QUAD CORTEX | SPLITTERS & MIXERS EXPLAINED

Подписаться 1,9 тыс.

Просмотров 18 тыс.

50% 1

The splitter and mixer function on the Quad Cortex is super useful in adding to presets and sending certain parts of your signal to different effects and outputs. In this video, I explain (in layman's terms) the different parameters of the splitter and mixer function and how they interact with the signal and outputs.
Like this video?😁 Subscribe for more great content!✅✅
Check me out other places!
www.dcfguitar.com
Instagram: / dustynfink
Twitter: / dustynfink
#guitar #howto #quadcortex

Видеоклипы

Опубликовано:

6 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 31

@andymeyer413 7 месяцев назад

Great explanations! I hadn't even thought of this until I watched your video, however once upon a time, I used to biamp my bass. I am going to try it out to see how it sounds with the crossover. Thank you!!!

@detlord86 2 месяца назад

Vary cool mate, thanks for that!

@luenmutebassist6735 Год назад

Thx for this! I was a bit confused from the other video but you explained plain and simple👏👏👏

@DCFGuitar Год назад

Glad it helped!

@Dan_XF07 Год назад

Dude.. your explanation was fantastic! Thank you very much! Taking advantage of this, I would like to ask you, if possible, for you to make a video with the QC, showing some beautiful tones that we can extract from it to the sound of a tele and a stratocaster! Clean sounds.. crunch.. would be really good! I subscribed to the channel! Cheers!

@DCFGuitar Год назад

Sure I can put something like that together no problem. Cheers!

@dondyledan7024 Год назад

great info

@DCFGuitar Год назад

Glad it was helpful!

@malborotre 10 месяцев назад

Bravissimo

@alvaradoalberto7 29 дней назад

Im trying to split the signals at the end of my chain to have a cab going left and the other one right, but I can’t seem to do so…

@floridafunandmore Год назад

Hey I like way you explain things, can you do a video on how to setup scenes with a clean amp on one button and dirty and solo on other buttons ?

@DCFGuitar Год назад

Sure I can put something together for that!

@floridafunandmore Год назад

@@DCFGuitar awesome thanks

@lucas_brg Год назад

Thanks for the video! One question, how to delete the splitter?

@DCFGuitar Год назад

Just remove all the blocks from the split path (Row B) and the splitter will disappear from the grid. Hope that helps!

@jamescoburn1496 14 дней назад

How do you delete a splitter path?

@quentincornet3024 Год назад

Hi ! In the 1st part of your video, how would you send your wet signal to your stage amplifier (without the cab block ofc) without duplicating the FX on the second row ? :) Thanks

@DCFGuitar Год назад

With CorOS 2.0, you can now globally bypass cabinets, IRs or Neural Captures. I will try to post a video that addresses your specific concern. I assume you still want to be able to send a cabinet to FOH but just bypass it for the output going to your amp?

@avilabautista 6 месяцев назад

@@DCFGuitardid you end up making this video? That's exactly what I need for my setup!

@smellytele9629 Год назад

I'm new to the QC, is this how you'd essentially run effects in parallel? I've been trying to find info on this. Can you run effects in parallel in the QC?

@DCFGuitar Год назад

You bet! You can adjust the mixer levels on the split to get the overall mix you want between the paralleled effects if that makes sense

@FStoppers 3 месяца назад

This seems like a silly question but how do you delete a splitter once you add it to the grid? -P

@DCFGuitar 3 месяца назад

Just remove/move all the blocks from the split row and it will disappear

@richard.ayudant 3 месяца назад

Hi. Great video! One quick question: I created a splitter/mixer path with a cab module and it works great. However, if I turn the cab module off (essentially, leaving an "empty" splitter line), there is a strange noise when I play the guitar. The noise disappears if I turn on any module on the splitter path. Is that normal behavior of the QC? Thanks!

@DCFGuitar 2 месяца назад

Not sure what you mean by strange noise, but it will typically sound bad if you don’t use a cab block with an amp block and are running it into an frfr or studio monitors

@richard.ayudant 2 месяца назад

@@DCFGuitar My issue is that I expected that if I disabled every module in the split path (the path in the second row, but without removing the path itself), the sound would come out as if no split path was ever added. But it turns out that that is not the case; the sound comes out "different" and I am not sure if that is normal behavior

@pascalmolenaar7636 9 месяцев назад

hi Dustyn do you know if it possible to split more channels. Let's say on lane one I have a clean amp lane 2 a drive and lane 3 a lead amp. I have a power amp that goes to my cab. The question now is: I want to split every lane so I can send them to output 1 that goes to my cab without the speakers sims that are on every lane. Is this possible?

@DCFGuitar 9 месяцев назад

Hey I shot a quick video, let me know if it achieves what you’re trying to do ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-vE0L4otdsAY.htmlsi=fXGrNBdUT5IPY-p0

@Nicolae8607 Год назад

I don't understand were I have to split to have to cabs..sorry I am bit confused. Thank you

@DCFGuitar Год назад

If you have your amp and cab 1 in row 1, the easiest way to do it is to put cab 2 in row 2 and put the split end of the splitter AFTER the amp, before cab 1. Send row 1 and 2 outputs to row 3 (long press the output block of the row and select send to row 3. Row 3 output goes to multi output or whatever outputs you want to route the signal to. Let me know if that helps