Honestly that’s the one thing I forgot to do is measure that distance. If you wanna measure yours I can measure mine and get you an accurate measurement. My IG is HDRyderCT.
I put one on mine and it measured 2 3/4” from the center of the lever on the closest setting. Honestly it felt the same as the stock if not a touch further. I got a Softbrake reduced reach clutch lever and now it’s 2”. Major difference! The PSR felt like junk build wise.
I had these levers on my ultra limited for over a year and they started to fall apart. One of the adjusters jammed up and the other lever became very loose. After an attempt to repair them I re-installed the stock levers. Very disappointing for the money they cost. I hope you have better luck.
Interesting. Well I’ll be testing them so if I have any issues I’ll report back but knowing that I’ll have to keep the stock levers with me just in case.
These don’t seem to as well designed as they should’ve been, but I don’t have a 24 model year, so I can’t speak from experience. I do however have a set of the FLO shorty adjustable levers on my 23 softail, the front brake lever is great, no issues or complaints, however the clutch lever would’ve nicer if it was designed to be a half inch longer. It doesn’t need the extra length for leverage, it’s just my sausage like fingers would align better on the clutch lever.
They are very well designed and solid levers IMO. A lot of the restrictions are with the HD setup itself on these bikes although idk how the brake hold issue when on level 1 was missed during R&D. I’d assume that would be adjust in future revision. I should be getting a set of their Anthem Pro levers when available to test out and that be one of the first things I look for. The Anthem Pro’s are nice because you can adjust the slide so can be shorty levers or full size levers so those may work for you better.
On these levers on the lowest setting the bike still started no issue. I have their Anthem Pro Levers on the bike now which have even greater adjustment. Was working on a follow up video for the new levers so I’ll have to look and see if that changes anything. Stay tuned! Thanks for the question.
Did you have any issues with the cruise control working? I installed a set of FLO adjustable levers on my 21 SGS, and could not get the cruise control to engage. The problem seemed to be with the clutch side. Just curious if there issues with this manufacturer. Thanks, Mitch
I just put a softbrake lever on. The rocker piece connected to the lever is supposed to press onto 2 thin metal tabs to hit the tiny switches. Somehow one of the nubs ended up underneath one of the tabs so it wasn’t pushing one of the buttons. I think it’s like a clutch position switch. I just put mine back together so I’ll report back if my cruise control comes back on
@JoeGoeMotorcycleAdventures yeah I ended up bending mind slightly when I put the Anthrm Pro’s on. Was able to get it all squared away and no issues though thankfully.
@@hdryderct nice. I didn’t have that issue when I installed the PSR. I must of put it in at just right the angle for the arm to go under the tab. Glad you fixed it!