Project Bumble Build - The Shocking Truth about Building a Grand Cherokee - Pt4

Подписаться 563 тыс.

Просмотров 77 тыс.

50% 1

The Jeep WJ build continues as we get the shock hoops and frenched barnes shock towers mocked up. Buying from Barnes? Use coupon code "bleepinjeep" at checkout for 10% OFF. Find our other coupon codes here: bleepinjeep.com/member-discou...
*********************************
WJ Build Videos:
Ep1: • You've been waiting fo...
Ep2: • How-To Build the ULTIM...
Ep3: • Project Bumble Build w...
*Ep4: • Project Bumble Build -...
Ep5: • The Internet Says I'm ...
Ep6: • This is HARDER Than I ...
Ep7: • Not Done but we're gon...
Ep8: • Will Project Bumble Ne...
Ep9: • Cliffhanging in Moab W...
Ep10: • Showdown: Bronco vs Je...
Ep11: • Mistakes Revealed: The...
Ep12: • We Bet You Have NEVER ...
Ep13: • Instant Regret: Abando...
Ep14: • Jeep WJ From MILD To W...
Ep15: • Jeep WJ Crazy Roll Cag...
Ep16: • The Paint is still WET...
The WJ Playlist: • Jeep WJ - Project Bumble
*********************************
Get 20% OFF ONX GPS Maps: Enter code “bleepinjeep20” at checkout
Get 15% OFF Adam's Driveshafts: Enter Code "BLEEP15" at checkout
Get 10% OFF Barnes 4WD: Enter Code "bleepinjeep" at checkout
Get 10% OFF Iron Rock Off Road: Enter Code "bleepinjeep" at checkout
Get 10% OFF Bullet Point Mounting Solutions: Enter Code "bleepinjeep" at checkout
Get a Free Pre-Filter for Thor Cowl Intake: Enter Code "BLEEPINJEEP" at checkout
See all BleepinJeep Discount Codes at: bleepinjeep.com/member-discou...
*********************************
If a BleepinJeep video has ever helped you consider returning the favor by:
• Supporting us on Patreon here: / bleepinjeep
• Becoming a Member here on RU-vid: bit.ly/2wGeSec
• See what we recommend on Amazon here: amzn.to/2kc6Syn
• Buying a T-Shirt Here: www.bleepinjeep.com/store
• Or Just leaving a kind comment on FB here: / bleepinjeep
*********************************
This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee XJ, wrangler TJ, wrangler JK, or any Jeep vehicle, especially the newer Fiat ones. How-to videos may be too intense for some viewers and children under 30 years of age. Please remain seated until the 4x4 ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in Bleepinjeep mirrors may be farther than they appear.

Авто/Мото

Опубликовано:

25 мар 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 120

@novax4me Год назад

Matt, your wife is an amazing person. I was privileged to meet your entire crew at the S.M.J.E. in 2022. Your wife stole the show, IMHO. She is like the other Matt's wife, Jaymie. Both beautiful on the outside, but their souls are absolutely amazing! Love her every day for the rest of your life, brother. I'm pretty sure that she's going to love you for the rest of hers... Blessings on all of you and 'Hey' to the Big Guy! 💛

@gammaboxer9765 Год назад

Hearing Tim's name being mentioned made me wonder if Matt will ever do a "where are they now?" video of all the long lost BleepinJeepers? So happy seeing these build videos. Cheers.

@shark180 Год назад

I heard that Tim, Tyler, and Jeremy joined the French Foreign Legion.

@twodogsyyc6729 Год назад

I luv this build. Stance and ride height with those tires looks so good!!.

@bleepinjeep Год назад

Thanks 👍

@123chupadero Год назад

I will never built a crawler like y'll, but I love watching y'll.

@bleepinjeep Год назад

keep watching and maybe itll get you in the right mind set to build one!

@DoctorHayduke Год назад

Video game music during welding time lapse for the win. I bet no one has ever typed that sentence before.

@matthewzoelle9149 Год назад

Haha it cracked me up seeing someone use my hammer on the Dooley wheels trick.

@mclarenscca Год назад

Can't wait to see it crawling! ❤

@fishing_with_chaz Год назад

Your wife is so sweet. Your guys setup in the shop is awesome you make it look so easy makes me wanna do some of the stuff you're doing like suspension building. I'm thinking of leaving mine a little more stock than yours but I enjoy your videos so much

@bleepinjeep Год назад

Thanks 👍

@richardnichols1532 Год назад

YEESSSS, the wj!❤😂

@johnbennett2748 Год назад

You need a nice high vis paint job on your dust pan. Black is pretty much garage camouflage. 😁

@bleepinjeep Год назад

thats a good idear!

@ezmac622 Год назад

Sweet baby rays!

@soulis1000 Год назад

You get a thumbs up just becouse of Hope, she is adorable. :) + it was a good video ofcourse.

@javman03 Год назад

"Cuz I love you, Stop looking at me!" 😂😅

@lowemountainadventures Год назад

man watching these videos really makes me want to get another WJ and build it bigger and bader then my last one.

@joshuazientara4452 Год назад

Thanks for sharing!

@bleepinjeep Год назад

Thanks for watching!

@albertdehn8381 Год назад

Thanks for sharing 👍😀

@TrailTime. Год назад

Just bumped into you guys at O’Reillys in Moab, the WJ looks sick! Let’s see some Moab stuff. I finally had to pull cable yesterday for the first time in three days here, this place is not easy in a short two door jk on 39’s

@apache6167 Год назад

If you are ever in Sacramento California, you must try Roxie's deli and BBQ!!!

@bleepinjeep Год назад

do they have the pepperonchinis?

@apache6167 Год назад

@@bleepinjeep in every bite!

@muddiver91 Год назад

Love this build ! Great channel ,thank you for all your hard work !

@bleepinjeep Год назад

Glad you enjoy it!

@joecallicott21 Год назад

Can't wait to see you at Easter Jeep Safari! Love your channel! Keep an eye out for the "Vanilla Gorilla" XJ on the trails

@rotoregonian6857 Год назад

You guys better move that lower shock mount or you'll never get the ball joint remover over that flange

@bleepinjeep Год назад

nah, thats like saying we cant remove an engine with a bar welded over the top of it.

@DarKMatter.1 Год назад

@@bleepinjeep that’s why they made a cutting torch. lol

@rowlinstoned3715 Год назад

I've seen @bleepinJeeps ball joint remover. It's of the 3 pound variety 😂

@Beebop-ow9ge Год назад

They aren’t going to let fear and common sense stop them

@danielaguirre8773 Год назад

They will probably just weld the ball joints solid 😂

@bobtucker8875 Год назад

Nice work on the WJ. Great content guys ☺️. Keep up the great work.

@thephilosopher13 Год назад

I can verify, brisket, bbq, onion and peperoncini makes for a real brisket bbq. Also, it’s 8:30 AM and I am on my way to Walmart for a brisket after this video. My stomach just bottomed out and did the big growl. Also, if you ever have the opportunity, a brisket wrapped in aluminum foil with spices, a bit of peperoncini juice and onion, slow cooked over the coals of a fire in the woods whilst on a camping trip, it will be the best brisket you will ever eat…. That’s a fine run-on sentence right there.

@bleepinjeep Год назад

mmmm, sounds delish!

@stevemiller3082 Год назад

I’ve stumbled across you on the other’s posts. This was my first video of yours. First impressions: Your wife is super! Absolutely love the shop From catching you on other videos, I’ve grown to appreciate the way you explain what and why on your tasks. Eating those sit down lunches was never allowed by my father- he would down a bowl of boiling soup in under a minute and then- back to it. I grew up in a shop where we built custom vehicles as well as the daily grind of a local garage. I can appreciate some of the trials and tribulations that y’all experience. Looking forward to seeing what happens in the future.

@bleepinjeep Год назад

a good lunch and good lady is the key to a builds success!

@destnations5588 Год назад

You got my like as soon as you described what is a proper pepperochini, that it has to blast everywhere as you bite. That's proper on the ground food info and I love it, great channel buddy, I'm an avid fan and keen subscriber. I will start building all my custom suspension soon for my channel :)

@bleepinjeep Год назад

Right on! has to burst all over!

@michaelbradshaw2069 Год назад

Jeeps, Dr Pepper and Brisket = Best Day Ever!!

@rickcronin9357 11 месяцев назад

I keep thinking someones backing up a truck while watching this build at my house and it's just the construction going on at your place 😂😅😂

@ryankurtz4096 Год назад

Looking good. Josh I have to say I am a little jealous. Can't wait to see you wheel it.

@brackoncorbridge1966 Год назад

Best wife and best delivery plate/basket.

@theezeelife292 10 месяцев назад

Come on over to Texas and we'll show ya how to eat a brisket. Lol. That looked really good, Matt.

@OffRoadOverlandCamping Год назад

Matt, good meeting you on Hell Revenge Thursday! I was with GenRight in the firecracker red JL Rubicon. Talked to you once at Devil's Hot Tub then at the Escalator.

@MidnightMadness4x4 11 месяцев назад

i know plenty about airbags going off thanks to Tuff Trucks. Not first hand though thank god. I've seen my fair share of them going off on other competitors...including one I was racing against.

@deadgameguns Год назад

love me some xj zj builds! hope to see them in the wild at some point.

@bleepinjeep Год назад

come on out to EJS next week!

@StormbornJKU Год назад

That lower shock mount is super close to the ball joint. You’ll never be able to press that ball joint out. The WJ is looking cool though. It’s actually pretty badass with how much of the rear you guys have cutout. I imagine your going to box it all back in and seal things up. Pretty cool build I look forward to more of it!

@bleepinjeep Год назад

yep way more to come!

@johnnychaffin307 Год назад

it seems like the more tool boxes I buy, the harder it is to find stuff!

@slowcountryboy476 Год назад

Geeze lueez kid, a professional roof cuter can make that shock tower work beyond your newbie dreams!!

@MrW5909 Год назад

I just showed up to this channel and thought I was about to see a WJ build... Nah, this is a DOUBLE YUUUU JAAAAAYYY BUILD! Holycrap guys! Calm down! LoL Friggen sweet though! Next yall should do a WK because people that couldn't get their hands on a super lift missed out and some people wanna swap em to SA.

@DrHavok1 Год назад

lovin it matt and josh

@beauxjones8793 Год назад

“How to eat brisket”‼️‼️‼️ Grumbled in TEXAN so you probably couldn’t understand me anyway.

@garychaiken808 Год назад

Good job guys. 😊

@edwardsimmons3721 Год назад

Great fabrication. I think it will be a rough job if you have to replace the ball joint covered by the shock mount.

@slowfox89 Год назад

Piss on bumble...how bout that brisket! Whew she hooked yall up. Very good looking meal.

@NajarOffroad Год назад

Loving the build🔥

@beerdrinker6452 Год назад

You guys like to work hard. Nice video.

@AdamDaughterson Год назад

Loving the chip-tune songs

@Skiridr22 Год назад

You need a Badlands off-road jack

@robd.4319 Год назад

Matt I really enjoy watching your videos. Maybe someday I will be able to meet you guys in person.

@bleepinjeep Год назад

come on out to one of our events some time!

@flyingmachinecustomparts8227 Год назад

Lots of great fab content..I love it . Good video guys

@bleepinjeep Год назад

Glad you enjoyed it

@djkincaid Год назад

This build can not be as easy as you're making it look. "I'll just make a cardboard template of the computer mount." That would me all day. Can't wait for the next episode.

@vickiware813 Год назад

Perfect way to eat brisket! 😋

@psg6314 Год назад

I see some bent shocks in the future and great video keep up the good work God bless from GA and stay safe

@bleepinjeep Год назад

why is that?

@psg6314 Год назад

@@bleepinjeep it looks like the pivot angle off and the tires look like they will hit

@donaldhalls2189 Год назад

I'm just curious about how much are these Barns kits, and 4 links? like the most I've paid for a vehicle is $6 grand ,😢 but the build is coming along great, thanks for sharing, all the best to yous and your loved ones

@Blindbat1337 Год назад

Ya'll making me want brisket at 8:30am...

@gonzalez7805 Год назад

Nice

@jeff750r Год назад

@4:35 how are ya going to remove the upper ball joints? I would have assumed you'd opt for the deletes with the axle out?

@jimkennedy9200 Год назад

At 3:59, won't that lower shock mount make it real hard to get that ball joint out?

@mrmongo6722 Год назад

I here you on the toolbox 25 years ago when we had a shop I just purchased a $45 cart and almost every tool I needed was in that cheap little cart?

@jeepdoctv Год назад

That’s going to be a beast! And now I want BBQ 😁

@huntersharpton6675 Год назад

Josh how did you delete or move your evap system from the rear driver side?? I’ve been trying to find someone who can tell me how to get it out of the way!

@larryshelton9335 Год назад

I just bought a 1995 Grand Cherokee ZJ. 5.2 Full time 4wd. I'm installing a 4" lift and want to run 33's. Will the full time 4wd be ok for the trails or should I spend the money to convert? Any advice is welcome.

@Bryan-or9hc Год назад

What brand Coilovers are you running

@wbball15 Год назад

Matt "Not the right angle" Bleepinjeep

@rlfdavin Год назад

the tube that goes over the engine to reinforce the shock towers in front are you going to make it removable with those inserts ive seen that allow the tube to come out? Incase you need to pull the engine?

@bleepinjeep Год назад

I mention this in the next video so you'll have to check it out then!

@rcallaway6525 Год назад

Are you available for a visit this morning

@fishing_with_chaz Год назад

Your videos really make me wanna buy a plasma torch maybe one day I will haven't decided

@bleepinjeep Год назад

its a must, you'll wonder why you didnt have one sooner!

@fishing_with_chaz Год назад

Have you guys tried rocking a plasma from harbor freight of so any thoughts on them? You guys really make great videos love all the content

@casperme6552 Год назад

You need to swap that cheap tool tote for a Veto👍

@NittyGrittyOffroad Год назад

We really need to come work in y’all’s shop if that’s how lunch is served!!! Fantastic 🤌🏼

@fishing_with_chaz Год назад

Did u guys buy the wrench organizers from harbor freight? Those look awesome

@bleepinjeep Год назад

Some are from Tekton, some from HF

@fishing_with_chaz Год назад

The ones u have that are bolted to the top of your shiny new orange toolbox are from where? I'd really like to buy some like that

@RyanPalmerRegeneratetreatment Год назад

What do you think of ORI struts?

@bleepinjeep Год назад

I like em, I run them on my scorpion crawler

@thehouseman81 Год назад

Are you able to replace the upper ball joint in the future with that lower mount on the axle?

@rotoregonian6857 Год назад

No they won't I was getting ready to comment on that. The tool won't fit over the upper flange

@thehouseman81 Год назад

@Rotoregonian68 lol I knew that I was just trying to be polite and kinda let them figure that out. All good brother

@bleepinjeep Год назад

everything is replaceable, removable, or meltable!

@thehouseman81 Год назад

@@bleepinjeep can't be stuck if it's liquid

@DoctorHayduke Год назад

I mean, Ford made you drop the rack and pinion steering as well as the bell housing support member just to change the starter on a Pinto. It seems that a plasma cutter and a welder should do just fine for any future maintenance on the Jeep😆

@slowcountryboy476 Год назад

Hey, no invite grub, what the hang??!!

@aldonunderwood930 Год назад

If Josh still has the Dana 30 I’ll come pick it up I’m not to far from y’all.

@bennyricker5487 Год назад

You guys are great . Mat you have a wonderful wife

@runninonempty820 Год назад

Man, I was wondering why my foot felt so weird inside my shoe. I forgot to put my sock on..........again.

@patokun8252 3 месяца назад

You have good woman congrats🎉🎉

@slowcountryboy476 Год назад

Hey, whoa, how the hang can you afford the parts that go into all those projects?? How can a Veteran a on small va compensation afford all you do?? WTF!!