Amaaaaaazing content .Thank you very much sir for this and for the previous video for programming ESP8266 via physical connection. You just got a new subscriber. May God lead and guide you.
you all prolly dont give a damn but does anyone know of a way to log back into an instagram account? I stupidly lost the password. I would appreciate any help you can give me.
@Fernando Joseph Thanks for your reply. I got to the site on google and im in the hacking process now. Looks like it's gonna take quite some time so I will reply here later when my account password hopefully is recovered.
Nice video! I did everything successfully (no errors, led blinking) by videotime 4:28, also sure I use same WIFI but still can not see new "esp" port in menu. Would you have a hint what else can cause the problem?
Hey Indrek, great video! Are you able to program the module over Wi-Fi without setting GPIO 0 to ground to set in programming mode (after programming once of course)? Thank you!
iam planning to file (IPR) for my own home automation project and also , I had used arduino ota libraries will my IPR will be cancel after serval test i would commercial the product
Now that we have a program on the ESP-12E / ESP-12F. Can you make a video on how to make the program run when the chip is ready to be used. NOT WIFI. maybe run a LED on pin 12.
I know it's been a while since you made this video, could you explain how to add static IP, gateway, and subnet mask to web page and eeprom save as these are not char? Thanks.
Hey, brilliant video! I'm working on a project and was wondering; once the code is uploaded and the esp disconnected from the computer, if I then connected a battery to power the esp, would it still retain the code and be able to receive sketches from the computer without a physical link?
Nice Video. Super understandable and found it easy to follow along. Ist it meant to put the code you want to program under the ArduinoOTA.handle(); and server.handleClient(); funktion in the second code? I put the digitalWrite(2, millis() % 1000 > 500 ? HIGH : LOW); blink-code in there but the LED did nothing. thx
Hey! Yes you should be able to put you code under the "handle" methods. Are you trying to flash the on-the-board LED? Maybe try to use LED_BUILTIN instead of 2. I am not sure but the LED_BUILTIN might not be number 2.
If the code you upload over the wifi also supports uploading over wifi then you can upload again. But when you upload code that does not have the OTA library then you can't do any more uploads.
Hello. Thank you for your helpful videos. I use Arduino 1.8.13 and the board version 2.2.0. The OTA example (with my ssid and password) creates a network port and is flashed through this port when working with Witty Cloud, ESP-12 and ESP-07S, BUT IT DOES NOT WORK with ESP-07 (with a ceramic antenna and a connector for an external antenna). The port appears, but when flashing through it, a message is displayed No response from device Please help me.
As far as I know Arduino IDE sees the device only if it is in the same subnet. Maybe you can do something clever with router configuration, but I don't know much about that.
Unrelated to this video, Your liveOV7670 project. I was wondering if it was possible to add a button to take pictures, videos and save to a SD card. If so, how would I do this.
I recently learned that it is possible to read data back from the screen. So theoretically it is possible to take image from the screen and save it to the SD card. SD card it too slow to save image to it directly from the camera. I am planning to do a project like this in the future. I will upload a video about it when I am ready.
hay man do I need to write this code to the ESP8266 WIFI shield or to the Arduino board its self, and is it possible to make a web controller that I can reprogram over the WIFI connection and be able to change the WIFI name and password.
Hi. Can u please write a code to me for Nodemcu Esp12e Module thank-you. ? 1. On D2 - D2, D7 and D8 off after 30 seconds 2. On D3 - D3, D7 and D8 off after 30 seconds. 3. On D4 - D4, D7 and D8 off after 30 seconds. 4. On D5 - D5, D7 and D8 off after 30 seconds.
Hey! It is an "inline if". If the condition before the "?" is true then the first value is used, if false then the one after the ":". For example this: int a = some_condition ? 111 : 222; is the same as: int a; if (some_condition) { a = 111; } else { a = 222; }
Hi, using some other similar code I can save now wifi settings on my module so i think it is something with th e code. If are you interested on what worked I am willing to colabborate with you