Тёмный

Prado 150 Exhaust Install 

mdags1978
Подписаться 36
Просмотров 29 тыс.
50% 1

Hi - I created this video to hopefully assist others looking at installing an upgraded exhaust for their Prado 150 series (GXL).

Опубликовано:

 

5 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 22   
@dilligaf9465
@dilligaf9465 5 лет назад
I recently installed this exhaust in my '07 120 series, I found it easier for that back bolt on the turbo to use a 3/8" or slim profile 1/2" uni adaptor and extension bars and come up along the inside of the cat. To get the tail piece in, I had to remove the fuel tank protector plate and the fuel tank strap to clear it, though I don't have that rubbing issue. And the transmission mount lined up perfectly, no mod needed there. Nice video
@mdags1978
@mdags1978 5 лет назад
That's interesting...maybe there is a slight difference (vs 150) in the bend near the rear axle.
@johngobel2635
@johngobel2635 3 года назад
I also have 120 (2009) however mine is also scrubbing on rear axle which is irritating, did you end up adjusting the hangers?
@remyche8768
@remyche8768 3 года назад
Wd40 or inox is my favourite bolt's the day before works great
@ronaldkingi2119
@ronaldkingi2119 5 лет назад
Nice vid, can we get a video of what it sounds like? I’d like to hear it . Cheers!
@mdags1978
@mdags1978 5 лет назад
Hi Ronald - sorry about the delayed response - i didnt realise i received messages/questions (i'm a novice RU-vidr). In short, the sound is hard to capture on the phone/cam. To be honest, its very subtle in relation to the difference.....definitely a little deeper under-load but still very quiet....i use my car a lot for family touring and wanted it close to stock. I believe there is a muffler delete option if you want it louder but not sure if you want a 3L diesel grumbling! :P
@misterpotato4775
@misterpotato4775 3 года назад
@@mdags1978 can you just record it please mate?. I don't mind about it. As long as I could hear it. Because I'm not pro in terms of imagining how it sounds like
@crazyethanyeahyeah
@crazyethanyeahyeah 6 месяцев назад
thanks for the video ... did you have to replace the turbo to turbo back gasket?
@johnclark5182
@johnclark5182 5 лет назад
Thanks for the video, any improvements? And what does it sound like? Follow up video!
@mdags1978
@mdags1978 5 лет назад
Sorry for the delayed response John - see my reply to Ronald above.
@felixthecat1672
@felixthecat1672 5 лет назад
How does it sound? Much improvement in performance?
@mdags1978
@mdags1978 5 лет назад
Sorry about the delayed response - RE: Sound (See response above for Ronald). RE: Performance - to be honest, i can't tell any real difference.....fuel consumption hasn't changed....i could argue that it 'feels' better under-load when towing up to about 3K RPM but i'd be clutching at straws to quantify anything. Basically, i wouldn't buy it for performance improvement (i had a hole in mine original, hence, the reason why i changed it).
@stevesanders3992
@stevesanders3992 5 лет назад
I have the same prado, does this model put some of the exhaust gases and back into the inlet manifold?
@mdags1978
@mdags1978 5 лет назад
Hi Steve - i don't believe so....that is, its essentially a direct OEM replacement - same bolt layouts, etc.
@stevesanders3992
@stevesanders3992 5 лет назад
@@mdags1978 great thanks.
@sameeragayan9092
@sameeragayan9092 6 лет назад
Nice vid, thanks for that , will you be able to post a clip with how it sounds now, thanks :)
@mdags1978
@mdags1978 5 лет назад
Sorry for the delayed response Sameera - see my reply to Ronald above.
@elliotyoung6033
@elliotyoung6033 6 лет назад
what brand of exhaust is this, cheers
@unclebob5686
@unclebob5686 5 лет назад
Good video, but in all honesty, what do you expect from 4wd Supacentre? Cheap Chinese exhaust that doesn't fit correctly. That rubber insulator you've used will pretty quickly rub through and cause a vibration.
@CatiePotatie27
@CatiePotatie27 5 лет назад
They aren't Chinese, they are made here in Australia by Berkley. I hav one of the earlier stainless pipes from them for my Prado 150 but the dump pipe cracked and Berkley replaced it no problem with the modified version with the mount going to the bell housing which stops a lot of wobble on idle in drive. I'm sure it will stop the cracking. Other than that quality looks and fitted as good as any other brand out there and the sound has a nice note to it not loud at all. Power was a slight improvement towing but then I had the car remapped and now it really gets going and pulls like a train.
@unclebob5686
@unclebob5686 5 лет назад
I stand corrected, they are made in Australia. Pity the quality is crap.
@CatiePotatie27
@CatiePotatie27 5 лет назад
@@unclebob5686 I don't no if you have had a good look at them but over the years I have many of the name brands and custom pipes done and they compare very well to those.
Далее
80,000kms later PROJECT PRADO
24:49
Просмотров 163 тыс.
James May finally drives the Tesla Cybertruck
14:15
What goes WRONG with a USED Toyota Prado (J150)
18:42
Просмотров 266 тыс.