Тёмный

I Made a Scrap Wire Stripping Machine 

Make it Extreme
Подписаться 2 млн
Просмотров 446 тыс.
50% 1

The project numbered 0131 is a wire stripping machine using old cables for recycling purposes. It is well-known that pure copper that is included in the cables can be sold and having this in mind, we considered it wise to make a cable stripping machine.
Install Raid for Free ✅ IOS/ANDROID/PC: clcr.me/4swKdl and get a special starter pack 💥 Available only for the next 30 days!
► Get the plan: / makeitextreme
► Linktree: linktr.ee/make...
►All details about the video: bit.ly/3Kf93YR
----------------------------------------------------------
AMAZON AFFILIATE LINKS:
-------------
►Tools in this video:
Engineers Squares Set: amzn.to/3N6JE54
25FT Tape Measure: amzn.to/3hcUBDH
Mitutoyo 500-197-30: amzn.to/3sZwXQB
Marking Tool: amzn.to/3Ig0SdX
Welding Magnets: amzn.to/3JRATJU
Digital Angle Gauge: amzn.to/3h9MojF
Heavy Duty C Clamp: amzn.to/3BZ2uGJ
Center Punch Set: amzn.to/3hcWDnj
Jobber Drill Set: amzn.to/3HgsYo3
Multicolor L-Key Set: amzn.to/3t2Xxsb
Countersink bits: amzn.to/3sci2mT
Magnetic Drilling Cutter Kit: amzn.to/3HdsKy0
Camera Nikon D7500: amzn.to/3sot7l0
Useful Tools we recommend: amzn.to/3Ii2ljF
Lathe/Milling Parts: amzn.to/33JjDqX
Makita Tools: amzn.to/3t0eOSR
Videography: amzn.to/3H8jaMM
Our PC: amzn.to/3Hexljo
►Check our Storefront:
www.amazon.com...
-----------------------------------------------------------------------------
Click here to Subscribe: bit.ly/MakeitEx...
Second Channel: bit.ly/MakeitEx...
Facebook: bit.ly/Makeitex...
Instagram: bit.ly/makeitex...
TikTok: / makeitextremeshorts
Welding Machines:
Mig: bit.ly/Rallymig
Tig: bit.ly/PITIG
►Special Thanks to our new Patrons:
TOP (Jakob Keller)
Dawid, Carl Moses, Jay Hawker, Blake Paschal,
Robin Koning, kwstas zax, James Phillips Sr,
Panagiotis Kalyvidis, Leo Gothberg, Antonio Carbone,
Page A Bishop, Kelvin Hayman, Žiga Stepančič,
Andrzej Abramowicz, Ravi S Vishwakarma, Brian Ryder,
Ahmed Badr, Олександр Гавриленко, RubenGonzalez,
Andrew Miller, Ali Alzaabi
Music from Artlist: bit.ly/MIEArtlist
(Subscribe now and get an extra 2 months on your subscription)

Наука

Опубликовано:

 

28 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 272   
@MakeitExtreme
@MakeitExtreme 2 года назад
Install Raid for Free ✅ IOS/ANDROID/PC: clcr.me/4swKdl and get a special starter pack 💥 Available only for the next 30 days!
@Dan-ger82
@Dan-ger82 2 года назад
Been playing for two months now. Great game
@imaankhan7381
@imaankhan7381 2 года назад
Dear sir will you please make a iron nail header making machines video........ We want too se how do they do that..........
@baptisteramiro1918
@baptisteramiro1918 2 года назад
Here's a challenge for you , let's see if you can make a shredder from nothing but what you got in your workshop
@rupeshshah7232
@rupeshshah7232 2 года назад
I want to buy this machine wire stripper How much price for it?
@baptisteramiro1918
@baptisteramiro1918 2 года назад
@@rupeshshah7232 , Nah he dosen't sell any of the things he makes cause he uses them later for other vids
@romaniguitar
@romaniguitar 2 года назад
Wow, mind totally blown by this one. The music was great, the change in mood from one tune to the other gives it a very cool rhythm to the whole thing.
@agler_
@agler_ 2 года назад
7 years on, you are still my favorite channel on RU-vid. A life building and creating is a life well lived!
@jakobwetzel8167
@jakobwetzel8167 2 года назад
It was my second video that I watched on yt
@thelamb288
@thelamb288 2 года назад
I agree, along with "AvE" and "This Old Tony". Cheers
@joserbmr
@joserbmr Год назад
É meu canal favorito também
@matthewdunstone4431
@matthewdunstone4431 2 года назад
There’s a crazy amount of work in capturing all these video shots and then editing it all. Great result!
@northerngreg
@northerngreg 2 года назад
The production on these videos is next level!
@robii120
@robii120 2 года назад
Mesmerising! machining sounds syncing with the music is a nice touch. So satisfying to watch!
@Vasylii-09
@Vasylii-09 2 года назад
кайфовое технопорно ! но раньше изделия были круче ...но всё равно смотреть кайфово .
@котёнокМурка-ш8ш
@котёнокМурка-ш8ш 2 года назад
Красиво, надежно, мощно но зачем? Кому и для чего требуется снимать километры изоляции с проводов, или я тупой и не понимаю или это все просто для красивого видео. Кстати видео посмотрел прям с удовольствием.
@Vasylii-09
@Vasylii-09 2 года назад
полностью с вами согласен . исполнение просто супер а в остальном непонятно . видать совсем хреново , медь сдавать будет ...
@gtblack1988
@gtblack1988 2 года назад
Ну если есть доступ к обрезкам,почему бы и нет?)
@dmitriy-56
@dmitriy-56 2 года назад
просто если обжигать изоляцию, медь немного теряет в массе)) а это деньги
@Redneckmfg
@Redneckmfg 2 года назад
This officially makes you guys -- Stripers !!! Another awesome build ....
@jacobotha6158
@jacobotha6158 2 года назад
That's literally the wet dream of every cable thief in South Africa. You will make thousands if you sell machines like that over here. Awesome build. Awesome video and liked the background music.... . . can't wait for more content . . .
@christopher.m.estelow
@christopher.m.estelow 2 года назад
You are truly a master at your craft.... looking forward to the next one!! 👍👍
@iliarhein6001
@iliarhein6001 2 года назад
I don't understand how you can be so precise,perfect!
@АнтонСавельев-р7о
@АнтонСавельев-р7о 2 года назад
Вот что мне надо, супер станок!!💪👍👍
@MCsCreations
@MCsCreations 2 года назад
Fantastic work, dude! Pretty amazing little machine!!! 😃 Stay safe there with your family! 🖖😊
@mehmetkaya7154
@mehmetkaya7154 2 года назад
It was as high quality and enjoyable as a movie. Incredible 👏👏👏👏
@williamthrasher8540
@williamthrasher8540 2 года назад
The best wire stripper that I have seen so far.
@rupeshshah7232
@rupeshshah7232 2 года назад
I’m want to buy this machine how much the price for it
@sikanderrashid3820
@sikanderrashid3820 2 года назад
By far you are the best lathe master I've ever seen 👌 Love from Pakistan
@austinbeck811
@austinbeck811 2 года назад
Great editing/video quality! Beautifully built machine too. I was not expecting the level of precision you used when I clicked on the video.
@MakeitExtreme
@MakeitExtreme 2 года назад
Thank you very much!
@luzern1000
@luzern1000 2 года назад
awesome video, great filmed and edited and a great result great respect 👍
@islandseeker1260
@islandseeker1260 Год назад
I'm gonna try and make this with my drill press, angle grinder, and band saw!
@jimpritz4169
@jimpritz4169 2 года назад
Excellent video. You have extreme talent not only as a machinist but also in producing interesting and creative videos.
@LiveEnduro
@LiveEnduro 2 года назад
Класс! До последнего думал, что же на этот раз сделал этот парень!
@윤현주-u2u
@윤현주-u2u 2 года назад
우연한 만남이 이렇게….. 만나 뵈어서 영광이었어요. 유명하신 분이셨네요~~~ 다음에 광장시장 혹은 현대백화점 판교점에 놀러 오세요 서비스 많이 드릴께요 ^^* 광장시장호랭이 드림
@sergeypro-ov7091
@sergeypro-ov7091 2 года назад
Во заморочился!😂👍👍👍
@donovanleeds4012
@donovanleeds4012 2 года назад
Love it. Next step: smelting it all down.
@TheFoxranger
@TheFoxranger 2 года назад
Insane editing and craftsmanship as always 😍
@Thewatson77
@Thewatson77 2 года назад
Loved every minute of it.
@fpc0041
@fpc0041 2 года назад
true artist and machinist
@CoryHayes89
@CoryHayes89 2 года назад
Not to nitpick but one of your nameplates on the machine has a typo! Super cool build as always.
@Pest789
@Pest789 2 года назад
Man I need a six jaw chuck. Also, your camera work and editing is *tight*.
@garyjones2582
@garyjones2582 2 года назад
You guys build some awesome stuff.. Love your videos.. Take care my friend...
@mr.toliver2717
@mr.toliver2717 2 года назад
As usual nothing but bad ass work done by you 👍👊
@lazytsfarm3708
@lazytsfarm3708 2 года назад
if you can bend the output at close to a ninety, the wire will seperate from the shielding. a friend built one for stripping miles of poleline wire.
@VesperCadha
@VesperCadha 2 года назад
bearing from Poland, dziękuję dobranoc
@lolcec81
@lolcec81 2 года назад
Комментарий в поддержку канала и ролика, а также труда мастера.
@michaelkoch2109
@michaelkoch2109 2 года назад
Simply great! - Greetings from Dresden!
@kilian4393
@kilian4393 2 года назад
The video is really well done and the tracking shots aren't bad either
@kilian4393
@kilian4393 2 года назад
ok i don't know what to do
@DanKoning777
@DanKoning777 2 года назад
Beautiful! 👍
@YoogiWalbrzych
@YoogiWalbrzych 2 года назад
Awesome work! Good job!
@TheDistur
@TheDistur 2 года назад
Time to cast some copper. Nice machine.
@marianosacristangarcia5136
@marianosacristangarcia5136 2 года назад
Hola genial ..me encantan tus trabajos .y sin hacer alardeos ..deberias de estar en la nasa ..
@vinceianni4026
@vinceianni4026 2 года назад
good job mister well done
@dirttdude
@dirttdude 2 года назад
When you hoot a frigsaker do you sassafras it or just stovepipe a whistler until the cows come home?
@t0mn8r35
@t0mn8r35 Год назад
Another interesting and well done project. Hopefully your cat approved this one...Maybe your cat's name is Dipstick?
@victex80
@victex80 2 года назад
amazing work😳😃😃
@АлексейТарчинский-я2ъ
Сборка просто топ. Но блииин, ну это как-то тупо столько времени потратить, чтобы собрать машину, которая снимает оплетку. Кому это может понадобиться?
@staryi5119
@staryi5119 2 года назад
Бомжу! Перестанет добавлять СО в атмосферу при обжиге 🤣🤣🤣
@pn8902
@pn8902 2 года назад
15:27 Machinists/mechanics/engineers know this didnt work first time 🤣
@dimitar4y
@dimitar4y 2 года назад
i cringed when he did that.
@manickn6819
@manickn6819 2 года назад
The people who strip cables just light them on fire. Entire tangled piles are done in short time.
@littlejackalo5326
@littlejackalo5326 2 года назад
@@dimitar4y "I cRiNgEd wHeN hE DiD tHaT"
@dimitar4y
@dimitar4y 2 года назад
@@littlejackalo5326 but i did. i cringed. he just. dropped it. what if the balls got knocked out of the cage? They do.
@enissonvasconcelos9061
@enissonvasconcelos9061 5 месяцев назад
Projeto top
@ROADKILL4147
@ROADKILL4147 2 года назад
WOW that was alot of work good job and i want one :)
@fernandobernardes4880
@fernandobernardes4880 2 года назад
A gravação da placa faltou o t , mais tudo bem kkk.Parabens vcs são os melhores
@engmohamedwafdy1162
@engmohamedwafdy1162 2 года назад
لا اله الا الله محمد رسول الله ♥
@dmitriy-56
@dmitriy-56 2 года назад
Вон оно что) когда-то не хватало такой штуки
@ПетрИванов-ы6е
@ПетрИванов-ы6е 2 года назад
Though and furious machine. Definitely like it. Two questions i got for now. 1) Why square parts was machined on lathe? Why don't you use a milling machine for it? 2) Maybe that's doesn't important, but i'd like to know what country you from? Just curious. Best regards for you!
@Marcelo-56
@Marcelo-56 2 года назад
Enter the channel, go to "Description", last column, at the end of the text it says: Greece👈
@ПетрИванов-ы6е
@ПетрИванов-ы6е 2 года назад
@@Marcelo-56 pardon me. I didn't notice it.
@littlejackalo5326
@littlejackalo5326 2 года назад
He put the square stock in the lathe just to do something different. It's less secure, less accurate (the way he was doing it), and less convenient than the mill. Putting a piece of plate in a 6 jaw chuck is difficult to get centered.
@Chaosman88
@Chaosman88 2 года назад
yaay finally! :D
@antropik07
@antropik07 2 года назад
hello we are from the ussr
@JoZf_Gibson
@JoZf_Gibson 2 года назад
Merci
@fahad.saeed29
@fahad.saeed29 2 года назад
Brother can u share details of the machine n techinal drawing of the material size n thinness
@Mhurtle65
@Mhurtle65 2 года назад
Nice....
@Malungeon18436571
@Malungeon18436571 2 года назад
I would not want these videos to be shorter. I wouldn’t mind more footage. But I watch most of it on 2x speed.
@حسين-ج9ط7ي
@حسين-ج9ط7ي 2 года назад
الموسيقى رائعه اختيار موفق
@godlike0630
@godlike0630 2 года назад
This is not a video. THIS IS A MOVIE.
@tonho3794
@tonho3794 2 года назад
👍👍👍👍👍👍
@billy19461
@billy19461 2 года назад
Love the machine but I don’t have a machine shop to build it.
@fusen5976
@fusen5976 2 года назад
МОЛОДЕЦ МАСТЕР!! - НАЗОВИ СВОЁ ИМЯ!!! - ВИДЕО ПОТРЯСАЮЩЕЕ, ВСЕ РОЛИКИ НА ВЫСОТЕ. ИНСТРУМЕНТ - РЕШАЕТ. МУЗЫКА -НА ПЯТЕРОЧКУ , ВИДЕОМОНТАЖ НА ПЯТЕРОЧКУ , КАЧЕСТВО ОБЗОРА - ГА ВЫСОТЕ. ТЕБЕ УЖЕ НУЖЕН СКЛАД ДЛЯ ТВОИХ ИЗДЕЛИЙ. СНИМИ КАК НИБУДЬ ОБЗОР НА ВЕСЬ ТВОЙ ИНСТРУМЕНТ И ПОЛНОСТЬЮ РАБОЧЕЕ МЕСТО. ЖДЁМ НОВЫХ ДОСТИЖЕНИЙ! НО.. ИМЯ НАЗОВИ !!!
@mistermagnifico
@mistermagnifico 2 года назад
You could have made the splicing and flattening into one move you you don't have to put it back through
@samekww
@samekww 2 года назад
Bearings from Poland ?
@maurooomau6095
@maurooomau6095 2 года назад
Por como essas ferramentas dá fazer fácil moto a Kaneda real...
@masterat9113
@masterat9113 2 года назад
I just order one before watch this
@jimmywalden1615
@jimmywalden1615 2 года назад
This is definitely awesome but honestly I don’t see building a wire striped to be worth it cause if you strip enough wire to justify ha being a wire stripper like this than I think is worth buying one I bought my dad one and it more than payed for it self on the first use I payed around 200$ for it and my dad got double that just on the first use
@stanislavsky6665
@stanislavsky6665 2 года назад
Докатился чувак провода стал чистить,медь сдавать начал. Вот они санкции без монетизации!
@technokuzya5096
@technokuzya5096 2 года назад
Now, your channel is more interesting, then Diresta channel! (Sorry Jimmy)
@jstruziu22
@jstruziu22 11 месяцев назад
Where to buy this machine?
@SakellarisNikolaos
@SakellarisNikolaos 2 года назад
😀👌
@nedimbuyukafsar6434
@nedimbuyukafsar6434 2 года назад
👍👍👍
@СВОИМИРУКАМИ-в3ж
@СВОИМИРУКАМИ-в3ж 2 года назад
💪👍👍👍
@lazytsfarm3708
@lazytsfarm3708 2 года назад
apparently someone is commenting on comments claiming to be the video creator and offering a prize, if you pay the shipping. surely isn't the creator doing so.
@petepeterson4540
@petepeterson4540 2 года назад
too complex for me but go baby go
@jaideepvishwakarma3971
@jaideepvishwakarma3971 2 года назад
Sar line boring machine banaye
@ДмитрийГородец-н9м
👍
@dimitar4y
@dimitar4y 2 года назад
ahhahaahah i was wondering how you'll handle ads. Someone else voicing it for you.
@rizalsilverboy8002
@rizalsilverboy8002 2 года назад
Hadir
@crr440
@crr440 2 года назад
O is for Overengineering
@muhammadnihadk436
@muhammadnihadk436 2 года назад
First view get more views for this video and like this comment....😌😌🤩🤩🤩🤩
@systemsrenegade9888
@systemsrenegade9888 2 года назад
Your tail stock is not centred it lifts every time you centre drill or use drills to enlarge holes .
@littlejackalo5326
@littlejackalo5326 2 года назад
Doesn't have anything to do with the tailstock being off center. It has to do with slop in the quill. There is slop, and the bit gets pulled around from the spinning stock. It happens to pretty much every single lathe, to a certain degree, depending on how much slop there is in the quill. If he would have moved the carriage all the way to the headstock end, and moved the tailstock as close to the carriage as he could, he wouldn't need to extend the quill sad much as he did in the video. This would have decreased the displacement.
@romanbl415
@romanbl415 2 года назад
Wtf! Fire and a bucket with a lid!
@ВениаминПухенвальд
Серьёзно??? Я один думал что снятие изоляции в промышленных масштабах востребована только в странах бывшего СССР???
@bknickelcvn74
@bknickelcvn74 2 года назад
I have a question I need answered. I'm dropping this off to all the youtubers I follow, and this thought just occurred to me watching people all over the world that have nothing and build amazing things, and then people with everything build amazing things too, but I want to start from scratch. I have the skills and knowledge to do all of this. I don't have one question answered to get started. I want to start a list and continually improve it, and then put it into action and spread it to the world to show it can be done. You can advance quickly from nothing if you want to. So the question is, what are the minimum tools required to build every tool I would ever need, to build the tools I would ever want, to build everything and anything I would ever want or need? And in what order do I acquire these tools and in what order do I build the tools to build the next tools and so on and so forth till satisfaction is obtained? Please send lists and updated lists to my email. I want this to be a free thing for everyone. I will put up all the money needed to prove this theory of a list, or you can send me a recording of you rambling on and on about it and I'll sort through it if you have the time. I'd like to help humanity to advance past this, which we are stagnant in and putrifying. Building better, cheaper, faster, and better for our environment. Over all, our problem is technology without money, but if they have the means to educate themselves, they will care more about it. More caring means a better world.Just a thought. Bradleebear@hotmail.com
@tluanem
@tluanem 2 года назад
👍👍👍😳😳😳
@anaracarbutto6591
@anaracarbutto6591 2 года назад
tanto trabajo para pelar cable tiempo perdido
@dushig7363
@dushig7363 Год назад
Hi sir How do I buy striding monster
@Im_Ninooo
@Im_Ninooo 2 года назад
I'm no machinist but some methods used on this video seemed kinda.. unorthodox.. I still enjoyed it tho
@0646833849
@0646833849 2 года назад
Can you build a machine to open metal barrels
@jonnymiskatonic
@jonnymiskatonic 2 года назад
Sorry, couldn't stick with it. The moving camera, shifting angles and sweep edits made my head hurt. Love the builds but fancy edits for the sake of fancy edits are distracting.
@Hilux03
@Hilux03 2 года назад
👍
@toxpoint
@toxpoint 2 года назад
Yikes the typo on the front
@MrPnew1
@MrPnew1 2 года назад
Good spotting
@tatepishepard
@tatepishepard 2 года назад
As we all know for now, you're a virtuoso in metalworking but anywho produces your videos give him/ her/ it whatever a raise. It was out of this world. Thanks for this satisfying content. Awesome work as always.
@melroyel2235
@melroyel2235 2 года назад
Man, you are a genius. I really could have used this back when I was younger and my dad would recycle on the weekends. We had to strip wire by hand with a utility blade.
@manickn6819
@manickn6819 2 года назад
Nice machine but not practical. Scrap wire comes tangled. Just light it on fire and the insulation burns off.
@danny3man
@danny3man 2 года назад
OMFG so much camera movement... fk this i wont watch it....
@geirkleven3936
@geirkleven3936 2 года назад
Had to leave half way, all this tekno shit was not for me. I prefer sound of the machines
Далее
Process of Making a scrap wire stripping machine
24:17
This DaVinci Machine Unlocks Precision!
13:05
Просмотров 242 тыс.
+1000 Aura For This Save! 🥵
00:19
Просмотров 10 млн
Barno
00:22
Просмотров 619 тыс.
We Created The Ultimate Rust Removal Machine
24:44
Просмотров 457 тыс.
I Made a Hydraulic Pipe Bender in My Garage
29:57
Просмотров 690 тыс.
I Made A Cable Wrapping Machine (And You Can Too)
16:37
How Much Do You Make Stripping Copper Wire In A Day?
16:14
Распаковка 16 iPhone pro max
0:50
Просмотров 221 тыс.
Mac USB
0:59
Просмотров 23 млн