Looks good, I. At like that over the dash2 pro i got.. but how do I make sure, rhat the Chanel look at the right can id? Can I change what id the dash look at from the ecu?
How much for the whole kit to go into a 2005 Mitsubishi Rosa/Fuzo mini bus.. Also do you have in stock the dash panel where the gauge sit in or do I have to make one up?
I'm planning on doing a body swap of a 1500 Goldwing onto a 2004 1800 Goldwing now the instrument cluster on the 1500 is old school where the speedo uses a cable on the 1800 it is electrical. Now there are dash lights that function for various things like Reverse, Side Stand, Cruise on Cruise set, FI light which also is a trouble shooting light if for any reason the engine has a fault. Now there is a ECU but no OB2 output. Are there any functions for adding more information in the instrument set up.
I’m so confused lol so when I connect to my ecu all the gauges rpm should work bc I feel like I didn’t go over any of that I’m the vid just a bunch of customization
Hey, Please contact us via either our official Facebook,Instagram or Whatsapp (www.powertunedigital.com/pages/contact-us-1) and our friendly tech support team will be able to assist you swiftly. Kind Regards, PowerTune Digital ™
Have just bought a car with the dash already setup running the haltech gps as speed input. I deleted the saved dash layouts and now the speed does not display in any layout, it just stays at zero? How do I correct this please?
Message our official Facebook, Instagram or Whatsapp (www.powertunedigital.com/pages/contact-us-1) and our friendly tech support team will assist you swiftly.
just received and installed your dash with a haltech gm sport 1000 ecu with gps speedo and can extender works but the rpm and gps keep freezing individually and simultaneously, been rebooting but this is very frustrating as it does it every 5 minutes or so? also only getting water temp no oil pressure or oil temp, 89 c4 corvette????
Can you link the initial video on how to install? Is this something a newbie can do or is it better left to a professional? Is it pretty much plug n play? I assume imma have to tap into the accessory so it turns on when the car is turned on but other than that my knowledge is very limited.
The digital dash is simple to set up if you have a supported ECU. You simply wire the dash into a 3 amp ignition source and ground. Then plug the CAN High and Low wires into the supported ECU.
Can you make a video of how to tap into the main harness to get these lights to turn on ? Only my turn signals and hazards and parking brake works but the rest aren’t illuminated and im positive i tapped into the right wire and i even went as far as grounding it
@@jamesp6128 While a wireless mouse will work well, they still need a windows application that you can load up on your PC, laptop, or tablet, that you can build your layout on and then upload to the dash.
Have tried several times to connect to Wifi and it keeps failing. It can pick up the SSID though, just doesn’t connect after the password input part. Any thoughts? And can I transfer data across without WiFi, such as through the USB or Ethernet?
