PushMowerRepair.com - Briggs 3.5HP Adjusting Governor to Change Rpm

Подписаться 10 тыс.

Просмотров 206 тыс.

50% 1

This video Demonstrates how to Adjust the Governor in a Briggs and Stratton Lawn Mower it is similar across 3-6hp Models, Click Below For More Information
Visit our site for more tutorials, Parts and lawn mowers for sale, servicing available!
www.pushmowerrepair.com/
Like Us On Facebook! To take advantage of specials and discounts / pushmowerrepair
All our content is offered free of charge however we have had a number of people interested in giving small donations as a token of appreciation for the time and money saved by learning how to repair there equipment themselves. If you are interested in making a donation it can be done here: www.paypal.com/cgi-bin/webscr...
Any donation is greatly appreciated. Thank you & good luck with your repairs

Хобби

Опубликовано:

2 июн 2013

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 48

@cebarillas Месяц назад

Thank you! You helped me fix a lawnmower I found on the curb two weekends ago. Adjusting the governor spring took less than a second, and now it starts up without any problems! Hope you're having a great summer!

@TheGarageGamer86 2 года назад

Thanks so much dude, I have seen about 4 or 5 of these videos talking about the springs. But nobody explained the governor was air operated and how it worked, with your video I found and fixed my problem in like 2 minutes. (Piece of metal was blocking the governor plastic piece from fully moving).

@robosborne5489 Год назад

Masport and Briggs and Stratton , a great Kiwi -American combination. My Masport 375 Sprint is 25 years old and still going strong . Awesome clip indeed !!

@leastofthese2684 8 лет назад

You are the only who addressed the issue that I am having with my Briggs and Stratton quattro lawn mower the way I needed it, and you gave the visuals in such a way that even a novice such as myself could understand it. Thank you bunches!!

@davidbennett1316 3 года назад

I had this problem after changing ignition coil/magneto - I got the wrong one and it was too big so fouling the regulator vane and preventing it moving all the way - hence very high revs thanks for posting - veery helpful

@robbyjones7631 6 лет назад

Replace the governor spring before adjusting the tang. Get the OEM spring. Make sure the intake gasket isn't leaking. Put your hand some over the carburetor and see if it slows. Check if the throttle is sticking in it's bore. They do on these carbs.

@Altairw 10 лет назад

Thanks for the video, I fixed my lawnmower!

@micklavo9204 10 лет назад

I like this video .This help me solving the problem. Thank you very much!

@Jim.456 4 года назад

Yep, it was my spring. Thanks for the video. It helped

@boodlewoodle 10 лет назад

Thanks that solved my problem, happy mowing guys

@lorilee4709 4 года назад

still a very good tip working with the governor

@miguelaguilera2983 4 года назад

Many thanks, needed these very specific instructions!

@rickalbon9744 8 лет назад

Thanks very much for your very helpful demonstration. Good on you mate.

@rickalbon9744 8 лет назад

Although lawnmowers still annoy the s**t out of me. Especially on a Sunday morning+pantheist spinoza

@scorpiouk5914 9 лет назад

Ah, the Governor! I had no idea. A friend taught me how to rebuild the carb and the last time I did it, it was over-revving just like this mower. I thought I had messed up the linage somehow, but it looked fine. Last week, the vibration caused the blade to drop right off the mower. No worries, I heard the clanking and stopped the mower before it could "throw it", it just dropped right on the ground. I hope this is the problem, I really can't afford a new mower right now.

@notyaboymatty5907 2 месяца назад

Great vid but unfortunately unhelpful for mine my mower is similar but it only has the on governor spring not the 2 and it dosnt have that flap thing on the flywheel but still a great video clear and informative

@RussellBooth1977 4 года назад

The fan shroud must be installed for the governor to work properly if it's removed,it just saves anyone chasing their tail all day trying to figure the problem out if they have theirs removed !

@ns671fr 7 лет назад

my smaller spring is loose and my bigger spring is tight, how do I lower the speed, which tab I bend or do I need to address springs too

@bjtrees9040 8 лет назад

thanks mate

@853rudedogs2 2 года назад

I don't understand how it work, but she now works

@JeffreyStrader 7 лет назад

That governor spring was shot dude!.............Why didn't you put a new one on it???

@Maxpower-lg3ju 4 года назад

Just replaced the Governor Springs so easy

@Home_made_ch 8 лет назад

Thanks for video. However from my experience can say that bending metal is not good idea.You are changing distance between flap and that metal, that is made by manufacturer. When you buying new governor spring set, there shown which model to fit that set. same thing with stretching or bending springs. adjust rews always possible with mowing handle, but will get problem with engine rews under pressure, when getting to cut different hight grass.But governor working principe is correct

@dwayner2518 8 лет назад

Thanks for the vid, I followed your steps to adjust as it was revving high & had no rev range just fast & off but it made no change until I released some tension on the small spring a bit of testing gave me the desired rev range. I was wondering though since you bent the tab away from the governor wouldn't that apply excess tension on the governor not allowing to fluctuate?

@Pushmowerrepair 8 лет назад

+Dwayne Rothe bending the tab is not always needed, on some machines different springs have been used and the tab can interfere, however if it is not causing any problems a little bit of adjustment on the springs will usually solve any problems.

@dwayner2518 8 лет назад

+PushMowerRepair.com Thanks, my 86 YO neighbour is thrilled to have it working again, I overhauled the carby, reset magneto gap & replaced o-rings & gaskets but was unsure on the governor springs settings, your vid really helped me out, thanks again for taking the time to post it

@unknownhidden1746 6 лет назад

Can somebody please help me on this , I have the governor pulled the full way back but I dont have any wires connected and the engine is screaming at full throttle even tho the governor/throttle is pull the full way back , any help would be appreciated

@roonzacar7276 8 лет назад

Are there always 2 springs? My Rover Wayfarer with a Quattro engine is over revving and running very loud. Took the filter off and the smaller spring is there with not much tension but the big spring is not there and I can't remember whether it was there before. I did fiddle with the valves and since then I've had this over revving issue.

@Pushmowerrepair 8 лет назад

There is not always 2 springs, It is best to run the mower without the air filter while adjusting so you can see that action of the throttle and springs, It is safe to do so in a clean dust free environment for short periods of time.

@unknownhidden1746 7 лет назад

PushMowerRepair.com fnaguitarplayer9 hello mate wondering could you help me with a problem I seem to have with my Briggs and Stratton lawn more engine , The. Lawn more is revving high . I took off the air filter and all the throttle cables is cut off so it's only the governor is out the side I have it pulled the hole way back and it still revs high is there anyway on earth I can fix it thanks .

@Countdown70s 7 лет назад

I don't know what you have, but the older model B&S engines with die-cast carbs but still with carb on tank, often only had the larger spring, and it is a different appearance spring, without a long arm at one end like Sprints/450 series etc..

@suzieq8379 4 года назад

mine is behind the flywheel im not sure what to do my is revving up bad got to be the spring in front like your spring i don;t know whether to tighten it or loosen it

@jasemark4885 10 лет назад

hey i just fixed up my dads mower , however when i put it back together and started the mower it revs at full throttle. so i played around with linkage springs now it runs perfect idle and good rev but only whilst the air filter is off once i screw it on and start it the revs stay high again. any ideas.

@Pushmowerrepair 10 лет назад

Hi Sometimes when the air filter is put back in place the linkage springs can get caught or be obstructed this is most often the cause of the problem you describe, the easiest way to check/resolve this is to carefully put the air filter on while the mower is running and try to see what changes.

@peterwood-jenkins3634 6 лет назад

Take it to a garage would be the best idea it needs pro advice not chancers

@Countdown70s 7 лет назад

One 3.5 I'm working on currently although VERY easy starter, seems to have anaemic throttle response,especially compared to the 2 Victa with "450-series" Briggs I also have, and I'm wondering if low spring tension of this spring is a likely cause...OTOH, it is possible to run this mower at a very low idle b4 kill switch kicks in, compared to the other two.

@Pushmowerrepair 7 лет назад

The slow throttle response could be related to the slower idle then the other mowers, a higher tension spring would likely speed up the idle and throttle response.

@Countdown70s 7 лет назад

t/y..

@alexarks517 8 лет назад

You bent the wrong metal tab. If you bend the tab that the larger spring connects to in or out it will change the rpm. No need to bend the spring like that.