Procolored DTF Printer Setup and Installation Guide

Подписаться 7 тыс.

Просмотров 31 тыс.

50% 1

Procolored July Promos: www.procolored.com/pages/proc...
Procolored Printer Packages:
A4 L800 DTF Printer: amzn.to/4eB6a4h
A4 L800 DTF Printer (Printer and Oven): amzn.to/3zuwlcA
A3 L1800 DTF Printer: amzn.to/3ziIPnH
A3 L1800 DTF Printer (Printer and Oven): amzn.to/45QTpOX
Ink For All Procolored DTF Printers (L1800, R1390, L805, L8058, XP600, TX800):
Procolored Ink Set CMYK and 1 White (500ml): amzn.to/3L3oAgh
Procolored Ink Set CMYK and 2 White (250ml): amzn.to/3W04muf
Procolored Ink Set CMYK and 2 White (500ml): amzn.to/3XHk4fa
Procolored White Ink (250ml): amzn.to/4eF7P8R
Procolored White Ink (500ml): amzn.to/3VGAemd
Film:
DTF Film Roll A3 (13 inch x 328 FT): amzn.to/4cCSUKp
DTF Glitter Film Roll A3 (11.8 inch x 328 FT): amzn.to/3WbK0hX
DTF Glow in the Dark Film Roll A3 (11.8 Inch x 328 FT): amzn.to/4eKbGkU
DTF Film Sheets A3 (100 Sheets): amzn.to/3VMaiFZ
DTF Film Sheets A4 (100 Sheets): amzn.to/3VMamFJ
Adhesive Powder:
DTF Adhesive Powder 500g (17.6oz): amzn.to/3RQDSJ9
➤ E-Mail: HaiandTerrie@gmail.com
MUSIC:
➤ Where we get our music (2 Months FREE): artlist.io/Teresita-329409
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, we’ll receive a small commission (at no additional cost to you). This helps support the channel and allows us to continue to make videos like this. Thank you for the support!

Развлечения

Опубликовано:

11 май 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 150

@HaiTech 8 месяцев назад

Procolored June Promos: www.procolored.com/collections/brand-day-sales-event?ref=HaiandTerrie

@justdoitright7128 7 месяцев назад

Just purchased today! You sold me on it. Thanks

@HaiTech 7 месяцев назад

which one did you buy?@@justdoitright7128

@justdoitright7128 7 месяцев назад

I got the A3 Dtf roller with the oven package Christmas Special L1800

@REALTALK150 10 месяцев назад

YOU Sir, are spectacular! Right to the point, detailed, no extras, Just perfection!

@HaiTech 10 месяцев назад

Glad you liked it!

@user-dn6ej1pi2o 6 месяцев назад

Okay, even though I have an upgraded version I came back to thank you! This video was so detailed and even though our models differ I was still able to set mine up with your video. Thank you so much for this tutorial.

@HaiTech 6 месяцев назад

Glad it helped!

@TarynCo 5 месяцев назад

Thank you for your video! I have watched others and your video is the best one. I hope you do more! I am off to watch your playlist on the procolor now. 😀

@HaiTech 5 месяцев назад

thanks for stopping by!

@robertotorres733 6 месяцев назад

THANKS TO YOUR VIDEOS I ORDER MY DTF PRINTER.....THANK YOU BRO

@DankUrbanBoss 8 месяцев назад

Thank you for this information ℹ️ I needed these type of setup videos. They should include it with the proctored unit!

@HaiTech 8 месяцев назад

they do but it was mostly in Chinese. thanks!

@tonishalwoods 9 месяцев назад

Thank you so detailed and straight to the point!

@Lily-roselashes 7 месяцев назад

Thank you so much just perfect details. Life saver thank you

@user-dn6ej1pi2o 6 месяцев назад

I need an updated version. The one I just received does not have that same roller rack and some other things are different as well

@christinalopez6241 4 месяца назад

Hi! Your video is so helpful, thank you! Quick question. When you’re using the string to get the ink flowing, instead of wasting it can’t you just squirt it back into its ink container? Or is it not okay to do that?

@HaiTech 4 месяца назад

during the initial setup process Procolored recommends to squirt it into the ink waste container. i'm sure if you just squirted it back into the ink container it's not going to do much harm. i actually thought about that when i was doing the setup, but to show the viewers i wanted to go by the book.

@mark8975 Месяц назад

hi, thanks for the videos! when pulling the ink into the dampers, why not put the excess back into the tanks?

@HaiTech Месяц назад

Procolored says not to in their instructional vieos, but they didn't give a reason why. i think you can put it back into the tanks lol. i realized that after the printer was setup.

@fiddle1999 11 месяцев назад

First of I would like to thank you for your detailed videos, I would have a need for this machine three weeks out of the year. Would I be able to clean and store the printer for 11 months without the heads drying out?

@HaiTech 11 месяцев назад

good question. you would have to ask Procolored that question directly as that is a very long time to store a printer.

@mi-jeanevanbiljon7979 10 месяцев назад

Hi, I am considering buying one of Procolored's dtf printers, the 13" Dual Heads DTF Pro, but I can't find any information about the Pro Rip software that they use. Does the ProRip have a print manager or are you able to que multiple prints at a time or does each print need to be loaded consecutively as the other print finishes? I heard that the free software you get from most companies are the pirated and altered copies of the old AcroRip but I don't know if this is the case with Pro Rip. If it is I would prefer to buy AcroRip 11 and use that but Procolored said that it will not be compatible with the printer I consider buying.

@HaiTech 10 месяцев назад

i've never used Acrorip. the PRO Rip software is easy to use and learn. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Sw9PFUHGhrM.html

@patriceharris9 11 месяцев назад

Hello, could you tell me what the extra bottle of white ink is for it says “print head unused protective solution”is that just another extra bottle of white ink or how do I use that because that wasn’t in any of the descriptions of this printer when I bought it or when I unpackaged it?

@HaiTech 11 месяцев назад

My package did not have that bottle when i received mine. It must be a something new they've added. It looks like a print head cleaning solution. this is what should be in a package if you bought the bundle. according to their website. What’s In The Box: DTF L1800/R1390/R2000 A3 size roller printer Full Set of Initial Ink Cartridges (CMYKW 5*250ml) Protective For Printhead Moisturizing Device PET roll film Buy More Procolored RIP Software Power cable/USB interface data cable InkTube/Dust Free Cloth/Syring

@AnsegaPrints-cz5eb Год назад

Hi quick question. When you finish printing, Do you leave your printer on or off until the next day? (Talking about the red switch behind the printer). Thank you

@HaiTech Год назад

off

@jcmoney11111 10 месяцев назад

Turning it completely off also turns off the agitator to the white inks. I leave my main power on sometimes to keep that process going although I know this is inefficient.

@HaiTech 10 месяцев назад

you must have the upgraded model. mine didn't have the white ink agitator.@@jcmoney11111

@krislee2636 8 месяцев назад

Do you know where I can get a new flash drive for my epson 1390 DTf printer? I can’t find mine and I need to do maintenance on it

@HaiTech 8 месяцев назад

do you need the dongle (blue drive) or the white one with the drivers and extra files? i'm guessing you would need to contact Procolored to send you a replacement Dongle if you lost the blue one. the white one, i'm sure they have a google drive or drop box or something you could possibly download those drivers from. you can contact their tech support here: join.skype.com/invite/xsXLEBvec15f

@IrisFromTexasYall 4 месяца назад

What kind of pc do I need to connect printer with? I understand windows but is there a specific memory amount I need & plug in?

@HaiTech 4 месяца назад

i've ran this printer on a cheap $100 laptop that had 128GB of memory.

@tammywickett8990 7 месяцев назад

This is a wonderful video. Can you help me though with the printing part. I have followed the instructions here and uploaded all drivers. but when I go to print. It gives me a Failure error,

@HaiTech 7 месяцев назад

try this video from procolored. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-tSQJETK8zkk.html you have to set some settings in the RIP software as well. the video may be showing you a L805 file, but you select the file that matches your printer model. example: if you have L1800, select the L1800 file. hard to explain but if you watch the video it should pretty easy to follow along.

@christinalins494 7 месяцев назад

Hello I just got my printer set up and printed a few different designs out already. The colors are coming out way different than the actual image. Would you possibly be able to tell me how to fix it. I haven’t been able to find any information on fixing the problem. Thank you 😊!

@HaiTech 7 месяцев назад

it's probably a super simple fix in the Pro RIP software. I would reach out to their support team and they'll know exactly what to do. their customer support is available after 6pm. Email: afterservice@procolored.com or you can skype them. Skype: charles@procolored.com

@yurimaldonado9948 Год назад

I just received my printer i cant wait to use it do u know what's the Wides rolls of film i can use?

@HaiTech Год назад

13 inch

@user-sf7cx7ir6v 8 месяцев назад

Does the usb need to be connected to the laptop all the time or only to print?

@HaiTech 8 месяцев назад

anytime you want to use the PRO RIP software, you'll need the USB connected. without the USB dongle, the software will not open. hope that helps

@ARMA2ARMENIA 9 месяцев назад

Hey friend you have istalled the metal arms for roller paper upside down ! 8:26 allso you forget to shake the ink bottles 15 times. 🤝

@ddeweypink 8 месяцев назад

I am upgrading from Procolored L805 to L1800 can I use film sheets instead of the rolls if so, what size film sheets can I use

@HaiTech 8 месяцев назад

yes you can use film sheets instead of the roll. if you decide to use the roll you can do that too. it can do both rolls and film sheets. widest sheet is 13 inch

@user-up3fw8qc6m Год назад

Hi, thanks for sharing this video. Can you share the files in the white usb? I having problem with the download version from procolored.

@HaiTech Год назад

the PRO RIP software version from procolored is the latest update. after you download it and install it you will need to update the dongle so that it will be able to read the new software. if you try to install the new PRO RIP and use it right away it won't recognize your dongle. when you install the new PRO RIP software there's a program that comes with it. i forgot the name of the program, something mountain. open it and udate your dongle and it will work. facebook.com/groups/194410629223200 there's also a facebook group for help.

@user-up3fw8qc6m Год назад

@@HaiTech Thank you!

@HeavyThreads 4 месяца назад

I brought a used procolored 13 Single Head A3DTF Printer Roller L1800 Panda Gen 1 & oven. I have dongle, but I cannot get access to the things inside. What do you think I should do?

@HaiTech 4 месяца назад

Did you get a white usb with it? The white USB has all of the software and drivers. You have to install those first

@aliciacolon5570 5 месяцев назад

Question do we have to install the virus protection to install the rip software? Is there another way?

@HaiTech 5 месяцев назад

you don't need an antivirus to install the RIP software.

@itsrositaaa9640 7 месяцев назад

I’m sorry, I’m very new to laptops and got the DTF had it for about a week now with still no idea how to set up. How do I know what my computer & printer is? Like A3 folder or 64 Bit?

@HaiTech 7 месяцев назад

it will run on any windows computer. do you have a windows computer? as for what printer you have, you could check your email and see what model you bought.

@reginaevans1347 7 месяцев назад

The printer that you recommended from Amazon, is it the same company as procolored ? Please explain the comparison.

@HaiTech 7 месяцев назад

Punehod and Procolored are the same company. i think Punehod is their original name before they rebranded as Procolored. when i receive packages from Procolored, the invoice and tracking info still says Punehod. if you order directly from procolored.com they have all their latest and greatest printers on there. when you order from amazon they only have a few selected printers.

@ritaurbina8281 26 дней назад

You said rinse do you dry it? Or just continue?

@HaiTech 25 дней назад

dry the syringe too

@jestcy4205 4 месяца назад

You CAN use with a Mac, as long as you use Boot Camp which is already installed on most Macs. Boot Camp allows you to have Windows on your Mac. I almost purchased a new computer specifically for this until I started researching how to get windows on my Mac and after researching found this way. 👍🏻

@HaiTech 4 месяца назад

Nice. You’ll still need a windows license which i think is relatively inexpensive

@jestcy4205 4 месяца назад

@@HaiTech Not for windows.. I didn’t pay for anything and now have windows on my Mac. I know if you want say office or something like that you have to pay for it. But not to download the windows operating system though . I can’t remember specifically how I went about downloading Windows but if you search the bootcamp process on Apples website Apple walks u though the entire process. .. when I switch over to windows my Mac boots up just as if it were windows p/c…your able to switch between the two , Mac and windows (all on your Mac.)

@jestcy4205 4 месяца назад

@@HaiTech and I am NOT tech savvy in the LEAST bit. 😂… if I’m able to do it anyone else can. Its a process to do but as long as your determined (and I was determined (to not have to purchase a brand new computer with windows opp to do this, it works.)

@HaiTech 4 месяца назад

thanks for the tips!

@jestcy4205 4 месяца назад

**He was right you DO have to purchase the Windows license (and he’s right you can get it cheap. I found a legit product key code for only $20.) .. I did the BootCamp install about a month ago to have my Mac prepared for when I received my printer. Honestly my heads fried at this point between all of the steps to do both; getting windows on Mac and also configure all the print settings for printer. (Somehow when I did the boot camp I ended up getting windows on there because that’s the entire point lol… I had to reinstall something for printer and when I did it and the printer was finally all set up it wouldn’t rip. I looked further into it and saw windows needed activated. (Thank goodness @HaiTech mentioned this because my brains so fried at this point I’m not sure I would have even realized … I had windows ..but really didn’t have it lol (because I had never paid for it up to that point. I just walked through the steps from Apple and at some point had windows installed and all seemed to be working fine .. , (I was able to use Skype and everything else which I even used to speak w Procolored people this week (on my Mac.) All was fine until I tried to rip/print which is where the disruption came from by not having purchased the activation key code. Once I purchased it I was able to print and all works perfect now.

@_thepottersclay 2 месяца назад

Hello Thanks for this video, bought the machine after watching all your videos on them. Now, I’m struggling with colours, how to increase and decrease the %, saturation, brightness… do you have any knowledge of these?

@HaiTech 2 месяца назад

I have never had to adjust the contrast. Let me ask them and i'll get back with you

@HaiTech 2 месяца назад

on the top right click the CMYK tab. there should be an area to make changes for brightness, contrast, and saturation. I have never had to mess with this setting to get great prints. you could try it and see if it helps. it could also just be your image itself. perhaps correcting the image in photoshop or a photo editing software first and then importing it into PRO RIP

@kelliejones1168 3 месяца назад

does your thermostat turn off after a certain amount of time?

@HaiTech 3 месяца назад

when it reaches the set temp

@justonnavarro4805 3 месяца назад

I think i didnt wait until my light was solid green before installing the ink now it will not work what do i do?

@HaiTech 3 месяца назад

i would contact their customer service. they will be able to walk you through. i'm sure its a simple fix. they're available after 6PM.

@costume35 7 месяцев назад

hello if i get the procolored l1800 can i get ink from anywhere when it time to topup or i must get ink from that where i got the printer

@HaiTech 7 месяцев назад

to not void the warranty you would need to buy Procolored DTF ink. you can buy from their website or from amazon. they sell them on amazon too i believe. it may be under the name Procolored or Punehod (same company 2 different names)

@costume35 7 месяцев назад

@@HaiTech thanks so much you are amazing

@alfonsobaez3240 3 месяца назад

I installed the software. It gets to the point where it rips the image, but it won't send it to print it. Would it just keeps saying error when sending to print..can u help with this problem?

@HaiTech 3 месяца назад

i would get in touch with Procolored customer service. if you go here www.procolored.com/pages/warranty-policy scroll down to where it says "need additional help" there's multiple ways you can get in touch with them. they'll be able to pin point the problem and correct it.

@JulianLuigiNocamasi 7 месяцев назад

hello i wanted to ask you if THE USB cable can i get extention???

@HaiTech 7 месяцев назад

you can us your own printer USB cable if you need a longer one

@JulianLuigiNocamasi 7 месяцев назад

@@HaiTech thanks for answer im asking this becuase looks he USB this printee have is kinda different thn the oths i saw

@chriscalderon7566 Год назад

how much did the printer cost with ink & supplies altogether?

@HaiTech Год назад

www.procolored.com/collections/dtf-printer depends on what you get. it ranges from about $2500+ USD

@Eventdesignbyfola 8 месяцев назад

Can you do the UV DTF machine

@HaiTech 8 месяцев назад

i just received my unit and working on that now

@ritaurbina8281 21 день назад

I see a small air pocket in the yellow. What do I do?

@HaiTech 20 дней назад

it should be fine. just so long as the whole tube isn't filled with air pockets. that 1 air pocket should come out as you print more

@kevinacosta2232 8 месяцев назад

Does it work with max air 13”?

@HaiTech 8 месяцев назад

it only works on Windows computers

@brookedean390 6 месяцев назад

Do you know why I keep getting “error code 1” after pressing RIP?

@HaiTech 6 месяцев назад

i'm not familiar with that error. have you tried reaching out to their customer service? afterservice@procolored.com Phone: +1 562 566 0518 Skype: charles@procolored.com

@nicoler439 2 дня назад

Pulled the ink through all my lines but when trying to pull out of waste line, nothing is coming out after trying for several minutes.

@HaiTech День назад

did you make sure all of the ink sacs are pushed all the way down on the print head?

@decarlotatumjr1738 Год назад

I need help on installing the software onto my computer

@HaiTech Год назад

on the flash drive there's a step by step guide. i believe on procolored's youtube channel theres a video about it too

@onlyfun4life873 Год назад

Which one? I can help

@user-mj9jz1we4r Год назад

how do I reset printer after getting red light on the trash icon.

@HaiTech Год назад

turn the printer completely off and back on again.

@happeebirthdae5008 2 месяца назад

is it okay to use universal inks?

@HaiTech 2 месяца назад

i would check their warranty info before trying 3rd party inks. scroll to the bottom. it's a quick and easy read. www.procolored.com/pages/warranty-policy

@lynettestarr5671 7 месяцев назад

I downloaded the driver and downloaded the pro Rip program but getting an error message that says "dongle not detected" Do you know what I might be doing wrong?

@HaiTech 7 месяцев назад

you should have received 2 USB flash drives. 1 has all of the videos and installation files. the other is a "dongle". the PRO RIP software will not load unless you have that dongle USB flash drive.

@lynettestarr5671 7 месяцев назад

@HaiTech That issue was resolved by getting a USB hub. Program downloaded and works fine now. However, now the backs of my designs are not white and are transparent. I tried troubleshooting with the company but fell asleep before they could respond back. I have drawn 5ml of ink from the waste tube a few times like they told me to do. Did multiple print head cleanings and test prints, but the backs of the designs still show the colors of the actual design and aren't white. Any idea how to fix this?

@HaiTech 7 месяцев назад

try this ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-B6CWh8yB-os.html import an image into the RIP software. then near the top right of the screen you'll see tabs on the side. one tab will say CMYK, another should say W1, and another one should say W2. click on W1 and make sure it says 100% white. do the same for W2.

@lynettestarr5671 7 месяцев назад

@HaiTech OK, I will give that a try as soon as I get back home. Thank you! I'll reply with how it went later today.

@chasedykema1898 7 месяцев назад

I just got this printer and when I hit the power button it turns on but the printer head is stuck and the ribbon that pulls it over slips and won’t pull printer head. HELP!

@HaiTech 7 месяцев назад

their customer support should be availalbe after 6pm. Email: afterservice@procolored.com Phone: +1 562 566 0518 Skype: charles@procolored.com

@sinwarrior3538 9 месяцев назад

Is it possible to use A3+ film instead of A3 ?

@HaiTech 9 месяцев назад

the max width for A3 printers is 13 inches.

@user-dy6jv8pq8u Год назад

are you printing on 100% cotton shirts???

@HaiTech Год назад

100% cotton and 50/50

@thezkilla1 8 месяцев назад

Does it work with widows 11?

@HaiTech 8 месяцев назад

yes it does

@selvinperdomo7863 10 месяцев назад

Hi my printer ink light in on all the time what can I do please help

@HaiTech 10 месяцев назад

does it say "waste ink pad error"?

@religioustay2326 9 месяцев назад

How many GB does my computer need to have to download all software??

@HaiTech 9 месяцев назад

not many. i had a 128GB computer that was able to run the software

@alfonsobaez3240 3 месяца назад

i just installed the software and it wont rip it keeps saying faliure at 99% does anyone know how to fix

@HaiTech 3 месяца назад

the last time that happen to me on the UV DTF printer it was because i forgot to install one of the drivers

@teresbeauty6074 8 месяцев назад

What computer are you using???

@HaiTech 8 месяцев назад

a cheap PC laptop i bought for $150. the PRO RIP software will only run on Windows

@donnaschaefer9978 Год назад

What size syringe?do you use

@HaiTech Год назад

not sure, it came with the printer.

@donnaschaefer9978 Год назад

Can you send a picture of the syringe

@HaiTech Год назад

www.procolored.com/collections/parts-accessory/products/cleaning-kits here is a picture of the syringe on their website

@Beccalynn070106 9 месяцев назад

Every time I press rip the job stops at 99% any idea how to fix this?

@HaiTech 9 месяцев назад

have you tried to update your PRO rip software to the latest version? www.procolored.com/pages/software-download?gad_source=1&gclid=Cj0KCQjw4vKpBhCZARIsAOKHoWRwvGi9UJ7fRMJN70cbMusJE0UtweKJuMf-cprVfwwx8uprFfM2YAgaAmEnEALw_wcB

@fernandorico5651 Год назад

Prince, please...?

@justshawnae 8 месяцев назад

Just got mine today it’s not letting me download RIP to my computer. It says CANT FIND KEY LOCK

@HaiTech 8 месяцев назад

did you receive a dongle USB? it's blue in color unless they changed it. you can download latest RIP software here: www.procolored.com/pages/software-download

@justshawnae 8 месяцев назад

@@HaiTech yes I received that one it lets me do the whole process then as soon as I try and open RIP it says CANT FIND KEY LOCK

@HaiTech 8 месяцев назад

i haven't encountered that. have you tried this? ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-GT1R0DU9dcY.html@@justshawnae

@justshawnae 8 месяцев назад

I downloaded the upgraded link. Now it says failure to print

@HaiTech 8 месяцев назад

i'm sure it's something simple. i would reach out to their tech support tonight and they'll be able to walk you through.

@Stephanii213 6 месяцев назад

This has been a mess for me lol. They sent the printer with no ink or powder and I paid for the bundle. They sent me an oven not the all in one shaker. Terrible experience with packaging and receiving the items the stand comes with no instructions. Hoping this will be worth it when all is said and done. I got the pro. So stressful.

@HaiTech 6 месяцев назад

Hi, it's common for the bundle to come in separate packages. The ink and powder is typically shipped in a separate package. My guess is so that it does not spill all over the printer. My L1800 model came in 3 separate packages if i recall correctly.

@Stephanii213 6 месяцев назад

@@HaiTech thank you. You are correct. They are arriving separately. Customer service confirmed this last night. They just forgot to tell me. Still waiting on shaker. They sent oven instead. That was human error in their NJ warehouse. I’m a little intimidated with installing the software for the pro. Do you have a step-by-step on that one or know of someone who does? I will say their customer service has not disappointed me because they are responsive, even though we are on a totally different time zone.

@HaiTech 6 месяцев назад

i only have the L1800 and the UV DTF printer. They have not sent me a DTF PRO so i don't have any setup videos on it. @@Stephanii213

@Ximena.andRoy 6 месяцев назад

What happened to me ? I just can’t printed I follow all the instructions but the printer doesn’t start printing when I send the images … the software supposed are installed okay

@HaiTech 6 месяцев назад

have you contacted support?

@erikaruiz5887 11 месяцев назад

Hello I need you help 😢

@HaiTech 11 месяцев назад

what happen

@Ximena.andRoy 6 месяцев назад

What happened to me ? I just can’t printed I follow all the instructions but the printer doesn’t start printing when I send the images … the software supposed are installed okay .. help please 🙏🏼

@HaiTech 6 месяцев назад

what exactly is it saying on the screen? or doing on the screen? did you connect the blue USB dongle, open PRO RIP, import an image, click RIP, Print?

@Ximena.andRoy 6 месяцев назад

@@HaiTech thank you for responded to me I ready fixed it apparently i had problem when I conneted my usb : )