Pronterface Interface Overview - How to enter G-Code directly into your 3D Printer and more! 

I can get Pronterface to Auto home (all axis at once) and to set the bed and nozzle temps. But, it won't move the X, Y and Z axis separately. Can you offer any advice? Thanks in advance.

What is the Red Circle in the Middle of the Axis Controls?

I am having issues getting pronterface to accept the "done" for benchy. It says{ WinnError5} Access denied: tempstl. What am i doing wrong?

WHAT IS @:127 IN TEMPERATURE LINE?

When I go to port it says none like whattttt

Me ajuda por favor... Esse erro eu não consigo resolver Traceback (most recent call last): File "pronterface.py", line 62, in File "printrun\pronterface.py", line 2582, in __init__ File "printrun\pronterface.py", line 170, in __init__ File "printrun\pronsole.py", line 786, in parse_cmdline File "printrun\pronterface.py", line 1154, in process_cmdline_arguments File "printrun\pronsole.py", line 769, in process_cmdline_arguments File "printrun\pronsole.py", line 664, in load_default_rc File "printrun\pronsole.py", line 635, in load_rc File "cmd.py", line 211, in onecmd File "printrun\pronsole.py", line 412, in default File "cmd.py", line 236, in default AttributeError: 'NoneType' object has no attribute 'write'

OMG you just taught me a lot I was playing with pronteface but was only connecting and moving my Y & Z axes now I can do more Thanks to you!!😅

I realize this is an old video, but can you tell me how to configure what the software is telling in the window that you put in the code? It keeps telling me how long is left after each line segment. It gets really annoying.

When I go to printer face it doesn’t show any of my files on the plater can someone help me

great work!! very helpful!!

Can you control multiple printers with pronterface?

Hi I know its 9 months but have question my creality cr 10v3 will not connect to pronterface my other 3d printer does

I was having troubles but now I am happy. I like this right out of the box. Im printing a Prusa slicer made gcode now. I was moving a sd card back and forth and it was making me crazy. I do not know how that is acceptable for some people. I hate Cura that came with the printer. i would like to use wifi as i just put in the module but this is ok. I have not sliced anything yet but I think it will be ok. If it slices well it will be the best software. If they ad wifi it will be the best bestest.

OMG you just taught me a lot I was playing with pronteface but was only connecting and moving my Y & Z axes now I can do more Thanks to you!!

Awesome video, thanks for sharing. I wanted to stop a print from failing remotely and this video answered my question, thanks.

I have to click Connect and then press Reset a couple times before my delta will connect.

And why does my Delta go crazy when I push it?

Very helpful easy to follow.