Punch System and Punches (Overview )- Watchmakers Staking Tool Set

Подписаться 3 тыс.

Просмотров 4,9 тыс.

50% 1

The staking tool set is really
versatile. I bet it's used a lot more than any of of stumps and punches, you could probably do about anything in watch repair!!
I'm going to go through and do an overview of the punches that are in my set.
My set has a 120 punches that came with it. It's really important that you choose the CORRECT
punch to do the job that you'll be working on because you take the chance of 1) damaging the punch and 2) damaging the part that you're working on.
I will explain the numbering system on my Watchmakers Staking Tool Set and how that compares with another set.
This video and channel is about antique pocket watch repair/restoration for the hobbyist, beginner and intermediate pocket watch enthusiast!
Get to know me and support me on Patreon: I would really appreciate it!
www. Patreon.com/MyHobbiesareNOTCheap
Support me by buying merchandise that I have created especially for you! (I get a portion of the $ for the items you order):
my-hobbies-are-not-cheap.mysp...
If you found this video helpful, please like it and SUBSCRIBE to the channel so that you can be notified of the videos as I put them up!
Thanks for watching!
Membership:
National Association of Watch and Clock Collectors (NAWCC)
00:00 Introduction
00:17 Watchmakers Staking Tool set Versatility
01:12. Closing up pivot holes with Staking Tool Set punch
01:45 Importance of choosing the correct Staking Tool Punch
02:30 Numbering System of Punches and Reasoning
03:00 C & E Marshall Staking Tool Set Punch numbering system
03:15 How to find the companion punches
03:48 K & D Staking Tool Set Punch Numbering System for companion punches
04:20 Why Use a BRASS hammer with Staking Tool Set Punches?
04:30 What is a Punch Lifter/Extractor and why is it needed?
04:56 What is a Flat Faced Hollow Punch and what is it Used For?
05:26 What is a Flat Faced Solid Punch and what can it be Used For?
05:49 What is a Tapered Mouth Closing Punch and What is it Used For?
06:30 What is a Roller Staking Punch and what can it be Used For?
06:55 What is a Screw Knocking Punch and what is it used for?
07:19 What is a Centering Punch Used for?
07:50 What is a Round Faced Hole Punch Used For?
08:15 What is a Round Faced Solid Punch Used For?
08:39 What is a Double Roller Punch Used For?
08:52 What is a Collet Closing Punch?
09:23 What is a Cross Hole Punch Used For?
10:09 What is a Stretching/Peening Punch Used For?
10:30 What is a Four Sided Pointed Punch Used For?
10:48 What is a Prick Punch Used for?
11:18 How to use your Staking Tool Set Punches as Stumps
11:38 How to get dirt out of the inside of Staking Tool Set Punches

Хобби

Опубликовано:

26 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 30

@myhobbiesarenotcheap 10 месяцев назад

Correction to what I said at location 03:23: I SHOULD have said " That punch the A2 would be found on the opposite side of the case located in the same position you found your B2 punch on the other side. ( I said "B3 instead of B2"). This was also corrected in the subtitles. Thanks for your patience!!🙂

@ron2143 10 месяцев назад

Really enjoying learning from your videos on the Staking Tool Set and for taking the time to make them and share your knowledge. Your style and way of presentation is perfect for learning and that's often rare on RU-vid. Slowly getting through your other videos and thoroughly enjoying them. Many thanks and well done.

@myhobbiesarenotcheap 10 месяцев назад

Thank you so much for kind comment. I am so glad they are helpful for you!

@khronosbest9448 10 месяцев назад

Much appreciate you making these videos. Always something new to learn especially when it comes to watches and their repair so thanks again ! 🍻

@gesshoku92 8 месяцев назад

Thanks for making this, really informative!

@myhobbiesarenotcheap 8 месяцев назад

Glad you enjoyed it!

@FannieLaGreca 10 месяцев назад

Thank you now I can organize mine.

@SkyBlue-le7cd 8 месяцев назад

Thanks for your excellent video.

@myhobbiesarenotcheap 8 месяцев назад

You are welcome!

@markclelland3510 10 месяцев назад

Great video! Thank you for sharing your knowledge, it’s much appreciated.

@CeesMaas 10 месяцев назад

Great information! Thank you!

@awdturbopowah773 10 месяцев назад

Thank you so much for making these staking set videos! Like you mentioned, there really isn't a comprehensive RU-vid series about it. Just some basic tutorials but nowhere near the information you've given in this series. Now I just need to summon the motivation to actually organize my K&D set, as all the punches & stumps got jumbled around in shipping, and so it's all out of order 😅. Can't wait for more videos, and thanks again for the wealth of great content. Cheers! 🍻

@myhobbiesarenotcheap 10 месяцев назад

I was frustrated when I first got my staking tool set back around 2000.. and even through the years, it has been hard to get information. That is why I decided to make these videos - to help others out as much as I can. Thanks for this very nice comment. You have motivated me to do many more videos on the staking tool! 🙂

@awdturbopowah773 10 месяцев назад

@@myhobbiesarenotcheap Terrific! It’s so amazing to have these resources 🙏 Truly grateful to you & all the wonderful creators that take the time to create educational watchmaking content.

@wildernessofzinn17 8 месяцев назад

Thank you so very much. That was a very helpful video. There is nothing out there and I have no clue what most of these strange-looking punches are for. I have a staking set with 100 punches and 20 little stumps (plus the punch removal hickey). It has no markings on the old wooden box, no letters or numbers on the punches, nothing, but it has most of them I need.

@myhobbiesarenotcheap 8 месяцев назад

Glad it was helpful!

@tmmkk1 9 месяцев назад

Thanks you so much for taking time to teach us it is so helpful. 👍

@myhobbiesarenotcheap 9 месяцев назад

I am very glad this is so helpful! I also appreciate you letting me know, because it keeps me motivated!

@brunom5333 10 месяцев назад

Bonjour , j'ai une petite question , vous le professionnel en montre de poche , avez-vous déja tamponner des piveaux sur uu cylindre , je vient juste de trouver dans un lot les tampon pour réaliser ce Travail , au plaisir de vous retrouver et visionner vos Excellente vidéo 👍👍👍

@myhobbiesarenotcheap 10 месяцев назад

I have never worked on cylinder watches, so I have no helpful information .... you could post a question on pocket watch facebook groups - you may get a helpful answer. Thanks for watching!

@thatoneguy2169 8 месяцев назад

Would this work on modern mechanical wristwatches?

@myhobbiesarenotcheap 8 месяцев назад

Yes, it will.

@billsexton5532 10 месяцев назад

I have some stumps that are threaded on bottom how can I show you

@myhobbiesarenotcheap 10 месяцев назад

I am not familiar with these stumps. I recommend posting a picture of these on the FB group "Amateur Pocket Watch Repair" and see what feedback you get there.

@billsexton5532 10 месяцев назад

I have a set that was given to me it had some tools like stumps in it there threaded it has a Stand that you can screw into does anyone know what they are

@myhobbiesarenotcheap 10 месяцев назад

Just a guess.. the stumps could be used for removing and replacing "friction fit" jewels.