Puri - RC Flying Wing - Time Lapse Build

Подписаться 12 тыс.

Просмотров 121 тыс.

50% 1

In this video I will show you a time lapse build of the Puri RC flying wing. The Puri was presented in the September 2021 edition of the German RC magazine FMT.
On the website of the magazine you can order either a laser cut kit, a printed or a digital plan (check detailed links below).
Link to the flight video: • Flying the Puri - RC M...
Ordering link for the laser cut kit: en.shop.vth.de...
Ordering link for the plan: en.shop.vth.de...
Ordering link for the build instructions: shop.vth.de/ba...
Specs:
Wingspan: 650 mm
Length: 260 mm
Wing area: 8 dm2
Weight (AUW): 135 g (in my configuration)
RC functions: elevator, ailerons, motor
My configuration:
Motor: Hacker A05-13S kv3200
Prop: Hacker GWS Prop 4 x 4 HD
Battery: LemonRC 2S-350, XT-30
ESC: Hacker X-5 Pro Brushless Controller (5-10NC/2-3LiPo)
Receiver: Graupner GR-12L HoTT - 2.4 GHz, 6 channel
Servos: 2x HiTEC Servo HS-40, 20x8.6x17mm, 9,8Ncm, 4.8g
Covering film:
ORALIGHT transparent orange
ORALIGHT transparent blue
ORACOVER white
ORACOVER Hotmelt Adhesive (960)
ORACOVER Thinner for Hotmelt Adhesive (980)
Vinyl:
d-c-fix glossy black vinyl
Other material:
Screws for motor attachment to firewall: 1,7 x 6 mm (minischrauben....)
Shrinking tube to secure the control rods: diameter 1,5mm (0,5 mm shrunk). I added a drop of CA glue to be on the safe side :-)
Note: This video is not sponsored. I only recommend the stuff I used and that worked well for me.
Cutting machine:
BROTHER ScanNCut SDX1000
Camera:
Sony HDR-CX730
Microphone:
Rode NTUSB

Опубликовано:

28 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 253

@abhilashv. Год назад

I have taken somany tips from this channel, cheers mate, keep up your great work

@bavarian_rc Год назад

Thanks a lot! I am learning something new with every build I make and I am happy to share it with the community. Finally getting such positive feedback is giving my motivation a really nice kick 😊 Greetings from Bavaria

@stevenmohr4588 2 года назад

Outstanding video demonstration! Thank you kindly for sharing your building techniques, I leant so much. 👏👏👏👌

@bavarian_rc 2 года назад

Thanks a lot! Great that you liked my video and learned something new in the way I build 😃

@paulbrouyere1735 2 года назад

Congratulations with this neat build. Thanks for using balsa, the real stuff, lasts for decades when treated well.

@bavarian_rc 2 года назад

I started the hobby when I was a kid using balsa. Since then the technology has advanced a lot but balsa is still there. Although I also have foamies and GRP planes I totally enjoy building balsa planes. It makes you so proud when you see it finally in the air.

@paulbrouyere1735 2 года назад

@@bavarian_rc How great, I also started as a kid like that. I’m really looking forward to your maiden flight with this flying wing! (My first made model was with wood from a cigar case from my father and it crashed immediately)😅

@bavarian_rc 2 года назад

Hi Paul, seems we went through a similar career path in our hobby. Having a memory like you about your first plane built from a cigar case is something great! I hope I can pass something like that to my kids. By the way the little Puri had its maiden flight last Monday. Flies fantastic even in the windy conditions we had. Making a flight video will be a challenge due to its size. Onboard video will be a no-go I fear. But I‘ll see what I can do.

@paulbrouyere1735 2 года назад

@@bavarian_rc You’re really right about not having on board video because it completely destroys aërodynamica of the plane you’re trying out.

@bavarian_rc 2 года назад

When I attached my heavy and big Insta 360 One X on my Triple Neo Speed (ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5njUNvx_JF8.html) it had the performance of barn door 😂

@TrailcamsRCPhotoFlying2000 Год назад

Well done. Nice airplane and building technique. Looking for the maiden video next.

@bavarian_rc Год назад

Thanks a lot.

@wollibar5263 Год назад

Super sauber gemacht, sehr schönes Video, bravo!

@bavarian_rc Год назад

Danke, freut mich dass es Dir gefällt!

@nsbob70 2 года назад

what seems like a looong time ago now, my last project was a Carl Goldberg Tiger 60 kit, with retracts and a 4 stroke. I haven't built anything in years now. This little kit looks like a great refresher for sure, and nowadays with electrics being as dependable and fun as they are, I sure would like one of these! at 8:40 or so, what!? no hot sock on that iron!? Buy, you're brave! ;) What a great covering job. Not much more rewarding and almost instantly gratifying than doing a slick covering job! Looking great so far.. That's a pretty slick sticker making outfit ya got there too. What a cool little wing! Looking forward to the maiden flight video.

@bavarian_rc 2 года назад

Sounds like it is more than time for you to start again a new build 😃 My good old more than 30 years old Graupner iron has never let me down. Honestly I don‘t like using a hot sock. As long as I keep an eye on the correct temperature it always worked out… almost 😜 Great that you liked the covering job. It was taking almost more time than the rest of the build. But I’d rather spend more time and then have a result that looks exactly as I want it. The maiden flight was last Monday and went pretty well. This little wing is quite fast and can turn almost on the spot. Doing a flight video will be a challenge… this thing is so small!

@nsbob70 2 года назад

@@bavarian_rc I've found while doing those nice neat, 'corner folding' jobs with monocote, that's when the adhesive can get on the iron surface and then get on other bits of covering. The sock tends to help that a bit. But yes, I too LOVE to spend tons of time on covering jobs for sure! (wish I could post a picture here) I also have one of those smaller, tiny irons for really tucking in to the small areas as well. There's not much more rewarding than looking at a great covering job, especially with those clear colors! Looks GREAT!

@bavarian_rc Год назад

I know what you mean. I think oracover is no different to monocote. Currently I am building my next project and I am already thinking about how to cover it. Has to be different and cool and ... well let's see what I will come up with.

@flyman_guy 2 года назад

каждый раз когда я смотрю такие видео, я вспоминаю, что хочу себе лазерный CNC

@bavarian_rc 2 года назад

Yes, I know what you mean... and then I look at the price of a CNC or laser... and go on ordering kits 😂

@pilot225588 2 года назад

Иметь станок это пол беды, надо ещё и чертеж раздобыть или перерисовать в электронный вид, и закупиться качественной фанерой.

@bavarian_rc 2 года назад

I can imagine that this is quite some effort

@raZZkataeV 2 года назад

Полупроводниковые резаки на Али сейчас дешевы

@raZZkataeV 2 года назад

@@pilot225588 чертежи для резки этого самолёта 14 евро

@gusto8935 2 года назад

very beautiful work.

@bavarian_rc 2 года назад

Thanks a lot!

@Timessquareful 2 года назад

Einfach nur Super, tolles Video😉

@bavarian_rc 2 года назад

Vielen Dank 😊

@hansjohannsen6722 Год назад

Thanks for sharing

@bavarian_rc Год назад

With pleasure!

@mahmoudhusseinmohamed3394 Год назад

Wonderful video. Where can I buy the heating tool did you use? And what what it’s name?

@bavarian_rc Год назад

Thanks, I am happy that you liked it. I think you mean the heat gun which I used to shrink the shrinking tube around the receiver. The one I used is a Steinel HG 2320 E (www.steinel.net/en/heat-tools/products/product-overview/professional-heat-guns/hg-2320-e-csid-57240.html). I bought it on Amazon.

@mahmoudhusseinmohamed3394 Год назад

@@bavarian_rc no, I mean the heating Iron used to stretch the colorful lamination on the wooden frame

@bavarian_rc Год назад

Ah ok, it is an old Graupner covering film iron. I have it since 30 years. Finally it stopped working a few days ago. Now I have this one: www.amazon.com/dp/B07Y2X7JYW/ref=mp_s_a_1_1?keywords=rc+covering+iron&qid=1672517182&sr=8-1 I bought the one from Jamara which is technically the same.

@christer8964 2 года назад

FMT magazin still exist? I have been missing magazines like that, I used to buy in a local magazine-store. But since Internet got popular and people seemed less interested in technical DIY magazines, like about electronics, RC hobby, ..., it disappear from the magazine-stores.

@bavarian_rc 2 года назад

I‘ve been reading FMT already back in the 80s when I was young and spent a lot of time with my RC hobby. As time marched on I had other priorities in life. But finally 6 years ago I re-started the hobby. I was totally amazed that FMT was still existing.

@christer8964 2 года назад

@@bavarian_rc I read it in the late 80s to early 90s. I am also re-starting my teenage hobbies. I started a subscription on ElektorMag. And I will definitely have a look at FMT again. There was an even more interesting Swedish magazine, back in the days, that only came out once per year in paperback book-form. Instead of filling the magazine with product testing and commercial, it was packed with drawings and schematics of electronics from DIY hobbyists/engineers. That magazine was like a gold mine. Maybe it still exist a similar magazine in Germany.

@bavarian_rc 2 года назад

It‘s hard to find good magazines nowadays!

@mydogworriesalot1840 Год назад

Yes I like this too,do you think you could freelance a ducted fan into this :)

@bavarian_rc Год назад

Actually the kit comes with 3 options: pure glider, motor (the setup I did) and a 30mm EDF. The only difference is the middle rib. Have a look at the website and check the pictures… there is also one of the EDF version: shop.vth.de/holzbausatz_puri-6211949/

@associatedblacksheepandmisfits 2 года назад

Awesome 👌

@bavarian_rc 2 года назад

Thanks ☺️

@associatedblacksheepandmisfits 2 года назад

@@bavarian_rc thank you for reminding me of diy planes rather than rtf.. the satisfaction is greater by far .However I believe I shall stick to tissue for covering,less plastics the better.

@bavarian_rc 2 года назад

Yes the build is really very rewarding. Covering with tissue is something I haven't done in a while. Not sure if I would try as our modern covering films are working so well. And it is not too much plastic 😉

@associatedblacksheepandmisfits 2 года назад

@@bavarian_rc one can never have too little plastic ,but I understand its usefulness. Silk as an alternative perhaps for strength? We tend to use plastic for convenience too often nowadays.😔

@bavarian_rc 2 года назад

That's true

@alexkerr306 2 года назад

Nice..

@bavarian_rc 2 года назад

Thanks!

@alexkerr306 2 года назад

@@bavarian_rc welcome..

@chiparooo 2 месяца назад

Beautiful covering job! Thanks for sharing!

@bavarian_rc 2 месяца назад

Thanks, great that you liked it 🙌🏻

@มดแดง-ฃ3ข 2 года назад

คือเราจะทำทั้งทีจะเอาให้เหมือนคนอื่นได้ไง

@bavarian_rc 2 года назад

Tried it with google translate, but not sure what you are trying to say

@af0ulwind115 2 года назад

Time to build a ridable one where you stand in top...

@bavarian_rc 2 года назад

I like the picture that you just created in my mind. A bit like Paul Atreides in the the movie Dune (the first one from 1984) riding the sand worm 😂 Depending on your age you might know the movie.

@af0ulwind115 2 года назад

@@bavarian_rc oh I know it... And I think I know how to accomplish this picture... I just lack the proper tools and money to do it otherwise think 🤔 I have the skill, if I don't I am close to it. I've spent 20years in and out of personal vendettas to learn how things work and have delved all the way into the particle physics... Breaking down the known physics forces to one universal force that is viewed differently at different scales of size and magnitude yet still remain the same force... I Sooo want to tinker.

@bavarian_rc 2 года назад

That really sounds like someone ready to go for the big challenge. Good luck in achieving your goals!

@KnowerofThings 2 года назад

why make this political? im sick of this war. dont want to get reminded everywhere i look.

@bavarian_rc 2 года назад

Well then just pretend to yourself that it is a random choice of color. And don't forget, there are people that don't have a choice to forget the war, they are in the middle of it and fighting for their life and freedom. The freedom we have in our safe countries is a gift!

@TubeAngst 2 года назад

It's fun to see all the correct tools being used for each different procedure on a clean work surface in a calm manner. Pretty much the opposite of how I would do it. Thanks for the precise and entertaining video.

@bavarian_rc 2 года назад

Ha ha! Doing a build video is the best way for me to force me working in a very clean way. Any build where the camera is not running looks totally different! 😂 great that you liked it!

@Transit67F2 8 месяцев назад

yeah take a bow for video work again, the pauses make it, even the soundtrack stayed unmuted :) I want your steel weights :) can I guess they are about 50x5x150 ?

@bavarian_rc 8 месяцев назад

Thanks again. Happy to see that you are not getting tired of watching my build videos. The steel bars are cut from a 1m long bar that I found in my local hardware store. The dimensions are 150mm length, 30mm width and 6mm thickness. Weight is around 215g. After cutting them to length I sanded them to have a smooth surface and then covered the bars with clear coat. They are super useful and I made some more in the meantime

@free-birdrocker8809 2 года назад

That was an enjoyable build. Looks like you have the skills, now I would like to see the little guys rip through the air. Bravo! Great Job!🤠

@bavarian_rc 2 года назад

I had the maiden flight today. That wing really rips! I tried to shoot some video footage but due to it‘s small size it will be hard making a good flight video. Onboard video like on my other flight videos will also be difficult because of the extra weight… we‘ll see.

@free-birdrocker8809 2 года назад

@@bavarian_rc Awesome! I'll tune in for the next video. I figured that the little guy would be fast. 🤠

@bavarian_rc 2 года назад

Amazingly fast for the light weight motor setup.

@ВоваИванов-г5с 2 года назад

@@bavarian_rc говно лучше супру f3j сделай

@GregBabineau 2 года назад

Beautiful build and phenomenal video production! I learned a ton watching this.

@bavarian_rc 2 года назад

Hey Greg thanks a lot! Such comments mean a lot to me and it gives me a lot of motivation for making new videos.

@SH1974 2 года назад

Very interesting video and plane, respect! 19:40 finally I've found an RC nerd who knows how to solder connectors the right way! Congrats, You made my day!

@bavarian_rc 2 года назад

Thanks buddy! I have to say that I am much better in building planes than in soldering connectors 😂 But obviously I am improving!

@JanKowalskiOfficial 2 года назад

What is the wrong way? I can't imagine other way 😅

@SH1974 2 года назад

@@JanKowalskiOfficial no pre-tinning the connector or cable, too much heat to the cable (cable sucks solder, isolation shrinks backwards) , even "soldering" with a torch. I've seen many terrible things.

@JanKowalskiOfficial 2 года назад

@@SH1974 They surely have no idea how heat physics works in soldering😆

@SH1974 2 года назад

@@JanKowalskiOfficial I work in industrial electronics since 1991. The solder back then contained 40% lead and the flux in the wire was probaably not really positive for health - so I even learned breathing technique: breath slowly out (blow smoke away) when soldering. Once learned, I still do so.

@krist370 2 года назад

Nice build! For cutting holes in covering film use soldering iron with very thin tip. About 330° hot tip will cut like butter.

@bavarian_rc 2 года назад

Thanks! Next time I will use a soldering tip. Cutting with a knife was a bit awkward.

@TheRealPDaveTH Год назад

Great build what is your flat work surface you put on top of your bench made of?

@bavarian_rc Год назад

Thanks. That‘s a building board from Aeronaut: aero-naut.de/produkt/balsa-baubrett-400x1500x25/ It is made of balsa wood which makes it easy to apply needles to secure your parts where needed. It is build like plywood with multiple layers to ensure it stays absolutely even and flat.

@TheRealPDaveTH Год назад

@@bavarian_rc Ah that's very cool. thanks!

@EleanorPeterson 2 года назад

That's a very neat build; you work like a watchmaker! ⏲️👀 I'm interested in the wing's aerofoil section; there doesn't seem to be any 'reflex' of the trailing edge. Will raising the elevons a few degrees - combined with the swept-back design - have the same pitch- stabilising effect? I look forward to seeing the maiden flight. Good luck, and thank you for the video. 🙂

@bavarian_rc 2 года назад

Thanks a lot! The airfoil is a modified MH60. The reflex is very small. Today I had the maiden flight and it almost looped right after launch because I was giving it a bit more reflex than proposed in the build instructions. After dialing it back it flew like a charm. Shooting a flight video will be a challenge. This wing is so small!

@gforcefoamy Год назад

very nice build. i wish it could have a hinge and magnets so it could fold up easy to bring it along on a motorcycle ride! nice flying planes!

@bavarian_rc Год назад

Thanks. Great idea! The size would absolutely suit a transportation by motor cycle.

@greg0063 2 года назад

I learned some great building tips in here, someday I will get to a true blsa kit. Cute little wing, I like the verticals integrated into the elevons. I might use that design element one day.

@bavarian_rc 2 года назад

I did many balsa builds before but this one was the first one that is basically only consisting of ribs. Very light and quick to build. The design is by Tim Weißbach. He did many designs using similar techniques. Won‘t be my last one!

@mean78mashine Год назад

Respect... so nice to see someone who can build balsa with top quality results!!

@bavarian_rc Год назад

Thanks! I really enjoyed the build.

@anthonymaggiani Год назад

quelle est ce scotch ? what is this tape please ?

@bavarian_rc Год назад

Hi, I think you mean the tape for attaching the ailerons. It is normal Tesa clear tape, nothing special.

@AerialWaviator 2 года назад

Love the unique shape of this wing, kind of looks like a boomerang. The build process, with many build tips was educational. Great tips in the comments too. :)

@bavarian_rc 2 года назад

Thanks, great that you liked it!

@nickvledder 2 года назад

It flies way better than a boomerang!

@bavarian_rc 2 года назад

Confirmed! I had the maiden flight yesterday and it flies like a charm.

@AerialWaviator 2 года назад

Thanks. Awesome news. :)

@bavarian_rc 2 года назад

Also for me… it‘s always a relieve if a maiden goes well!

@K3Flyguy 2 года назад

Very enjoyable and well put together video, nice build, very clean and tidy! Can't wait to see her fly! I'm just guessing but the elevons appear large to me. It seems like they would have excellent control authority! Thank you so much for sharing your time and passion with us!

@bavarian_rc 2 года назад

Thanks a lot! I had the maiden flight today. Flies fantastic! I was also a bit afraid of the size of the ailerons. So I dialed the throw very low. Maybe too low… the roll rate was quite moderate. One thing surprised me, I was able to turn almost on the spot. Putting together a flight video will be a challenge. This wing is so small!

@K3Flyguy 2 года назад

Awesome you got to get up in the air! Im really looking forward to watching her flight characteristics! Again, very nicely done!

@bavarian_rc 2 года назад

I will try to shoot some more footage next weekend!

@christer8964 2 года назад

I have only used wood-glue for balsa models and epoxy for critical parts. What type of glue are you using, that seems to penetrate into the balsa?

@bavarian_rc 2 года назад

For a normal balsa build I still use wood glue and sometimes epoxy… things have not changed so much 😜 Nevertheless the design of the Puri allows to easily and quickly build it using CA glue (Sekundenkleber). It penetrates into the balsa … which is good and bad. Good: it’s a strong joint. Bad: the balsa wood gets quite hard in this area which it not so nice if you have sand it.

@christer8964 2 года назад

@@bavarian_rc I recently bought a lot of balsa planes from a sale-out in USA. CA-glue will save me a lot of building time compare to traditional wood-glue. Strange that I never even had the thought to test it before.

@bavarian_rc 2 года назад

CA can make a build quite fast. Test it!

@christer8964 2 года назад

@@bavarian_rc I will

@maflyer1 Год назад

Very nice build! Why not use the hot soldering iron to shrink tubing instead of a flame?

@bavarian_rc Год назад

Thanks! That would work as well… but a flame looks better on RU-vid 😜 No seriously, I don‘t like the traces the shrinking tube leaves on the soldering iron.

@MasboyRC 2 года назад

Great job, this is awesome 👌

@bavarian_rc 2 года назад

Thanks a lot!

@MasboyRC 2 года назад

@@bavarian_rc my pleasure 😊

@phmiii 2 года назад

You are a very talented builder! Keep up the wonderful work.

@bavarian_rc 2 года назад

Thanks a lot! Comments like yours really push my motivation to the next level.

@g.i.x-faktor4846 Год назад

Hallo, Heißsiegelkleber ist angekommen. Frage: soll ich auch die großen Flächen damit behandeln ?, oder nur die Rippen und Leisten ?

@bavarian_rc Год назад

Auch auf großen Flächen verbessert der Kleber die Haftung enorm. Damit kriegst Du später weniger Ablösungen. Ist aber halt etwas mehr Gewicht. Daher würde ich in der Fläche den Kleber etwas stärker verdünnt auftragen. Bei meinem Triple Neo hab ich alle Flächen eingestrichen die mit der Folie in Kontakt sind. Beim Puri gibt’s eh keine nennenswerten Flächen.

@g.i.x-faktor4846 Год назад

@@bavarian_rc Danke wieder für deine Antwort. Ich hatte mir den "Dizzybird 2.0" geholt, danach sah ich erst dein Video. Der Dizzybird hat Winglets, aber die werd ich jetzt auch mit Heißsiegelkleber bestreichen. Ach ja, da fällt mir noch etwas ein. Frage: Winglets werden aufgeklebt, die werden daher an der Fläche einen leichten Bogen machen. Soll ich die Winglets, Holz auf Holz, an die Flächen kleben und danach folieren ?, oder zuerst alles folieren und dann die folierten Winglets an die folierten Flächen kleben ?

@bavarian_rc Год назад

Hi, ich würde zuerst folieren und dann im Bereich der Klebestelle die Folie mit einem scharfen Messer sauber wieder wegschneiden. Niemals Folie auf Folie kleben, das hält nicht. Da gibt das schwächste Element nach und das ist der Kleber der Folie trotz zusätzlichem Heißsiegelkleber.

@g.i.x-faktor4846 Год назад

@@bavarian_rc Danke dir für so viele gute Tipps.✌

@bavarian_rc Год назад

Jederzeit gerne 😃

@davidwatkin1484 2 года назад

Thanks, interesting build. I learnt from you. Subscribed.

@bavarian_rc 2 года назад

Thanks a lot and especially for subscribing!

@raccx2614 Год назад

y no vuela?

@bavarian_rc Год назад

Oh yes it does fly. The flight video is in progress, stay tuned!

@xptical 2 года назад

Can't wait to see it fly!

@bavarian_rc 2 года назад

Me too… waiting for better weather

@florianricker1633 2 года назад

sehr schöner wing, ich überlege ob ich ihn mir als FPV wing baue, würde er zusätzliche 50 bis 60g verkraften?

@bavarian_rc 2 года назад

Bin mir nicht sicher wie er mit zusätzlich 50-60g fliegt. Bei so einem kleinen Leichtgewicht ist das ne Menge. Versuch wär‘s aber wert. Hatte heute den Erstflug. Geht wirklich sehr gut!

@dmytrobanovski4136 2 года назад

Thanks a lot. There is not available rc hobby during the war in Ukraine. Thank you for blue-yellow colors. We appreciate this, and we will join your family of hobby. Thanks

@bavarian_rc 2 года назад

Just a small sign of solidarity from the RC community ☮️ Stay strong!

@raZZkataeV 2 года назад

Кто о чем, вшивый о бане

@bavarian_rc 2 года назад

@Евгений Раскатаев Sorry, Google doesn't really translate this into something understandable

@petronioaznar 2 года назад

The name Puri is a bad commercial choice for Spain... Great build and looks awesome!

@bavarian_rc 2 года назад

Thanks and sorry for the name… it was not my choice 😂 I think the designer was thinking about the „pure fun“ you can have when flying it.

@petronioaznar 2 года назад

@@bavarian_rc yeah yeah I know its not your product..I was just saying 😉 Puri is like the typical aged housewife doing stuff for this husband, its like calling a wing Karen, thats why I mentioned it. Look forwars to the maiden!

@bavarian_rc 2 года назад

Ha ha, now I perfectly understand 👍😂

@blackwater7183 Год назад

Still waiting for the next video...can't wait to see it fly.

@bavarian_rc Год назад

Currently charging my batteries to go flying and shoot some more footage of my little Puri.

@danfosgett5154 2 года назад

The BROTHER ScanNCut SDX1000 is great. I have the Cricut and the Software doesn't have scale. Showing how to use tape to get the patterned just right was awesome! Thanks

@bavarian_rc 2 года назад

Yes I love this machine. With every project I learn more about how to use it. Even with the tape as a reference I am always afraid to mess it up the last moment and then having to scrape it off again. I have seen some videos where people use water with a tiny bit of soap to allow the vinyl to be properly adjusted. Have to try that next time.

@danfosgett5154 2 года назад

@@bavarian_rc I use to install vinyl stickers on vehicles. the soapy water is the way to go. move it around until you like it then squeegee the water out and it is perfect!

@bavarian_rc 2 года назад

Thanks, will definitely try that next time!

@Fl0W4RHI3R 2 года назад

Wow, du erfüllst perfekt das Klischee wie komisch es sich anhört wenn wir Bayern Englisch sprechen. :D

@bavarian_rc 2 года назад

🤣 Bavarian native speaker 🤣

@W_I_kanjilo766 2 года назад

Saya suka dengan cara anda 🤗membuat.. 👍👍👍👍🙏

@bavarian_rc 2 года назад

Thanks a lot! But I have to admit that in reality I am a little bit slower 😂

@alpha_pixel_ 2 года назад

What kind of sheet is that.. blue and yellow

@bavarian_rc 2 года назад

That’s ORALIGHT covering film from Oracover. You can check the video description for more details.

@rogerwest3278 2 года назад

Can this be built as a slope glider?

@bavarian_rc 2 года назад

Yes absolutely! There are 3 different middle ribs: one for a pusher motor (my configuration), one for a small EDF and one for a slope glider. You can reconfigure it just by swapping the middle rib.

@javilarg 2 года назад

Se llama Puri, como mi prima Purificación 😂😂😂

@bavarian_rc 2 года назад

Not sure the designer of the plane was thinking about your cousin when coming up with this name 😃 Greetings to your cousin… she can fly now 😜

@chrismofer 2 года назад

fantastic build & video :)

@bavarian_rc 2 года назад

Thanks so much!

@ludwig2345 2 года назад

Ah yes, the Amazon drone hub

@bavarian_rc 2 года назад

🤣🤣🤣

@Tallguysrc 2 года назад

What a beauty

@bavarian_rc 2 года назад

Thanks! I love the shape! Today it has to demonstrate that it can fly as well… maiden flight today!

@peter6501 2 года назад

Artwork

@bavarian_rc 2 года назад

Thanks!

@M5guitar1 2 года назад

Now I want to build one.

@bavarian_rc 2 года назад

Go for it! It is a quick build and it flies great.

@redisgonenowitsgray 2 года назад

Nice build video Bavarian.

@bavarian_rc 2 года назад

Thanks buddy!

@fernandopaivacmte.mamute9922 Год назад

Thanks, well done.

@bavarian_rc Год назад

Thanks, great that you liked it!

@SharneAndrews 2 года назад

Great build

@bavarian_rc 2 года назад

Thanks!

@air-headedaviator1805 2 года назад

What a cleverly compact build

@bavarian_rc 2 года назад

I was looking for a compact sub 250g build. With its unique shape it immediately caught me!

@RcAircraft 2 года назад

Nice 👍

@bavarian_rc 2 года назад

Thanks a lot!

@juebest 2 года назад

Klasse gemacht, super Video, toller Flieger 👍👍

@bavarian_rc 2 года назад

Danke, freut mich dass es Dir gefallen hat 😃

@g.i.x-faktor4846 Год назад

Hi Bavarian. Ich habe jetzt nochmal dein Video angeschaut. Thema: "Bügeln". Und ja, ich habe jetzt gesehen, warum sich bei meinem Flieger die Tragfläche verzogen hat. Danke nochmal vielmals für dein Video. Wer aufmerksam hinschaut, kann viel lernen. :) (P.S.: ich hab eben wieder Worte vom englische ins deutsche dolmetschen lassen, von Google, und es war hilfreich)

@bavarian_rc Год назад

Au weia! Das ist ärgerlich wenn die Tragfläche sich verzieht. Ist es noch im Rahmen oder musst Du die Folie wieder runtermachen? Wenn ich mal viel Zeit habe, dann mache ich 'ne richtige deutsche Untertitel-Version. Manchmal übersetzt Google nämlich ein wenig seltsam 😀

@g.i.x-faktor4846 Год назад

@@bavarian_rc Ich wollte die Tragflächen mit gelb und rot bügeln. Zuerst mit rot. Rot nur als Unterbrechung. Voll verzogen. Hab´s abgezogen, Tragfläche gesäubert und mit Heißsiegelkleber eingestrichen. Nach dem dritten Versuch hab ich mich entschlossen, die Tragflächen komplett in gelb zu bügeln. Doch zuerst die Oberseite, damit ich die Öffnungen für die Ruderhörner einschneiden konnte. Dann die Servo´s eingeklebt. Unterwegs ging die Folie alle. Hab neue bestellt. Ich hoffe die kommt Montag. Foliere also erstmal die Winglets. Habe alle Arbeiten fotografiert. Gut finde ich, daß ich viel Praxiserfahrungen sammeln durfte. Die Angst was falsch zu machen, oder das Modell zu zerstören, haben sich somit minimiert. Daumen hoch.

@bavarian_rc Год назад

Hi, das klingt erst mal ziemlich übel und ich kann mir vorstellen, wie Du Dich geärgert hast. Aber mit jeden Problem und jedem Fehlschlag lernt man dazu. Ich verrate Dir was: Was bei meinem Puri Video so spielerisch einfach aussieht, täuscht darüber hinweg, dass ich hier auch bei einer Fläche die Folie nochmal runtermachen und neu beginnen musste. Bei mir war's nicht der Verzug sondern dadurch, dass ich die weiße Folie zunächst nicht um die Hinterkante rumgeschlagen hatte, hat's mir die Folie beim Schrumpfen und Spannen so weit von der Hinterkante weggezogen, dass das Holz wieder sichtbar wurde und die Spannung war natürlich weg.... wieder was gelernt. Das gleiche ist wichtig wenn man, wie Du beschreibst, farbliche Unterbrechungen reinbringt. Die Folie muss an den Rändern noch genügend Halt haben, damit sie sich spannen lässt. Die Stirnseite einer Rippe ist da zu wenig. Also immer um eine Kante rumziehen (sieht man in meinem Video auch bei den gelben Oberseiten. Weiterhin viel Erfolg!!!

@g.i.x-faktor4846 Год назад

@@bavarian_rc Genau das habe ich auch erlebt, so daß das Holz wieder zu sehen war. Habe dann eine schmale Folie drüberfoliert, damit beide Tragflächenfolien halten. Das mit der Kante war auch interessant, an den Winglets, da gibt es nämlich keine. Ich mußte die Tragflächen und die Winglets miteinander verkleben, um an der Nasenleiste, wo es nicht dicht war, mit Balsaholzreste auffüllen und abschleifen, so daß es auch gut aussieht und funktioniert. Ich bin eher Pilot, als Bauer, doch durch dieses Modell "Dizzybird 2.0" lerne ich viel, auch für die nächsten Modelle. Auf jeden Fall ist es ein Selbststudium, wo etwas Lehrgeld draufgeht. Aber unser Austausch bringt mich auch weiter. Ach ja, ich ärgere mich nur sehr kurz, lerne sofort daraus und schaue nach Lösungen. Ich wünsche noch nen schönen Sonntag.

@bavarian_rc Год назад

Das gute ist wenn man schon seine Erfahrungen gemacht hat, dann überlegt man sich beim nächsten Design was sich gut umsetzen lässt und was nicht. Bin gerade an dem Punkt das Design für meinen nächsten Flieger zu erstellen. Muss dabei doch immer wieder meine Kreativität einbremsen und wieder in Richtung Machbarkeit lenken 😜 Wünsche Dir einen guten Wochenstart!

@fatsharkkhvicha 2 года назад

super

@bavarian_rc 2 года назад

Thanks!

@peterweller8583 2 года назад

relaxing video

@bavarian_rc 2 года назад

Thanks!

@astra_joe Год назад

Nice 😁👌

@bavarian_rc Год назад

Thanks a lot!

@mhkm7655 Год назад

Is rcglider several grams?

@bavarian_rc Год назад

Not sure to catch your question correctly. You can fly it in my setup which weighs 130 grams. In a pure glider setup you could expect around 100 grams

@mhkm7655 Год назад

@@bavarian_rc The RC gliders which are less than 100 g in Japan are popular.

@mhkm7655 Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HMNjIM58AO4.html

@bavarian_rc Год назад

So this one would definitely fit! Is the sub 100grams linked to your local regulation? In Germany we have a sub 250 gram regulation, where you have almost no restrictions.

@bavarian_rc Год назад

@@mhkm7655 those little sub 100 gram planes are really nice. Great location!

@nevillecreativitymentor 2 года назад

What a beauty

@bavarian_rc 2 года назад

Thanks a lot!

@SladkaPritomnost 2 года назад

Neat design.

@bavarian_rc 2 года назад

Yes a real little cutie. Had the maiden flight yesterday and I have to say it flies great! Big shout out to the designer of the kit, he did a great job!

@BOB58046 2 года назад

What kind of plastic is this? how does it stick to the tree?

@bavarian_rc 2 года назад

I think you speak about the covering film? It is Oracover covering film. It has a hotmelt glue on one side that is activated by the heat of the iron. It is the best cover film I have used so far.

@BOB58046 2 года назад

@@bavarian_rc Thanks for the information, now it remains to find such material.

@bavarian_rc 2 года назад

Good luck!

@BOB58046 2 года назад

@@bavarian_rc I found everything. Thank you. 1 question is there a coating on the iron so that the plastic does not stick?

@bavarian_rc 2 года назад

Yes the iron has a kind of teflon coating. A normal iron can also be used if you wrap a thin layer of cotton around the iron.

@ioannisbatas1614 2 года назад

Superb !!!

@bavarian_rc 2 года назад

Thanks 😊

@benchamp6793 Год назад

Видео отличное,просто образцовое!

@bavarian_rc Год назад

Большое спасибо! Thanks a lot, I am happy that you liked it.

@burtisaac1000 2 года назад

Excellent ❤! Salud 🥂!

@bavarian_rc 2 года назад

Thanks a lot!

@did3d523 Год назад

trash after 1st crash

@bavarian_rc Год назад

I guess you haven't started the hobby back in the 1980's where crashing and repairing your balsa plane was something normal... But honestly: 1. Don't crash! 2. Balsa planes are quite easy to repair... unlike the pile of chips from a crashed 3D printed plane.

@did3d523 Год назад

@@bavarian_rc you guess bad , i'm 52 old begin with balsa and gaz motor

@bavarian_rc Год назад

Oops, I have rarely been so wrong. Sorry! We‘re about the same age then. So far I only had one bad launch directly into the ground with no damage at all. The low mass of 135 grams is helping to prevent too much damage. Cheers!

@magnuslouk9085 Год назад

🙂 ρгό𝔪σŞｍ

@bavarian_rc Год назад

Hmmm, google translate is having a hard time translating your comment.

@jorgelbotelho8363 Год назад

Magnífico parabéns

@bavarian_rc Год назад

Thanks a lot!

@g.i.x-faktor4846 2 года назад

Frage: Wozu brauch ich den "oracover Heißsiegelkleber" ? Klebt die Folie nicht durch´s bügeln, alleine ?

@bavarian_rc 2 года назад

Hi, die Folie klebt auch alleine durch‘s bügeln. Dabei haftet sie aber nur mit der obersten Schicht Balsa. Bei Belastung kann es nun sein dass sich diese oberste Schicht Balsa ablöst und schon ist die Folie lose… da hilft auch kein nachbügeln mehr. Der Heißsiegelkleber dringt dagegen etwas ins Holz ein und es entsteht dadurch eine tiefere Verbindung. Der weitere Vorteil ist dass die Haftung deutlich besser ist als ohne und das ist speziell bei geringer Auflagefläche wie hier bei den dünnen Rippen ein Vorteil. Ich hab bisher recht gute Erfahrung damit gemacht auch wenn die Verarbeitung recht unangenehm ist aufgrund des starken Lösungsmittelgeruchs. Im Innenraum unbedingt auf gute Belüftung achten. Ich nehme immer zusätzlich eine Maske mit Aktivkohlefilter. Wenn man auf‘s Gewicht achten will einfach etwas verdünnen.

@g.i.x-faktor4846 2 года назад

@@bavarian_rc Dankeschön für das ausführliche Feedback. Ich werd mir dann so´n Kleber besorgen, um das Modell zu Folieren. Danke nochmals. :)

@bavarian_rc 2 года назад

Viel Erfolg beim Bügeln! Meine Frau ist immer ganz fasziniert wenn sie mich mit Bügeleisen sieht 😂

@g.i.x-faktor4846 2 года назад

@@bavarian_rc Mit dem bügeln wird´s sone Sache, da ich es zum ersten mal mache. Ich werd erstmal testen, mit wieviel Temperatur es gut klappt. Ich bin gespannt.🧐

@bavarian_rc 2 года назад

Das wichtigste ist die Temperatur. Zum ersten anbügeln relativ niedrig. Ich nehm da rund 90 Grad. Um die Kanten gehe ich dann etwas höher, so auf 130 Grad. Zum spannen dann noch ein bisschen mehr. Hängt aber immer von der Folie ab. Bei Oracover passen die Werte recht gut. Oracover hat auch eine gute Anleitung auf der Homepage. Unbedingt anschauen!