No video :(

Project 082 | Make it extreme's vibratory tumbler

Подписаться 2 млн

Просмотров 1,1 млн

50% 1

Our need for removing the rust as well as the finishing touch in various little pieces which we use in our constructions led us to our new construction with the number 0082.
► Click HERE to subscribe to Make it Extreme: bit.ly/MakeitEx...
► Second Channel: bit.ly/MakeitEx...
• Get access to the downloadable Plans: bit.ly/MIEplans
• All details: bit.ly/2rE9xAH
• Help us on patreon: bit.ly/MIEpatreon
• Welding Machine: bit.ly/Rallymig
----------------------------------------------------------
AMAZON AFFILIATE LINKS:
-------------
►Tools in this video:
Engineers Squares Set: amzn.to/3N6JE54
25FT Tape Measure: amzn.to/3hcUBDH
Mitutoyo 500-197-30: amzn.to/3sZwXQB
Marking Tool: amzn.to/3Ig0SdX
Welding Magnets: amzn.to/3JRATJU
Digital Angle Gauge: amzn.to/3h9MojF
Heavy Duty C Clamp: amzn.to/3BZ2uGJ
Center Punch Set: amzn.to/3hcWDnj
Jobber Drill Set: amzn.to/3HgsYo3
Multicolor L-Key Set: amzn.to/3t2Xxsb
Countersink bits: amzn.to/3sci2mT
Magnetic Drilling Cutter Kit: amzn.to/3HdsKy0
Camera Nikon D7500: amzn.to/3sot7l0
Useful Tools we recommend: amzn.to/3Ii2ljF
Lathe/Milling Parts: amzn.to/33JjDqX
Makita Tools: amzn.to/3t0eOSR
Videography: amzn.to/3H8jaMM
Our PC: amzn.to/3Hexljo
►Check our Storefront:
www.amazon.co....
-----------------------------------------------------------
Social Media:
• Facebook: bit.ly/Makeitex...
• Instagram: bit.ly/makeitex...
• Special Thanks to our Patrons:
✔TOP Patron: [Devin Bauste]
John Mobley, Antonio Vicente Aveiga Bello, Patrik Rusnák, Bill Switzer, dayne a schicktanz, Modesta Puniškyte, Donald MacNab, Corey Mesa, Jacobs Daniel, John E Baylor
• Playlist for all videos: bit.ly/2gZL4Dg
• Intro Design: vimeo.com/9014...
♫Music
Mat Mor Raw - Raise of Empatia
/ mateuszmorawski (CC BY-NC-SA 4.0)
Mat Mor Raw - Dogger Plant
/ mateuszmorawski (CC BY-NC-ND 3.0)
Mat Mor Raw - Branmorph
/ mateuszmorawski (CC BY 3.0)
#makeitextreme #makeitextremeshorts

Опубликовано:

28 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 497

@MakeitExtreme 6 лет назад

We would like to thanks Mat Mor Raw for the Music! Check The Artist Here: soundcloud.com/mateuszmorawski

@pawelaco 6 лет назад

the highest class, best regards

@mikedrop4421 6 лет назад

You guys are killing it! Keep up the great content please!

@StopaskingformynameYouTube 6 лет назад

I would like to tell Mat Mor Raw that the music is way too intense for this video. It's not an action scene, it's fabrication..

@spikeydapikey1483 6 лет назад

Lovin the tunes! Cheers!

@MatMorRaw 6 лет назад

Excellent video! It's great to be here with my music. Thanks for featuring my tunes :)

@timsworkshop85 6 лет назад

All action, No talking! Keep it up MiE!

@doubledarefan 6 лет назад

Another way to express it: No yack yack, all whack whack.

@mikedrop4421 6 лет назад

Man, I've never really thought about how badly I need an industrial sized tumbler in my life before now.

@elesjuan 6 лет назад

If you're a reloader, think of all the brass you could polish with this! I've seen competitive shooters use small cement mixers before.. lol

@radcow 6 лет назад

To be fair we only need what we think about

@DimaProk 5 лет назад

@@elesjuan I would probably go with small cement mixer, will last longer and wet tumbling is better.

@sgibbons77 6 лет назад

You make some of my favorite build videos - no need for a voice-over or explanation, your demonstration skills are all that's needed. Excellent work!

@Airn5475 6 лет назад

I could watch finely machined parts slide together all day. So satisfying. Well done sirs!

@adelgilani2549 6 лет назад

these type of people are an added value to the life . thanks.

@jay1st1st 6 лет назад

The shim for making an exentric is an excellent idea !!

@joelclear1578 6 лет назад

Jay - I thought the same. So simple yet yields a perfect result.

@michael-michaelmotorcycle 6 лет назад

The equipment I run at work has a lot of eccentric shafts used for adjusting pressures between rollers, printing plates & blankets. I’ve always wondered how those shafts were made. Now I know.

@danielberei3021 6 лет назад

Or you could use the independent four jaw chuck.

@scuffieduffie 5 лет назад

I dont hope they are made this way in that machine.@@michael-michaelmotorcycle

@scuffieduffie 5 лет назад

Oldest trick in the book.

@letzego4649 6 лет назад

Could you make a workshoptour, to give us the possibility to see all of your awesome selfmade "machines" at once ? (Like if you agree folks^^)

@markfryer9880 6 лет назад

Here is proof that if you have a metal lathe you can make the rest of the tools needed for your workshop. I am pretty certain that who ever came up with that saying never anticipated the efforts of Make It Extreme.Not in their wildest dreams.We regular Subscribers know better.Make It Extreme never does things by half measure.

@zumbazumba1 6 лет назад

And if you have milling machine and lathe you can fly to the mars.

@jeetenzhurlollz8387 5 лет назад

There is a theory that says that world war 2 was triggerred mostly becasue of tools like lathes and milling machines.Industrialisation became too easy suddenly.

@Ritalie 4 года назад

This is amazing. Yes a Lathe and Milling Machine are needed to exist on Earth. Otherwise you are stuck buying everything new for millions of dollars. Unfortunately a good lathe cost several billion dollars, and millions of dollars to have it shipped to your house. A milling machine is about 1 trillion dollars. Then you gotta have a shop, which costs another 10 trillion dollars.

@justingould2020 6 лет назад

That trick with the shim in the lathe was really neat!

@AlekseyCamodelkin 6 лет назад

This is a serious channel for self-made works. The author of the video is special with a capital letter.

@MakeitExtreme 6 лет назад

Thank you very much! :)

@michael-michaelmotorcycle 6 лет назад

The equipment I run at work has a lot of eccentric shafts used for adjusting pressures between rollers, printing plates & blankets. I’ve always wondered how those shafts were made. Now I know.

@grayem76 6 лет назад

always have me guessing till about halfway through then it makes sense another great project well done

@rogeliomarquez7918 6 лет назад

Man, every time I end up seeing one of your videos I feel the need to wake up and make something in the shop. Congrats, another great project !!

@chadstone1973 5 лет назад

If you’re gonna make something, make it extreme or don’t make it at all! Awesome tumbler and video!

@RAdams 6 лет назад

Thumbs up for Never Boring

@CheeseToastOfDeath 6 лет назад

Huh. When I saw the thumbnail, my first thought was that you were going to use this machine to automate screening the ball mill's output, but this is probably more important. As usual for your creations, this thing looks pretty well engineered and a tad overkill, both of which are why I follow you guys.

@courtneycarter575 6 лет назад

I like the way you keep your workspace clean. I cannot Stand a disheveled shop. Love the video. Looking at my new 3lb tumbler in tears...

@thereplicant8220 6 лет назад

Yet another awesome build vid keep up the good work guys best youtubers for fabrication out there

@MakeitExtreme 6 лет назад

Thank you! :)

@dragosdesign4563 6 лет назад

behind every great youtuber, there's a great cat :)

@samc5898 6 лет назад

Next step is to add a solvent sprayer under the lid to help clean and keep that dust down

@donaldasayers 6 лет назад

Amazing what you can do with a £10000 lathe, a £2000 press and a top end mig welder.

@scuffieduffie 5 лет назад

You can't buy skills.

@WAP295 6 лет назад

Always an hypnotic entertainment to watch. What a maestria of skills and ideas. Thank you. Efcharisto ! ... 54 days until returning to Paphos for the 10th time. Can't wait.

@eloyworkshop541 6 лет назад

Amazing, very good work, no doubt you are my step to follow, a big hug and greetings from Spain.

@dannys69 6 лет назад

When your mom asks what your doing in room you just say using "im using the vibratory tumbler!"

@marso6818 6 лет назад

A tour of the workshop presenting all of your creations would be nice!

@Mikefence 6 лет назад

Easily the best of RU-vid 🤴

@vigilante004 6 лет назад

F'ing AWESOME!!! As usual. Thanks for sharing.

@MarionMakarewicz 6 лет назад

Absolutely stunning! You all are just the best inspiration to go out and make things!

@quentinfriant5614 6 лет назад

It would be interesting to use your own roller bender. Great and useful project !

@dariorodriguez7157 6 лет назад

Every day better and better...!!! Great Make it Extreme. From Argentina.

@MinhasA 6 лет назад

i learn so much watching your videos! i always look forward to the videos... thank you!

@XXCoder 6 лет назад

Amazing video. What I hate, however, is flashing effect. it gives me instant headache which means it could be seizure danger for people more sensitive to it.

@matthewlorfeld5412 6 лет назад

Why didnt you use your own metal tube bender? It would have been cool to see you use tools you already made to make other tools. Love your stuff.

@metalmogul4691 6 лет назад

You are making many peoples dreams.

@andypcguy1 6 лет назад

Everything you make is fantastic. My favorite RU-vid channel. If you get feeling really ambitious please make a twin blade saw mill. Look at turbomill or Lucas mill. I would buy the plans. Cheers. Keep up the good work you're awesome.

@jonathanweis557 4 года назад

Love you guys ! You do a lot of great welding using many different methods. I know your style is silent but I would love to hear you guys talk about your welding knowledge and how you make it look so easy, what equipment you use, technique etc. Thanks Again !!

@khawarsabir8212 6 лет назад

God bless you I can pray for u can send more interesting videos

@JimmysTractor 6 лет назад

6:06 Noooooooo! One side at a time one axis needs to be fixed. Got lucky not splitting the bottom with that crooked press.

@CoolKoon 6 лет назад

Yeah, I was cringing when I saw that too. He was REALLY lucky....

@CoolKoon 6 лет назад

Chris Russell Well, the reason he gets away with it most of the time is because the thickness of the materials he uses usually allows him to afford quite a large margin of error I think.

@Smurphenstein 5 лет назад

@Chris Russell I was thinking something similar. Too many expensive machines for the novice along with no real explanations of why or how but the professionals will see a better way to do it so really no good for either. Then the music fit only for a transformers fight scene really annoyed me too.

@thegoodearth7 5 лет назад

@Chris Russell Knit-picking along these lines (non-verifiable statements) is not very becoming for such a self-proclaimed engineer like yourself. Please put the url for us to actually see what you do . . . that is the appropriate follow-up for people who like to call an obviously gifted fabricator out. Unless it is actually something else . . . like jealousy . . . that is actually the engine driving your statements. In that case, why not just be honest about it rather than laundering your insecurity through a mountain of theoretical quality control diatribe.

@v8trauma 5 лет назад

@Chris Russell well I have seen them close up and as you say, a tyre is the way to go. Conveyor belting works well too. Lots of people love this chanel and get upset when it's pointed out that the stuff demonstrated is sub parr. Basically they feel upset that they're not bright enough to see this tat for what it is and don't much care for the anyone who points it out. I particularly like the comments about showing your own video to prove well known facts. In my case, I'm too busy doing stuff based on sound engineering principles to bother posting a video about it, I suspect you're in the same boat.

@38911bytefree 6 лет назад

Stunning work. this is ART.

@SamfaidaMeRECREATOR 6 лет назад

🇮🇹🇮🇹🇮🇹Sempre grandi progetti, complimenti.. Anche se per noi umili Makers... Troppo Professionale. 🇮🇹🇮🇹🇮🇹

@jerrygonzalez6643 6 лет назад

Extremely satisfying videos to watch! I’m curious to know what your work shop looks like.

@ThisTall 6 лет назад

As a wood worker, machine work and lathes especially just baffle me. take one look at how hard that center nut wobbles @3:05 and yet i know it will all work out nice and true.

@markfryer9880 6 лет назад

Kermit Strange, it's just working with a different material and some slightly different techniques.

@maltesefireworks 6 лет назад

First video on how actually you can do this machine at home ! Keep it up

@maltesefireworks 6 лет назад

You should do a video on how to make a normal ball mill 😊

@MentalCatalyst 6 лет назад

maltesefireworks ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UaTESilqsJw.html

@alonzosanchez8577 6 лет назад

Incredible!! Really Always Something Amazing Being Built 👍👍👍

@henrymonroy9533 6 лет назад

Your skills never cease to amaze

@robsdeviceunknown 6 лет назад

I love making things like you do. My problem is, I absolutely suck at coming up with the ideas. I do better at modding existing items.

@zanpekosak2383 6 лет назад

Rob Lambert Yeah same here.

@markfryer9880 6 лет назад

Rob Lambert Nothing wrong with that skill set. Don't be so hard on yourself, too many people these days just buy off the shelf or pay someone else to do the whole damn job and not lift a finger

@BrianB.-lb8du 5 лет назад

@Rob Lambert...Same here, pal. And @Mark Fryer....excellent point, and quite encouraging at the same time, too. Kudos to both you gents!

@hubert3344 6 лет назад

comme toujours très bel ouvrage Merci pour cette belle vidéo. Salut amical de Paris

@tiredhero 6 лет назад

I would love to work in a place like that.. obviously to be taught...

@jon4x4 6 лет назад

You are my ultimate Superhero 😘👍🏼

@Hias467 6 лет назад

Good vibes me tooo😏😂

@hsarmh100 6 лет назад

You are the best 💐❤️

@magnitolavsem9842 6 лет назад

Мужик ты мастер на все руки !!! Пишу по русски не обижайся , но тем самым хочу сказать что мастерство не имеет языковых барьеров !!! Надеюсь ты поймешь что написано)) Завидую твоем мастерской !!!

@dfapetrie 6 лет назад

I just signed up for a welding class. I'm pretty sure I'm going to burn my fingers off. I hope you can live with yourself.

@DeepRafterGaming 6 лет назад

That design is quiet clever, nice work...

@ageofmau 6 лет назад

Make it extreme video: I "like" it right before watching the video... amazing guys

@Aleksandr_Eni 5 лет назад

Это дело! Вибрационная машина для очистки поверхности деталей - нужная вещь в ремонтной мастерской!

@isaisa8417 6 лет назад

Oh, yeah. New video. 👍

@markbero2357 5 лет назад

Good day! Im a student and really inspired about your inventions. Can i ask something if that is okay with you. Do you have calculations before you do this machine?

@rpinarreta 5 лет назад

Great Job!! Now to rent this out or local service and recoup some $$. Seems like anyone could use a tumbler to clean up some old parts.

@deankay4434 4 года назад

I think that is exactly the same one sold as the “Binford 6100” series with more power. You may want to check with “Tim” the tool man Taylor for patent rights. I don’t want you in trouble. Lol. Nice job!

@pyscho919 6 лет назад

I have a project for you to try, how about turning a lawnmower into a floor buffer? Doesn’t seem too hard.

@giannirocco9099 4 года назад

I been using an old concrete mixer with pretty good results!

@user-zg5ko9ym7f 6 лет назад

I am looking forward for the chicken plunker!

@jeremymadden7021 6 лет назад

You have to keep making these badass videos! 👌🏻

@josepherwin8709 6 лет назад

Brilliant piece of work! I’ve got a couple of small tumblers for cleaning small pieces, but that thing could almost eliminate my need for a media-blaster. Sweet work! Love the music.

@domenicoscopelliti163 6 лет назад

Great job , great idea! Respect from italy

@MCsCreations 6 лет назад

Amazing work! :D And beautiful cat!

@MakeitExtreme 6 лет назад

Thanks! :)

@marcellomagagna3018 2 года назад

I NEED ONE LIKE THAT! WONDERFUL JOB!

@Mikhandmaker 6 лет назад

WONDERFUL!!

@Vatsek 6 лет назад

Very good.

@watahyahknow 6 лет назад

that one is a verry nice build , hope youre able to get more of those plastic bottles as they do wear out over time the machine might work even better if you add some water and maibe some washing machine type soap (doesnt foam) , it degreases the metal trown in and keeps the dust down , if you spray in water over the top and have a point in the bottom to drain it out it might work even better as it flushes out the fine particles , i seen machines like these give metal a polished look , i think that depends on the medium trown in there

@arjunaamrubitaqwa214 6 лет назад

U are... Best inspiration...

@SpatialGuy77 5 лет назад

Hey guys, I'm one of your many $10 Patreon supporters - for last 18 months so - FYI, little correction, check spelling on the plans for this one - also, are the plans available as CAD files for Fusion 3D - cheers, fcking awesome stuff you guys do. Would love to see some more practical tools/machinery 'Make Its' - Cheers again -M

@bucksmith9035 6 лет назад

holy crap wish i had a warehouse and all the equipment to go with it

@parisgk 6 лет назад

μπραβο φιλε μου δεν εχω λογια εισαι πραγματικα τελειος πολυ καλη δουλεια !!!!!

@DonQuichotteLiberia 6 лет назад

Once again a pleasantly extreme build!

@dsldrvr69 4 года назад

man you are a genius

@VeradonaRestoration 6 лет назад

Good job !

@ALHAMMADI1988 6 лет назад

Hello my friend✋🏽 I would like to buy such a device , But when I saw you make one better than the stores , I said to myself, Why do not I make one like him? And know what secret that made you a professional as usual in the manufacture of things (it is the cat that appeared in the video) Haha 🤣 The music in the video made me feel excited and I want to make one like this machine, but I know you are the best in everything Thank you But you are the best . Your little brother: Muhammad ☺️

@tech270154 6 лет назад

one word = wow thanks

@The_Joker_ 6 лет назад

My Wife’s sister would love one......Especially the vibratory part 😂

@nomisgamer2236 6 лет назад

insane you should try to make a homemade power hammer this could be really cool

@NRK1988 5 лет назад

I love how they all have a number like its there name and yet its a build number like r2d2

@mac63126 6 лет назад

What is the ring roller you were using?

@3aloshshi7a96 6 лет назад

Can you make a cnc ?

@kassiman5307 6 лет назад

THATS GREAT .... AWESOME VIDEO....! thanks

@DeviantWays 3 года назад

Ok that’s just badass, the whole build absolute talent to create and awesome machine. Kudos, Mad Respect! Shabbat Shalom

@andyd2960 6 лет назад

Why did you paint the inside?

@langhilau 6 лет назад

When you are inserting the bearings into the hubs like you did on this video, how much smaller is the hub than the bearing itself?

@asakayosapro 2 года назад

I would think that in particular, it would be a press fit, which would be having both parts have the exact same measurement or even a few thousandths of an inch of extra just to keep the parts together via compression. There's various ways to put together parts like these.. you have slip fit, press fit, and shrink fit, with the latter two having zero clearance between the mating parts, but the latter using thermal expansion to allow the parts to either be slip or press fitted, and once the temperature expansion is gone, the two parts are fitted so tightly that they might as well have been welded, unless the part breaks from excessive compression stress.

@ch3no2freak 6 лет назад

Have you thought of making a long travel radial arm saw that use a circular saw that you can detach?

@denciochannel4643 6 лет назад

Sir can you make a wing turbine. Thank you

@lagosfe 6 лет назад

Γειά σας ρε μαστορες! Είσαστε τελειοι!

@froop2393 6 лет назад

The bending machine is not green... Why do use not your previous self build one?

@georgf9279 6 лет назад

Pressing in the two bearings at once was a bit sketchy. But other than that: beautiful build as always.

@steveobee3488 6 лет назад

Do you guys have a parts list and prints so i can build one that size

@eduki 5 лет назад

Can I ask you what's the electric engine to make it work? It's an excellent job, subscribed!

@cato4649 6 лет назад

Can you please made a electrolyse bath?

@therealdeadpen 6 лет назад

I'm going to have to look and see if you have made a *Extreme Sandblaster Cabinet* yet. Like how you have this 80's montage to building BUT with the actual build and NOT a bunch of nothing then the machine magically appears.