Very excellent presentation with practicality and theory. Learned a lot of how this thing works. 4 thumbs up with my socks off. All the best to your technical program.
Excellent explanation and simple in nature to understand. keep it up!!! And always keep your explanation in English so that the majority can understand.👍👍
Thanks for the video =) I came here after our motor kept running despite the water tanks being fully depleted. Seems that our pressure switch is faulty based on your video! We will be getting it replaced soon. Thanks again for sharing!
This knowledge shared is really expositional. I am indeed indebted to share with those who will be interested. Thank you for this philanthropic project.
Great video. Well explained. Can you elaborate how to reduce the pressure? My unit give 4.5 bar and I need it under 4 bar. You had mentioned to turn the spring inside the yellow cover. Can you explain further please
Thanks for sharing, the only part I'm missing is when the system has reached max pressure meaning the sensor has reached peak level & motor is switched off, how does sensor remain in that position without the system loosing pressure? I'm also failing to understand how the lose of pressure on the discharge side moves the sensor down. My thinking is highly on the mechanical end, please shed some light on this.
Thanks for watching. If you're not subscribed, kindly subscribe. Referring to your queries, the diaphragm plunger has permanent magnetic, and it triggers the high and low pressure Reed switches. The plunger diaphragm is being pushed by the spring and counter acting on the water pressure inflows. I hope I satisfy you with your doubts. Thanks, and have a great time.
Thanks, very helpful. My Kin pumpcontrol doesn't always start the pump up when water pressure is down. Seeing your video, it's most probably the magnetic switch which is carbonized after 10 years of use.
Galing idol yung sa motorpump nmin ang problema malfunction pk yung same pressure switch kya need na reset for 5x pag ng bild up pressure na yun ggana na cya automatic
Just an update. After looking at this video. I took out the circuit board and service the relay. I'm glad to say its working now. Before the pump wasn't cutting off so I assume the relay contact were sticking. So far its working great. One question though, when the circuit board is out from it assembled position and power is applied to the board, is it normal for the relay to closed? I saw this happening and wasn't sure. But I installed it and its working the way it should. Thanks Randy.
I learned lot from your vedio I had installed DJ pressure switch but the problem I am facing. My switch is not working when I turn on the tape. I need to cut the supply to switch it on after closing tap after some time pump switch off automatically but again when I am turning on the tape pump is not working automatically again I have to switch off electric supply. Please guide what could be the reason?❤
Yes possible, but the pressure switch must be reconfigure install at the main supply line of both pumps. Using selector ball valves to select pump to be used to control flow of water. Then your pump control switch selector must be on by which pump to used.
Thanks for the information bro . Last few days ago my pump doing some trouble pump stop pressure switch need rest it's work again for few days than it's will be happened again please tell me what's the exactly issue
Yes you can use for shallow well. Not required water tank, since your installing non return valve. Once you open your water faucet and pressure decrease it will pump on and cuts off when your shut the faucet or once it reach shutting off pressure. But if standby pressure not always constant, it will not turn on easily.
@@LEARNWITHRANDY8 sir is it possible to use one pump combination for water tank and booster . Supply is shallow well i want use my 3500 ltr. tank at the same time for pressure boosting using only one 1Hp pump.
When the supply water has no water,its automqtic turn off the motor. How about when the water returns or its already available, is the controller automatic turn on the motor?
Hi sir.....in my house no leakage but my automatic kit turning on and off every 5 minutes...without any leakage and without using water...how to fix this problem
