Project Of Construction & Installation Of Indoor Wooden Stairs - Beautiful Curved Wooden Stairs ! 

Косые ступени сделаны неправильно. Древесные волокна должны быть параллельны передней кромке! Дерево красивое - работа похабная.

34 года на стройке , последние 20 лет производством и монтажом лестниц, ну такой лажи ещё не видел😱

Почему ступени не покрыты защитной пленкой? Все зацарапали! Чтобы перешлифовывать?

Carving the end of the balustrade was mad skills!!

Surely they could put a protective covering on the finished timber

Я думал, что я косячник😂

царапины на выкрашеных ступенях?!... нет не слышал, ни разу...)

Beautiful job. Superb workmanship.

It's all fun and games until you drop some boiling tar on your toes. 😄. Nice job guys. beautiful work.

Like the steeltoed work thongs and especially the the cordless hot melt glue gun

OSHA approved sandals for pouring tar.

awesome work i would have color matched that end better though especially since you are going to see the joints forever

Dang. After about fifteen minutes in the work becomes awe inspiring. That's nice work!

Hats off to these skilled craftsmen. Finest thing I've seen in a long time.

I built boats in Vietnam and had the fortune of working with artisans like this and using, in my opinion, the finest teak in the world. You rarely, if ever, find an ornate staircase like that in the USA, and if you do, it would have been produced on a cnc, not by hand. Frankly, a staircase bought in component form from a DIY centre in USA and installed by someone that knows how to use a drill and a hammer is incomparable.

I subscribed just for the wood putty frisbiee tray tip.

Con tiện này Vuông 8×8,cm hay bao nhiêu em? Con tiện 2 đầu vuông trông sang trọng và đẹp

I don't know of any company anywhere, if not the world, who can do such Amazing work. The staircase spindles and bottom stool post, I have never seen such workmanship ever done as ornate as you guys have carried out here. Many thanks for this amazing video. From the UK

wouldn't the heat warp the wood? also aren't the weights scratching the shit out of those stairs!!??

Freehand power carving is awesome

Such a craftmanship, and floors are not protected at all. In NY this business will not last. Good luck!

Interesting. Wouldn't have thought that bitumen holds for long on that wood. Thanks for sharing.

I never realized that Nutella was so versatile. They must be from the same company as the guy that fixes broken sinks, countertops, etc with crushed up Ramen Noodles.

Rất tuyệt vời ạ cảm ơn bạn đã chia sẻ đẹp quá ạ

The workers are likely good at what they do but I wonder about the materials used and longevity and durability of everything shown.

Absolutely beautiful.

OSHA would have a field day with these buggers

very strong !! good job !!

Hay cảnh làm vi thuốc lào, phả khói ra khè mấy ông Tây ad ơi 🤣

Quê técnica de colagem dos degraus é essa?? Brasil tem não !!! Trabalho Lindo de Bonito!!

In Canada the maximum spacing between spindles is 4" (100 mm) and they must be designed to prevent climbing. All treads must be equal width and all risers must be the same height. This applys to residential stairs. Industrial building code allows for other standards.

thats one thin assed screw holding that ballister in

And the whole house is still covered in dust till this day XD

Excellent craftsmanship but somebody get these men some trowels.

Perfecto trabajo amigo 👍

Is that an adhesive on the external edging.... never seen bitumen on stairs before, seen it as a DPC, great video 🍺

i like the steel toenail safety flipfopd the firm supplied to the guy carrying the hot bitumin

Nicely done! Looks awesome. U R DA MAN. What country was this done at?

A very lovely ladder of death. Thank God I live in a world with code enforcement.

OSHA? We always pour HOT tar with flip flops!

As a professional stair builder in the USA, this was agonizing to watch... It's like a train wreck...

Keo phết chung quanh là keo jno sữa . Còn chất đen xì đó là nhựa đường,còn mọi người sợ nó mo gỗ thì mặt dưới người ta cắt chống mo bằng cách cắt những vệt sâu khoảng 1cm

amazing what you can do with a little road tar, an angle grinder, and a whole lot of skill. why use the nasty tar? why not use flooring adhesive?

Thợ Việt Nam quá giỏi 👍

That's how you avoid nails and screws. Good idea.

Stunning

Bon sang, et tout ça en slash (tongs si vous préférez ^^), juste dingue 😀👌 Quel est le bois utilisé ? What's the wood they used here? Teck?

Die Jungs sind verdammt clevere und gute Handwerker.

Amazing work!! What I don't understand is how those guys can work in that SQUATTING position????

super

Okie man anh trai oi .

Vietnam?

Clearly not in the US , staircase would never pass inspection by building inspector

Very bad work by unskilled workers. Crooked wavy molding lines done sloppy & fast, very bad light/dark color contrast in wood railing choice, out-of-plumb bottom spindle because it was cut too short, weak choice for "glue" adhering treads will fail in months of use. These guys don't care about their work at all. I hate how RU-vid will always praise hacks for terrible work if they only use expensive materials.

We're the hell is the load support here like 🤯

He basically only cut away everything that should not be there.

I'm surprised they don't lay any protection down on those polished marble floors, I've seen that on many of these videos.

Shoddiest building I've ever seen

What are the glues you used for the installation of the stair, sir?

szép munka

very good👍👍

Beautiful!!

Wow... very nice

Và đây có thể nói là cách lắp đặt mặt bậc và lan can gần như là mô hình xuyên xuốt ở Việt Nam có khác thì cũng k khác nhiều

Beautiful steps ,,but then they do not cover them..and track dirt..sawdust all over them...scratching them to pieces..

Why in the world didn’t they cover the treads? Why wasn’t the hand rail milled in the shop? I’m not impressed.

good job

no one is going to talk about the carrying of molten liquid with flip flops on and all the tripping hazards? I had a panic attack watching this video

Belo trabalho

Is that black piping hot residue tar?

На-глаз что-ли ступени ставят?

Definitely some impressive work, but I would not accept the scratched treads or the cracks in the steps.

Reminds me of a carpenter I knew who never cut a board the wrong length, ..................ya, that bad.

Работа конечно же супер, цена лестницы наверное космическая, всё из массива смотрю отходов сколько

are those flip-flops OSHA approved?

Why they out bare metal counter weights on those wooden stairs pieces. Already scratched, that means extra work afterwords fixing their sloppy work

that large decorative column needs to be up against the tread, thats code, attach it to the tread for stability, why on earth pu tit out there in the middle of the road? up against the end of that first tread for sure, generally that trd is cut back or trimmed so a column that size can get close to the stairway, then the way it goes around the turn higher up that's not even close to code... WHY?

matercraftsman!!

дорогая халтура. даже у нас в городе лучше сделают

That cough at 8:40 right after some sort of power tool is heard in the back ground..These guys are probably packing around several kilos of saw dust and crystallized tar-sludge in each lung!

I guess they don't bend wood there?? Far easier - and better.

все оцарапали (

Video này ở Việt Nam nhé

👍👏

Just throwing down hard bricks right on the wood with no protection. Haywire.

Мосты так же делают по ходу, на глаз, без рулетки и уровня...

Such an enormous number of comments intended to drag the builders down with criticism of all sorts , and rude remarks . Why do you think it’s ok to tear people to pieces like that .

Молодец супер красивый👍

sure on the video it looks great but up close not so much

Nìce jobs

Nhà người ta ở chứ có phải xưởng mộc của các công đâu thợ quá Nghiệp Dư quá bình thường công qua người ta làm sẵn ở nhà mang đến lắp kiểu cầu thang này quá dễ là quá bình thường làm như các công học sinh lớp 10 nó cũng làm được

How can I get your contact for learning?

Tar? Indoors? Jiezz

how about wearing some shoes !!!

Ступени даже не подмели

Why not use a Ramset to attach those treads?

syfu narobili w chacie, po kaflach wielkoformatowych jakieś lepiszcze smarowali, chodzenie po przewodach. Film instruktażowy, jak nie powinno się roboty robić a człowiek od BHP dostałby zawału. Najwięcej roboty to miała osoba, która sprzątała po nich ten syf. Rozumiem, że to biedniejsza część świata, tylko czy te ciężarki nie powinny być zabezpieczone, zeby drewna nie porysować? Czy stukanie drewnem o drewno bez podbitki nie robi zniekształceń? Chlopaki powinni mieć maski, chować sprzęt przed wiórami i czyścić pracownie. Nie miałbym pretensji do samych pracowników tylko osoby, która nimi zarządza. Wynik pracy mimo to oszałamiający. Zastanawiam się dlaczego strugacie u klienta zamiast pobrać wymiary, odległość i wysokość, zostawić trochę więcej i minimalnie poprawić.

As a finish carpenter I say this is terribly crude work. And someone is going to break their hip coming down that inside corner. I would be ashamed to post this on RU-vid.

Hard workers but poor construction and no safety of any kind with a finished product less than desirable