PT#19 RGB LED Cube 8x8x8 Palta Style

Подписаться 1,1 тыс.

Просмотров 17 тыс.

50% 1

RGB LED Cube 8x8x8 Palta Style
Actually a recreation with a little modification from Kevin Darrah's LED Cube RGB.
Here is the link to one of Kevin Darrah's video for the original RGB Cube
• 8x8x8 RGB LED Cube - T...
I learn the schematic from Kevin Darrah, and make my own style from it.
I made the PCBs for it so it look more beautiful and neat without all the cables.
And this is the making process from the beginning until finish.
You can see the result at the end of the video.
Enjoy.
Wiki page for this project can be found at:
wiki.indopalta...
And the source code used in this video also can be found at :
github.com/pau...
Visit PALTA store at marketplace to get PALTA's boards
Indonesia Only :
- bit.ly/TP-PALTA (Tokopedia)
International :
- bit.ly/Tindie-... (Tindie)
- www.elecrow.co... (Elecrow)
Aliexpress Affiliate link.
s.click.aliexpr...
Buy anything through that link and PALTA gets a commission at no cost to you.
If you don't have aliexpress account yet, join through this link will give you US$19 in coupons
s.click.aliexp...
#arduino #ledcube #rgbcube #8x8x8

Опубликовано:

12 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 76

@InsanSains 3 года назад

Ninggalin jejak master plus 3 clicks to appreciate your works. Saya yang tanya lewat marketplace hijau. Thanks a lot sudah sharing dan sukses selalu.

@sufiyanbuiya 2 месяца назад

thanks' for the suggestion.

@binarybox.binarybox Год назад

I have built 3 of Kevin's cubes shortly after it was released...1 with clear leds and 2 with diffused leds....I decided to use 2803 drivers instead of lots of transistors....I have 3 veroboards , one for red , one for green and one for blue....plus a small board for the arduino , chips and mosfets....I would have liked a pcb to save time trying different ideas on connecting the leds to the 2803 chips. I like the pcb boards in this video and think it makes a neat base without a mass of connecting wires....and it has a low profile unlike mine. A nice build, Paulus.

@ptanuri 10 месяцев назад

We've got the complete kit available here bit.ly/ECPaltaCubeRGB888

@phoenixkepo2743 2 года назад

WoW!

@user-qj6ze8wd1o 6 месяцев назад

I really love this design, very compact. Is the Arduino not included in the kit? I presume there is an on board interface?

@ptanuri 6 месяцев назад

Hi. Glad that you like it. There are 3 pcbs in the kit. 1st for the LEDs base, 2nd for the shift registers, 3rd for the MCU (ATMega328P) which is Arduino UNO compatible. All components needed are included :)

@KingWhiskers1 3 года назад

All I can say is "WOW" what a fantastic RGB Cube. I love the way you have used the pin headers to connect the boards together. Really neat and tidy. Are these boards available to purchase and at what cost, I have visited the PALTA store and can't see them. Also are the Gerber files available to get them made? If the dimensions are 183 x 183 mm it is a really compact board for a RGB board. The other RGB boards I have seen are 9" 228 mm I have been toying with the idea of building one similar to this. Thanks for your amazing work it is really brilliant.

@ptanuri 3 года назад

Hi, Thank you. I did plan to put it up at Tindie, but the recent workload at my main job kept me very busy lately. I'll try to find time to do it soon. Also considering put up the board design. Really sorry for the delay till now.

@KingWhiskers1 3 года назад

@@ptanuri Thanks for your reply, could you tell me the exact specification of the 192 resistors please. I am guessing 200Ω Standard E24, ±5% value but I can't be 100 % sure. they could be Standard E96, ±1% value and what rating are they, 1/2 W 1/4 W.

@ptanuri 3 года назад

@@KingWhiskers1 you should able to use any type. It is only to cap the current for the each LED.

@ptanuri 10 месяцев назад

we've got the complete kit available here bit.ly/ECPaltaCubeRGB888

@KingWhiskers1 10 месяцев назад

@@ptanuri Hi Paulus, many thanks for your reply. I have cloned your design with a few modifications and size changes to make the led legs more even. I have sourced all the parts to make 2 cubes and I just need to get the boards made. I have copied your logo in miniature with a note to credit you and Kevin Darragh. It has been a learning curve for a 70 year old to get his head around Kicad and start from your schematic. I hope to get the boards made soon but other things and health issues have taken priority at the moment. Getting the schematic to work in the first place was a bit difficult for me because of errors I kept getting but eventually I got it sorted. Now I have just found out why my eyesight is failing. I have a cataract on my right eye, this is operable and will hopefully be sorted soon. Again, many thanks for your inspiration and hard work. I hope that this is a success for you in sales. Kindest regards KW🙂

@trardac 2 года назад

güzel olmuş paul usta nuri

@ptanuri 2 года назад

çok teşekkürler

@user-qn7gy5wq9i 11 месяцев назад

godd jobe

@anggiapririrana8420 3 года назад

Buat tutorial arduino gan buat pemula, penjelasan nya mudah dipahami mantap

@ptanuri 3 года назад

kan sudah banyak tutorial buat pemula :) Memangnya pengen liat video tutorial tentang apa ?

@anggiapririrana8420 3 года назад

@@ptanuri iya gan memang banyak tapi kurang tentang penjelasan coding nya, pengen belajar eeprom gan mau nyimpen data id card ke eeprom tapi belum paham betul soal eeprom

@burapat4100 2 года назад

Utk kaki pemegang pcb ada jual gak iya... Tq

@DanielPecanha1337 Год назад

Nice project, I tried to buy it but it's not available for Brazil, can you please make the pcbs design available, so I'll make one here too, thanks

@ptanuri Год назад

Hi. Thank you. Yes, unfortunately currently there is no stock for the kit. But I am currently working with a supplier to make it available again soon. I believe they will also be able to ship to Brazil. Will update you again later.

@ptanuri 9 месяцев назад

Hello, you can get the complete kit here bit.ly/ECPaltaCubeRGB888

@lambeturah2004 3 года назад

Sehat om saya maftuh

@ptanuri 3 года назад

sehat.. sehat mas ?

@solongu Год назад

WOW that's amazing, can you give me the pcb file ? i really want to make it ...

@ptanuri 9 месяцев назад

Hello, you can get the complete kit here bit.ly/ECPaltaCubeRGB888

@mathieudecombe446 3 года назад

Bonjours C'est une très belle finition les plaques imprimer 👍 Comment est ce que je peux m'en procurer ?

@ptanuri 3 года назад

Bonjour, Merci pour le compliment. Je le rendrai bientôt disponible chez tindie. Et ça?

@5VoltChannel 3 года назад

Akhirnya keluar juga made in indonesia PCB nya, btw PCB nya dimensinya berapa gan.

@ptanuri 3 года назад

183mm x 183mm :)

@ptanuri 3 года назад

Penggemar LED juga kayanya yah?

@5VoltChannel 3 года назад

@@ptanuri ho oh gan..😁

@5VoltChannel 3 года назад

Saya subscribe gan.

@ptanuri 3 года назад

@@5VoltChannel thank you. saya juga mau subscribe nih. :D

@ManelitoSmiths 3 года назад

Hello, your explanation is very good, congratulations .. How to buy a pcb to make this cube? .. Thank you very much.

@ptanuri 3 года назад

Thank you. I plan to put the kit available at tindie next week. Still sorting and preparing the components.

@ManelitoSmiths 3 года назад

@@ptanuri thanks for responding, I'll be alert when you put it.... thanks

@ptanuri 9 месяцев назад

@@ManelitoSmiths hi. if you still interested, you can get the complete kit here bit.ly/ECPaltaCubeRGB888

@Tran_Tam37 2 года назад

Tôi ở Việt Nam làm thế nào để mua pcb

@bagasadekoktaqim6040 2 года назад

Beli pcbnya dimana bg?

@ptanuri 2 года назад

follow marketplacenya dulu yah. link ada di deskripsi

@syafruddinnasution7507 2 года назад

Dimana belinya gan set, balas

@ptanuri 2 года назад

Sudah di post nih www.tokopedia.com/palta/kit-arduino-led-cube-rgb-8x8x8

@arduino6408 4 месяца назад

How can I buy?

@ptanuri 4 месяца назад

The kit is available at www.elecrow.com/led-cube-rgb-8x8x8-kit-arduino-compatible.html

@makmurina7403 3 года назад

Pcbnya sudah ready pak...?

@ptanuri 3 года назад

Belum order lagi. Mau pcb nya saja ?

@dhitoajitriprabowo3147 3 года назад

@@ptanuri PCB nya saja ada?

@bagoesdhafitha8642 3 года назад

Belum ready gan

@ptanuri 3 года назад

iya nih, kantor pos kena pandemi nih, ga sampe sampe :( Sedang dicari solusi alternatif nih

@bagoesdhafitha8642 3 года назад

@@ptanuri kisaran kena diharga berpa gan

@ptanuri 3 года назад

@@bagoesdhafitha8642 hitungan kasar bisa 1jt gan, atau malah lebih

@sonlocnguyen545 2 года назад

Where to buy !!!!

@ptanuri 2 года назад

Kit not up yet. Can subscribe first. Will update how to get. Where is your location btw? I still not sure about the shipping. The copper wire add a lot of weight.