would be interesting to see different sizes of coils and its force
@sulfur-fg1go
@sulfur-fg1go 6 месяцев назад
コイルガンって設計することが意外と難しいんですよ 大きいコンデンサ(青い円筒形のやつ)と、コンデンサ容量と弾体の大きさに見合った適切な大きさのコイル、大電流を少ないロスでオンオフできるスイッチング素子などを用意して、それらを完璧に発動させることがとてつもなく難しい。 さらに引き込み型コイルガンの場合、弾体を発射するときにコイルに電流が流れっぱなしだとブレーキになって初速が爆下がりするから弾体がコイルの中央を通過するまでにどうにかして電源を遮断しないといけない。この人はそれをアルミホイルでやってるのが素晴らしいアイデア。 この装置すごいですよ。作ろうとして諦めたことある僕がいうから間違いない。
@MagneticGamesIT
@MagneticGamesIT 6 месяцев назад
Thanks ... To find the right configuration I made about a hundred attempts
@user-kq1tz1qf8h
@user-kq1tz1qf8h 6 месяцев назад
единственно верное решение поставить в центре тот самый контролёр! который будет говорить объекту , тут середина. все довольно просто, катушка в виде песочных часов.
@The-Mad-Taoist
@The-Mad-Taoist 6 месяцев назад
Can you do the same with a spark gap?
@user-kv6lw4cp4u
@user-kv6lw4cp4u 19 дней назад
فكره حلوه ❤
@exisfohdr3904
@exisfohdr3904 3 месяца назад
Instead of wrapping the coil wire back and forth, try a single coil, then wrap a completely different coil on top, then a third, ect. Run the coils in parallel. This will increase the acceleration as the current will flow through all coils simultaneously and in only one direction. With the demonstrated setup, the magnetic field travels forward, but then backwards, acting as a damper. Additionally, coils in parallel reduce the overal resistance, allowing more current to flow. More current means stronger magnetic field.
@MagneticGamesIT
@MagneticGamesIT 3 месяца назад
Thanks for the tip
@exisfohdr3904
@exisfohdr3904 3 месяца назад
@MagneticGamesIT you can also overlaping the individual coils but will need a more complex timing sequence for initialization. This would require separate capacitor banks for each coil as well.
@shortriderfamily4224
@shortriderfamily4224 5 месяцев назад
Hii sir I can automate this using embedded technology
@PuretyLead-bg5wv
@PuretyLead-bg5wv 3 месяца назад
Like to ask questions, magnetic Games How many turns of coul on how many diameter (mm) of iiron core (Hole) Voltage applied? If you can also, it draws up to how many amp? What's the length of the coil core with layers? Many thanks From Nigeria New in electronics
@MagneticGamesIT
@MagneticGamesIT 3 месяца назад
I used 1kg of copper wire 1.5 mm
@klauslaus2535
@klauslaus2535 4 месяца назад
Due to the unstable structure of the electric coil as a cannon, a lot of energy is lost.
@davidn.s4502
@davidn.s4502 4 месяца назад
Mis respetos
@fedorrodif3732
@fedorrodif3732 Месяц назад
Таак, ну это только гладкоствольное. А какая мощность нарезного такого "ружья"?...
@quellenathanar
@quellenathanar 5 месяцев назад
I like the aluminum foil fuse, however, a "spark gap" switch/or fuse may allow for even more power, and briefer circuit connect time (I'm sure there is a more accurate phrase for this).
@TheLurker-XYZ
@TheLurker-XYZ 5 месяцев назад
Spark Gap is the correct term.
@quellenathanar
@quellenathanar 5 месяцев назад
@@TheLurker-XYZ Thanks.
@uttu_tri
@uttu_tri 4 месяца назад
Can you tell me please that the used electricity in circuit is AC current or DC current...?
@quellenathanar
@quellenathanar 4 месяца назад
@@uttu_tri I'm gonna have to say DC.
@uttu_tri
@uttu_tri 4 месяца назад
@@quellenathanar and the reason behind using dc is? I'm trying to make a working model on it , basically a small and safe railgun model for school , but I'm pretty confused with currents , I don't want to destroy my school's circuit 🙂
@halityagloglu6258
@halityagloglu6258 6 месяцев назад
Amazing very amazing . ongratulations 🎉 Best of luck ❤
@Fernando-bq2oq
@Fernando-bq2oq 6 месяцев назад
Genial ❤❤❤
@Debbiebabe69
@Debbiebabe69 3 месяца назад
How do these coils work? Surely the whole thing is touching and conductive, so electricity would just flow in a straight line from the + wire to the -?
@dntfrthreapr
@dntfrthreapr 3 месяца назад
the wire is coated in an insulating polymer
@arielrizu
@arielrizu 5 месяцев назад
Why not try using relay high amp
@waelnour7147
@waelnour7147 Месяц назад
لو سمحت اشرح كيفية تركيب التجربة بالتفصيل
@tonystarks315
@tonystarks315 3 месяца назад
You should use a water melon with the linear accelerator mass
@BanriFerdinand
@BanriFerdinand 3 месяца назад
con este invento podré lanzar un Nokia 3310 al espacio y destruir con el planetas.
@sasha3856
@sasha3856 3 месяца назад
at 0:36… how can be current passing trough the wire of there’s not any power source?
@user-kq1tz1qf8h
@user-kq1tz1qf8h 6 месяцев назад
так теперь это оружие? магнитно электронное? электромагнитное?
@baconoidguy3346
@baconoidguy3346 2 месяца назад
Are the foils acting as fuse?
@ayahsadam9817
@ayahsadam9817 Месяц назад
amazing💖👍
@frommarkham424
@frommarkham424 3 месяца назад
I calculated, and the whole setup used 99 joules of electricity per fire. The maximum kinetic energy of the bullet was only 0.5 joules, yielding an energy conversion efficiency of an embarrassing 0.5%.
@w1111-vs3dd
@w1111-vs3dd Месяц назад
That's why railguns are used. Also, it's a gun not a transformer.
@user-gm7cr3wh9n
@user-gm7cr3wh9n 6 месяцев назад
とにかく穴をあけたい時に便利ですね👍
@riv0564
@riv0564 3 месяца назад
There was a good missed chance to shout "LORENTZ FORCE, GO!" while pulling the lever 😔😔😔
@dakshrana6337
@dakshrana6337 Месяц назад
how much watt it consumes for 1 hit can
@Kapalek84
@Kapalek84 6 месяцев назад
nice!
@thegreenmage6956
@thegreenmage6956 2 месяца назад
Nice. Bring it to Fallout 4 mods 👍
@zx3215
@zx3215 6 месяцев назад
Some time ago I was trying to make something like this, but I wanted to use Arduino-controlled relays. Alas, I was unable to suppress the back current (tried various diodes, no avail), it was baking the relays as they start opening open.
@simontay4851
@simontay4851 5 месяцев назад
Use a high current, low voltage MOSFET.
@user-nw2of9mt6o
@user-nw2of9mt6o 4 месяца назад
Ртуть жидкая+киноварь порошек+золото+ медь+ магнит и разряд от зажигалки пьезовой.
@human3444
@human3444 5 месяцев назад
Does the fuse have to burn to generate energy?
@Eviel1n
@Eviel1n 5 месяцев назад
The fuse is there to quickly kill the electromagnet. When the projectectile is "behind" the coil and the magnet is activated, it's being accelerated in the correct direction - down the barrel. However, if the magnet were left on the whole time, as the projectile passed the center of the coil, it would start to be pulled backwards and ultimately stopped in the barrel rather than flying out and striking the target. You can see them demonstrate this at the beginning of the video. Switching is one of the issues with coilguns. Theoretically, they have some big advantages over railguns. In practice, however, the challenge of being able to quickly and precisely power up/down the sections of a multi-stage coilgun is a major headache that's limited their speed thus far.
@human3444
@human3444 3 месяца назад
@@Eviel1n Thank you vary much. 🙏🌹❤️
@razorintube
@razorintube 6 месяцев назад
brilliant job
@tvbox8478
@tvbox8478 6 месяцев назад
👍👌
@ferdinandoantinoro
@ferdinandoantinoro 6 месяцев назад
Fiko sto video.
@user-ss9yp4zr1f
@user-ss9yp4zr1f 4 месяца назад
Адронный коллайдер так же работает вроде
@user-yp8ko2cy9j
@user-yp8ko2cy9j 2 месяца назад
Me encanta 👍👍👍👍👍
@tapuout101
@tapuout101 2 месяца назад
You got to tie the launcher down. Youre losing power on the kick back? 1000 fps is insane.
@PharmaEngineeringMech.Elec.
@PharmaEngineeringMech.Elec. 3 месяца назад
👌👍
@vinn7930
@vinn7930 6 месяцев назад
Can It Throw Projectiles As Small As 3mm Nails?
@MagneticGamesIT
@MagneticGamesIT 6 месяцев назад
Sure
@lvxleather
@lvxleather 3 месяца назад
Cool 😃
@bose9618
@bose9618 4 месяца назад
Could someone explain why are the two capacitors needed?
@w1111-vs3dd
@w1111-vs3dd Месяц назад
do you know why capacitors exist? it's so a lot of power can be released at once
@Days-ts2xs
@Days-ts2xs 6 месяцев назад
This could be the gun used in the future but more compact
@user-ei8vz8xy1j
@user-ei8vz8xy1j 5 месяцев назад
where gun fire now silenced (which cause mass shooting harder to notice)
@w1111-vs3dd
@w1111-vs3dd Месяц назад
Railguns are more efficient, they use repelling force instead of attracting force, which allows them to use all of the coil's power instead of just half.
@mubeenmdmubeen5107
@mubeenmdmubeen5107 6 месяцев назад
This is light speed
@roquecrafter
@roquecrafter 3 месяца назад
Fire in the hole 🗣️🔥🗣️🗣️🔥🔥🗣️🗣️🔥🗣️🔥🔥
@affinnen
@affinnen 4 месяца назад
Nice project, where did you buy your copper wire and what gauge was it?
@jjk4740
@jjk4740 4 месяца назад
brother why you want to know 💀
@AR2-15
@AR2-15 5 месяцев назад
The author of the video, how many joules does the projectile of this cannon have? Thank you in advance
@yuri_klyukin
@yuri_klyukin 5 месяцев назад
Простенькая электромагнитная Гаусс пушка😁
@user-bd3vb6mc2x
@user-bd3vb6mc2x 2 месяца назад
Эфиопы рулят 😂
@spbuddhikaspbuddhika8524
@spbuddhikaspbuddhika8524 4 месяца назад
👍👍👍👍👍👍👍
@odiedodieuk
@odiedodieuk 6 месяцев назад
Is that some kind of capacitor to the right of the switch? Edit no it seems more like a fuse. What is it?
@cikcirik8264
@cikcirik8264 6 месяцев назад
the aluminium foil acts as a fuse, the blue ones are the capacitors
@BangboSeries-hl6je
@BangboSeries-hl6je 6 месяцев назад
Wow.. Brilliant 🎉
@dinodelfavero
@dinodelfavero 6 месяцев назад
Bello e molto ben fatto, l'unica cosa che migliorerei è l'ancoraggio dell'avvolgimento, si vede chiaramente che l'avvolgimento indietreggia e questo fa diminuire, anche se di poco, la velocità del proiettile. Si potrebbe migliorare ancora cercando il punto "perfetto" dove posizionare il proiettile, facendo varie prove anche variando il "fusibile" così da trovare il miglio compromesso 🙂 Bel lavoro!
@MagneticGamesIT
@MagneticGamesIT 6 месяцев назад
Grazie. Ti assicuro che per trovare questa configurazione ho dovuto fa molti test sia sulla posizione del proiettile che sulle dimensioni del fusibile. Non dico di aver trovato la configurazione perfetta ma di test ne ho fatti un centinaio. Minime variazioni producono grandi differenze nel risultato.
@Michael-oq2wx
@Michael-oq2wx Месяц назад
Let's try 1000V, 16000uf
@neighbor-j-4737
@neighbor-j-4737 6 месяцев назад
The world's most innocuous gauss cannon tutorial, part 2...
@jayeshkulkarni3716
@jayeshkulkarni3716 6 месяцев назад
Diwali special video make you
@Sedgewise47
@Sedgewise47 6 месяцев назад
🤔Well… There’s no “fire” in _that_ “arm”! 😏…
@doublebubble9823
@doublebubble9823 5 месяцев назад
Do you know, who is Gaus? 😉 And try to imagine the name of this gun 🤦
@99.99
@99.99 6 месяцев назад
WOW! Awesome 👍 One of these days you'll get snatched off the street by the men in black 😆
@user-my1en8fv1d
@user-my1en8fv1d 3 месяца назад
It's dangerous thing
@JC-ns6io
@JC-ns6io 5 месяцев назад
Hey ! What camera are you using to get such slow motion?
@MagneticGamesIT
@MagneticGamesIT 5 месяцев назад
A Sony rx 100
@Den-po5py
@Den-po5py 5 месяцев назад
Тиристор нужен на сотни ампер , тогда фольга алюминиевая не нужна , и искриться не будет
@SIM31r
@SIM31r 3 месяца назад
Транзистор нужен.
@Dalipfunnyfun
@Dalipfunnyfun 6 месяцев назад
🙄क्या ये बहुत शक्तिशाली है ?? 🤔
@sararumianek3136
@sararumianek3136 Месяц назад
please teal me distance 😂
@Laosthaitech
@Laosthaitech Месяц назад
Your clips are very interesting. Nice to follow and exchange fun and new knowledge. Hope you will increase our following as well. Thank you very much.
@Shil6480
@Shil6480 4 месяца назад
Wire Gage & trun
@thetimeoftheendii1586
@thetimeoftheendii1586 6 месяцев назад
Cool!
@user-re5pt5tk8y
@user-re5pt5tk8y 2 месяца назад
Харкалка
@tamimhamed3149
@tamimhamed3149 6 месяцев назад
31039
@manuelvisintin9807
@manuelvisintin9807 5 месяцев назад
Year ago i building similar toy. I use 3 capacitor to 3300 microfarad charged to 310V, with lightbulb for limit charging current. For switch use 600A SCR. For safety put some diodes near the coil, connect to reverse polarity, for prevent resonation of coil and reverse fire. It's nice and dangerous toy, don't try to home.
@MUSICMANNY3
@MUSICMANNY3 21 день назад
Don’t show this to da opps 🤫🤫🤫
@samuelfellows6923
@samuelfellows6923 6 месяцев назад
😠 I’ve been click-baited ~ with a photoshopped clip of a very unrealistic/dangerous looking, of him trying to catch the projectile [if that was real he would have it lodged in his hand ⚠️😬😖]
@privat0177
@privat0177 6 месяцев назад
Welcome to RU-vid
Далее
I've Made a Powerful COILGUN | Separate Stages PCB
18:49
⚡️Building a Power Inverter⚡️ pt 3
7:37
ArcFlash Labs' GR-1 Anvil Portable Gauss Rifle
27:34
Piezoelectric Coilgun
4:31
Просмотров 4,3 млн
3 Amazing Magnetic Vortex Experiments | Magnetic Games
3:43
Designing A Self Propelling Ionic Thrust Wing
16:30
Просмотров 4,1 млн
The Future of Firearm Technology!!!
16:21
Просмотров 7 млн
Сидит в телефоне📱на уроке
0:51
Bottle Head Smashing World Record Attempt!
0:38
Просмотров 87 млн