I love how easy ducati made the mods to be installed on this bike! This is what every manufacture should do, have wires easy to be disconnected and easily accessible. Makes everything much cleaner and easier to maintain! Keep up the good videos :)
nice video. one question (another Monster topic) .. while riding inside the city, with some heavy traffic... so not much room for keep moving... how ofter the cooling system runs and how hot is the average (engine)... as mine stays mostly at 100 degrees while stuck a bit on the traffic.. thank!
These engines do not like stop and go traffic. Mine will be around those temperatures in that scenario too. Normal for these bikes, nothing to worry about!
Mr. Thomas! Hope you are doing well! You need a very small inbus for that. I ended up using a torx size 8 cause that fitted too. Be careful cause the material is very fragile. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-kC75n0LLdDU.html
@@motorcycle-man thx i'm fine i hope you too. I am asking because I'm not sure whether torx or inbus and because the whole thing is so "fragile". My reading glasses are not strong enough but.....why do we have a mobile, i will try to zoom in today.
@@thomasdusseldorf1025 RU-vid on mobile should allow you to zoom now with two fingers. Both torx and inbus should fit. My inbus was a bit of a cheap set so for these small sizes it was a bit loose and didn't want to ruin the bolt. I held the rubber bolt on the inside with my fingers as I started twisting the bolt just enough so I could do the rest with my fingers. I hope all this helps, if not please message again.🙏