No video :(

Put A Cork In It With Your WAZER Waterjet

Подписаться 133 тыс.

Просмотров 14 тыс.

50% 1

Cutting out the cork gaskets for the sight glasses on Pearl with my WAZER water jetting machine. WAZER sponsored some of my purchase price and I'm sharing how I use it in the shop, on real projects at hand with you.
Wazer's website : www.wazer.com
Link to The Peel 2 3D Scanner: ultimate3dprin...
Link to all Peel 3d Scanners: ultimate3dprin...
Link to American Rotary: www.americanro...
Hot Sot Ovens: barzindustrial...
www.americanro...
Wazer's website : www.wazer.com
Link to The Peel 2 3D Scanner: ultimate3dprin...
Link to all Peel 3d Scanners: ultimate3dprin...
Link to American Rotary: www.americanro...
Hot Sot Ovens: barzindustrial...
www.americanro...

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 41

@guubagaaba8391 Год назад

been watching you for almost ten years , still amazed at the things you do !!!!!!!!! that machine is kick ass !!!!!!!!!!!!!!!!!!!

@lodgecav490 Год назад

I condensed this video into 3 minutes. I don’t think I missed anything😊

@Daniel_cheems Год назад

Welcome back Keith. It's good to see you again!

@henrikskott Год назад

I find it fascinating that you find the sound of steppers soothing. To me they sound slightly angry, but then I work with computers and just register the 'digital' part of the noise. I am planning to install a stepper to drive the lead screw on my lathe though, maybe the sound of them will grow on me after a few years :)

@stuartlockwood9645 Год назад

Hi Keith and Lisa 😊 glad you had a good holiday, the Wazer is an interesting machine, and very useful for the shop. Thanks for another interesting video mate, stay safe, best wishe's to you and Lisa 😊 Stuart UK.

@michaelweatherhead9470 Год назад

Thanks Keith 👍 great video of the Wazzer take care of yourself.

@phillipjones3342 Год назад

Truly amazing well done sir learning the technology and materials will help with the farm fit and function

@patricksilvestri2276 Год назад

Awesome video Keith every time I had to cut out a court gasket I had to use an exacto knife so now I'll have to get a wazer

@bulletproofpepper2 Год назад

Very kool process, thanks for sharing !

@bcbloc02 Год назад

Very cool!

@iandibley8032 Год назад

The Wazer unit is a very handy unit, $12,000 in Oz due to the difference in $ exchange rate. Was the cork natural or rubberised cork I have found rubberised cork is best less wicking, it does looked rubberised. Great Lisa & you getting away ,come back refreshed again ready to machine big pieces of steel into little bits😀

@KeithFenner Год назад

Yes, better chemical and heat when rubber base cork.

@lecnac855 Год назад

Excellent. Nuff said sir Michael Angelo

@charlottewilcox4406 Год назад

Keith, check out flush cut diagnol cutters at Mcmaster, two sizes, for plastic sprues, not to be used on any metal.

@RandallMoore1955 Год назад

Keith is one of my favorites , Why? I see the Flag, The kids saying the pledge of allegiance, A fine looking Harley, And last but not least a great man that iam proud to call my friend, Keith Fenner.

@fredcreer1929 Год назад

The perceived decrease in cutting speed took me by surprise.

@ÁREAJ27 Год назад

Olá amigo Keith!!! Muito bom trabalho, e como sempre é uma satisfação em ver seus trabalhos!!! Boa sorte sempre com muita saúde e paz!!!

@ohhpaul7364 Год назад

Keith, you have been very thorough with what you have shown of the machine so far. I wonder if you can notch tubing in it like the laser tubing cutters can do? Then that makes me curious if you could make some kind of knurling pattern nobody has ever seen before with one, like for instance, engine turning knurling. Sometimes I have weird questions. Hope y'all are doing well and enjoyed your vacation. Thanks for the videos.

@KeithFenner Год назад

Just flat laying materials

@jamesworsham125 Год назад

Go to any hobby shop and you can buy a spru cutter. Got for plastic and other softer material

@ronalddavis Год назад

oil pan gaskets used to be cork or still are. at 62 i would rather take an a.. whoopin than crawl under a car

@rl3898 Год назад

You don't know how lucky you are that the software recognises where to turn the water on and off. Twenty years ago I was using a 56000psi machine and you did the drawing in Autocad then loaded it into the machine and had to go through line by line writing pause, water on, water off in order to go from a cut to the next cut.

@PhilG999 Год назад

I guess I'm missing something here. Why not just replace the cork gaskets with Viton O-rings? Waldes is one manufacturer I've dealt with years ago. Their "O-Packs" come in every size my customers ever needed. Measure I.D. O.D. and thickness and you're done. Or is it just the challenge of making them? I can dig that! 😁

@georgeescaped6035 Год назад

you would think you could cut the cork by water pressure alone with no grit, as any grit stuck in the cork maybe leach out into the gear oil, which is not a good idea

@DrewDiaz Год назад

So I’m thinking, which is painful, these are gaskets for oil level sight glasses and there is grit imbedded in the cork? Grit that cuts metal?

@KeithFenner Год назад

LOL I was concerned about that, but after having cut the test pieces and also dealing with the pink garnet material, I see no evidence of garnet embedded into the cork material. Elastic type materials seems to bounce off just like rubber sheeting.

@rl3898 Год назад

A valid point, that garnet dust gets everywhere.

@tmptorneria1818 Год назад

Hola keith como estas yo aca con problemas en mi torno tengo un desgaste en bancada. Y no le encuentro la manera como me gustaria si podes que me agas una llamada i lo mires gracias amigo

@TERRYB0688 Год назад

Keith, would be interested to know that the base material is on the Wazer ie the fixing bed and why it doesn’t get distroyed

@KeithFenner Год назад

It does get destroyed eventually, and I just flipped it for the first time. It is a plastic extruded type shape.

@johnwallace9002 Год назад

Have you cut glass yet???

@michaelboyle1983 Год назад

I think a wittle Wazering goes a wong way. Oops, I mean a little Wazering goes a long way. I think it's pretty boring to watch for very long. On a more positive note. Does the cork get impregnated with the media? Can you lower the water level so the bubbles don't move the thin cork all around? Thanks for showing us what you do. God bless you!