Project Drag Slash | Custom Build

Подписаться 85 тыс.

Просмотров 411 тыс.

50% 1

Learn More: www.traxxas.com/news/custom-dr...
Model/Parts Used:
Slash VXL w/On-Board Audio
www.traxxas.com/products/model...
or
www.traxxas.com/products/model...
Funny Car Wheels/Tires (rear)
www.traxxas.com/products/parts...
Front Wheels
www.traxxas.com/products/parts...
Stub Axles (rear)
www.traxxas.com/products/parts...
Tires, street slicks (front)
www.traxxas.com/products/parts...
Suspension arms (front)
www.traxxas.com/products/parts...
Suspension arms (rear)
www.traxxas.com/products/parts...
Bandit Camber Links
www.traxxas.com/products/parts...
Bandit Half-shaft axles
www.traxxas.com/products/parts...
Turnbuckles, toe-links
www.traxxas.com/products/parts...
Front bumper
www.traxxas.com/products/parts...
Wheelie bar assembly
www.traxxas.com/products/parts...
Button-head screws (3x20mm)
www.traxxas.com/products/parts...
Shock Rebuild Kit
www.traxxas.com/products/parts...
Front Axles
www.traxxas.com/products/parts...
Suspension Pin Set
www.traxxas.com/products/parts...
Button-head screws (3x25mm)
www.traxxas.com/products/parts...
Lock nuts (3mm)
www.traxxas.com/products/parts...
Double-sided adhesive (for OBA sound module)
www.traxxas.com/products/parts...
Blue Aluminum Wheels for Wheelie Bar
www.traxxas.com/products/parts...
Shoulder screws
www.traxxas.com/products/parts...
Aftermarket Parts:
14mm Wheel Hexes (needed if using #6968 Funny Car wheels)
Compatible RC body:
parmapse.shptron.com/p/68-musc...
parmapse.shptron.com/p/69-r-t-...
parmapse.shptron.com/p/65-musc...
Magnetic Body Mounting Kit
www.prolineracing.com/accessor...
Tools Used:
-1.5mm, 2mm, & 2.5mm hex tools
- 5.5mm & 7mm nut drivers
- Needle nose pliers
- Hobby knife
- Electric drill
- 2mm, 2.5mm, & 1/8in drill bits
- Body reamer
- RC body paint
- RC tire glue
- All-purpose cleaner
-4mm wrench
- Small flathead screwdriver
- Side cutters
- RC body scissors (curved & straight)
- U-joint wrench
- Sheet of paper (for painting)
- Permanent marker (to mark position for OBA speakers)
- Table vise
- Dremel tool with cutting disk and sanding drum
- Microfiber cloth
- Safety glasses
Wear proper safety goggles and use caution when working with rotary tools or general hobby tools. This project build should only be performed with the supervision of a responsible and knowledgeable adult.

Опубликовано:

15 май 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 379

@xoibor 2 года назад

I like how traxxas creates whole new classes and they don’t stick on for a while then just take off out of nowhere

@rileyalexander9715 5 лет назад

This should be something that is ready to buy

@Alanc419 5 лет назад

It would probably retail at $799.99

@rattlehead7281 5 лет назад

@@Alanc419 more like 400

@shonuff420 5 лет назад

YESSS I WANT AND WAS GONNA BUY THE DRAGSTER(BUT THISSS IS SOOOOOO MUCH NICER AND COOLER TO ME

@Salty_reviews 4 года назад

I'd buy but not for more than a standard slash

@andrewerickson6690 4 года назад

Why? It's more special when you build it yourself in my opinion

@caelfentress2681 5 лет назад

The determination to use only Traxxas parts is impressive.

@erikm2003 4 года назад

Yup they coulda just used rpm wide front a arms.

@RCTrend 3 года назад

@@erikm2003 facts. And they used proline bodies but never said their name

@rattlehead7281 3 года назад

@@RCTrend that's not proline its Parma

@rattlehead7281 3 года назад

@@RCTrend and they have the link to the bodies in the description

@thetoxmedia4807 3 года назад

and pricy

@joellofquist2537 5 лет назад

Still waiting on this off road xo-1!!!!!!!

@cookiemonster788 5 лет назад

joel lofquist we neeeeeed one

@Azaelyyandel 5 лет назад

Blahahahaha 🤣🤦‍♂️

@Bungarungagungaboo 5 лет назад

What about Bandit 4x4?

@joellofquist2537 5 лет назад

Supercharged Sidness they had a pole a wile back to see what people wanted to see built an off-road xo-1 was one of the choices and I believe it won but they never ended up doing it they did this one and a 100mph slash but no off road xo-1 I’m just going to build my own with all my spares I’ve been pulling off my slash and xo

@fcsthememe7987 4 года назад

Yup

@Ssh52 5 лет назад

*Its called the Slagster...* Seriously?

@killaz123456789100 5 лет назад

#runningoutofshittodo

@skidsftw8074 4 года назад

Cheesy trxxas names

@ManuelOrtizification 4 года назад

Apparently slag racing is a thing now 😂😂😂

@deeredude 5 лет назад

I Like videos like this. I love swapping traxxas parts and creating new cool rc traxxas vehicles.

@officialclownbusiness7788 5 лет назад

PLAYERS FIRST I agree. I am making a 2wd Slash/Stampede/Bandit mix currently myself. It's beginning to look a little bit like Mad Max.

@DB-qm4jx 4 года назад

No you dont

@newspaper199 3 года назад

Dan Brando ?

@exotikinc3397 5 лет назад

This should be a buyable product!

@davidpayne4315 4 года назад

I'd grab this baby in a minute

@soonergaming4747 4 года назад

Ever heard of the funny car it’s similar

@quabiloyoink 3 года назад

Sooner Gaming *No*

@newspaper199 3 года назад

Quabilo Yoink no?

@quabiloyoink 3 года назад

*no*

@AndreHarrod 5 лет назад

Traxxas Please create a drag Pro-Street or Pro-Mod OEM version!!!!!

@kevenlastname3324 4 года назад

I built my slash Dragster from a brushed LCG 4wd model. I locked up the front diff and used the shaft and a servo as my line lock. It works pretty good .... For what it is. It also allowed me to displace the weight of the vehicle better.

@paulclancy2404 4 года назад

How does lock front wheels ?

@RNCFabrication 5 лет назад

I love that it uses jato arms. I have been using those for long travel on my slash for a while. Should do a video of that for people.

@jesseheller4115 5 лет назад

Now I want another slash just to do this! This is so cool! I love how versatile these trucks are!!❤️😃😃

@user-ic4pu2fe1j 5 лет назад

next xo-1 to rallycar

@shancyroesner9212 5 лет назад

😍😍😍 I want that charger body for my slash 4x4 😎😎😎

@dallasevans2508 5 лет назад

Damn mass production these and sell them!

@WillieBeard 3 года назад

They do. It's called the Team Associated DR10.

@skeetermcswagger0U812 3 года назад

@@WillieBeard LOL!!!!

@meademorgan6614 3 года назад

What so you think, the new Drag Slash is?

@meademorgan6614 3 года назад

@@WillieBeard The Drag Slash will smoke a DR-10, right out the box. I know, I have one.

@drjavogel 5 лет назад

Traxxas vehicles are so versatile! Now I want to make a Slashster. Great step-by-step video. Thanks.

@boerharms2209 5 лет назад

The traxxas slash is the true master of all RC cars.. it can do everything

@msdos32 5 лет назад

I've found the slash to be one of the most versatile platforms in RC. Very easy to build just about whatever you want from it

@urineanimal 5 лет назад

Only versatile due to a similar psychological process of sexual repression traits driving people with 1 extra IQ point above average to moddify these weak platforms to come 1% closer to everything else that is way cheaper, far more durable and faster out the box. I really wonder.... what level of financial fraud the parent company engages in to keep from going bankrupt. Maybe not.... after all, the customer gets what they pay for lol.

@rattlehead7281 5 лет назад

@@urineanimal oh a traxxas hater

@urineanimal 5 лет назад

@@rattlehead7281 XO1 and Xmax are pretty much the only ones worth paying for. Everything else falls short and is inferior to other similar class of rc. And well, i can make one more exception for that nitro awd street car i forget the name with a 3.3cc or similar engine?

@rattlehead7281 5 лет назад

@@urineanimal some arent that good like the bandit but the design is quite old. The stampede alright. But in my opinion if your looking for an afordable basher id have to say the slash. Its a great basher with a few upgrades (shock caps) and can be fun for spec slash racing. I own a brushless slash 2wd and its good fun. May not be the greates track car but it is a decent basher. Also got a tmaxx and i love it. In the last bit are you referring to the nitro 4tec?

@JarcodeRover 5 лет назад

Can you guys do a Slash 4x4 to 1/10 UDR with the TRX4 rear axle :D :D :D

@estradamoto1 5 лет назад

Ooh now that's good thinkin 👍

@rivett40 5 лет назад

I bet that video would get a lot of views

@oceano3118 5 лет назад

would take a lot of fabrication. Nothing that would be reasonable and easy

@markfairhall3671 5 лет назад

The gear ratios will be different . Trx4 has portal axles

@JarcodeRover 5 лет назад

@@markfairhall3671 Hey, that's their problem ;D

@traxxasfanboy8959 3 года назад

Who's back after the release of the new drag slash

@STEVOD313 5 лет назад

Oh ya Drag Slash! Looks like a bunch of fun!

@AW-Luke 5 лет назад

You should make an off-road xo1

@LuisLPRCs 5 лет назад

This is so cool! You guys even posted all the parts needed for the build. Great Job! 👍👍👍👍👍👍👍👍👍👍👍

@visurc_videos 5 лет назад

Cool modification! And it is cool that you release this video how to build it 👍👍👍

@ExperienceRC 5 лет назад

Again, this is why you are the best company in the world of RC 🤟🏻👍🏻✌🏻💪🏻

@interwebs6415 5 лет назад

I have a nova body and the same Traxxas funny car slicks and skinny front wheels, bout to convert my 2wd slash thanks for the inspiration TRAXXAS, awesome video make more like this plz

@kylefulkerson3360 5 лет назад

I’d love to see a Desert Racer turned Nitro or a Nitro Slash turned into a Desert Racer style with the live axle and linked rear end!

@KreepyBeepy 5 лет назад

You guys here at traxxas are awesome

@gorillabeartech4577 5 лет назад

Awesome stuff traxxas I like this idea !!!!!!!.

@jackshort3316 5 лет назад

*Listening to quiet music so has sound up* Commentator “now reassemble the motor” *Me goes deaf*

@dallasdelano8235 5 лет назад

16:20

@cotes42 4 года назад

hahahah

@skeetermcswagger0U812 3 года назад

👉🥴👈

@Booster388 5 лет назад

Pretty cool that you guys are using our bodies in this video

@PIZZA_and_NITRO 4 года назад

Link that ! Nice bodies!!!

@dailydoseofstupidity6613 4 года назад

They should sell all the parts in a kit so you don't have to find everything and you can just buy it all at once.

@veselystojan2395 5 лет назад

wow looks so cool

@nwhuckin7761 5 лет назад

how bout some chrome front wheels to match the back

@Bayteee 5 лет назад

Can you do something like that with the slash 1/16 ?

@jdubbfam37 3 года назад

Made me wanna go play with my slash . I'm gone have fun guys great video

@TEAMCHONMAGE 4 года назад

Awesome cool RC 😎👍

@TheDeLeonGarageCollection 5 лет назад

You had me all the way up to drilling holes in the top of the body for the speaker mount. I would’ve gone with Velcro myself as well as Velcro for the body mounts for a more authentic look. It’s too bad there isn’t a way to narrow the front end for a more realistic drag work and getting rid of some of the negative camber on the front end would be ideal.

@photographermatt 3 года назад

This is an excellent video makes me want to build one 😎👍

@likwidvison 5 лет назад

What if you just start with a jato?? I was thinking of converting the jato to brushless

@natashawright9738 2 года назад

I got a question can you use 1/9 size goodyear 8 spoke on a 3s drag slash for rear tireso

@yarrokon 5 лет назад

Great video!

@timhull8226 Год назад

What parts do I need to build a drag car if I've already got the Traxxas low center-of-gravity

@haydnholder7090 4 года назад

Do u have to use jato front arms? Or would bandit ones or the ruslers fit?

@justin_ogre 6 месяцев назад

I did something like this years ago a rustler. Narrowed the track width with str4 arms if i remember correctly. I do remember that an hpi savage Cuda body fit perfect when I was done. All metal transmission, fiegao motor and a hacker esc. Kinda wish I had kept it that way.

@Bigdix77 4 года назад

What would be good to use to maintenance latrax Teton diff gears?

@nearlyheavenfarms2966 5 лет назад

My rwd slash much like this one I always had problems either blowing off tires or body catching air and flipping...

@marksullivan4180 3 года назад

Will the Proline 69 Nova body fit with this setup?

@KShep2223 5 лет назад

Why did you take the caster blocks off to remove shocks?

@bragilbe12 5 лет назад

Why didn't yall just paint the rims before you glued the tires on?

@jacobswartz3952 4 года назад

So what does the speaker do on this and the original truck

@Gtau3ngT 4 года назад

This is awesome

@Slowboi335xi 5 лет назад

You guys should build a street bandit, I’m hoping to do a series soon on building a traxxas bandit built for street racing.

@rcjoe406 4 года назад

Man good thing it looks so easy to do lol holy cow

@falangnoi 5 лет назад

YES I NEED THIS

@rcaddict7638 4 года назад

I have a regular slash that I’ve upgraded to a vxp bit it has a regular chassis is that ok

@justinchase4790 5 лет назад

I'm putting on the j concepts fox body mustang what rear body mount do I need?

@patricksimmonsme4646 5 лет назад

Pro line adjustable body mount kit

@loloshow9869 4 года назад

Cool video

@RekonRC 4 года назад

So are jato arms in the front better than bandit arms???

@kingestrda6880 5 лет назад

Awesome!!!

@angelhiguera3808 5 лет назад

What size is the tool to take out the tire

@Dj_Not_Nice 5 лет назад

Parking lot racing slash set up next?

@chasinfun813yt4 4 года назад

When I came to the traxxas place in Texas I saw this in the back and I also saw a X-max with paddle tires

@w4rr10r11 5 лет назад

when is the build on turning a stampede 4x4 into an xmaxx??

@809nel 5 лет назад

might aswell make a new dragster platform, this is excessive.

@zachattack4982 5 лет назад

Agreed

@rcOhio 4 года назад

809nel watching him twist that f’n screwdriver for 25 minutes is excessive

@kadenerickson6049 4 года назад

will this work with a nitro slash?

@timothywilliams9556 5 лет назад

What type of tool is that you’re using

@slbiggs36 3 года назад

Do you guys have any plans of doing an RTR kit?

@Largetalons 3 года назад

Yes

@coltontychsen6641 4 года назад

How much do all the parts cost together

@dawson_c1952 4 года назад

Can it fit 200mm body’s?

@graysonrutledge4867 4 года назад

This is cool

@cruisey9857 2 года назад

Do you not offer the Slash with LCG chassis anymore? You have to buy a reg Slash and then buy the LCG chassis?

@bobbysimpson5540 4 года назад

Kinks to the Traxxas Slash Vehicles dont work? Is this Model discontinued?

@jackisdaboss1764 2 года назад

So good the made it from the factory

@alexwiese1029 3 года назад

What was the thumbnail body part number?

@dawson_c1952 4 года назад

We need another one of these that’s a touring car

@ElliotM8 4 года назад

Drag slash yesssssss

@CrownHobbies 5 лет назад

I seen people add more of a rake look (lower front)

@RattrapRC 5 лет назад

Very nice

@freshcharge 5 лет назад

What's the cost on this parts list?

@jeremybrasher6629 5 лет назад

come on traxxas just make an rtr already!! I don't want to do all this. I just want to buy it! ;) :)

@Ecobeastsoffroad 5 лет назад

With the number of parts swapped out, why wouldn't you just start with a VXL Bandit and just swap in an LCG chassis? That's what i did and it was a super simple swap...and why use the Jato arms in the front?

@warrenstephens3705 5 лет назад

Just how much does this coolness cost $?

@RL-RL 5 лет назад

This looks more involved than an LS swap into anything. Just make one we can buy.

@PabloGonzalez-hv3td 5 лет назад

There are different ways to get similar results I just use stiffer shocks, on road tires and the proline body mounts with the stock Raptor body it's over powered and handles fine and would handle better with the mid motor chassis

@soonergaming4747 4 года назад

More involved than throwing a v12 in a Miata (yes it’s been done)