Queenbee CNC Upgrade - Cleaning Bearings

Подписаться 4,8 тыс.

Просмотров 13 тыс.

50% 1

Let's clean our balls. In preparation for the Queenbee linear rails upgrade lets get our linear rails and bearings in order.
A huge thank you to CNC3D for supplying me with the kit to do these videos.
Get your Queenbee upgrade here!
www.cnc3d.com....
Music Thanks to!
------------------------------
We Are Here by Declan DP / declandp
Licensing Agreement: declandp.info/m...
Free Download / Stream: bit.ly/_we-are...
Music promoted by Audio Library • We Are Here - Declan D...
------------------------------
Memories by MusicbyAden / musicbyaden
Creative Commons - Attribution-ShareAlike 3.0 Unported - CC BY-SA 3.0
Free Download / Stream: bit.ly/musicby...
Music promoted by Audio Library • Memories - MusicbyAden...
------------------------------
Feel Better by Roa Music / roa_music1031
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/feel-be...
Music promoted by Audio Library • Feel Better - Roa Musi...
------------------------------
Song: Erik Lund - Summertime (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: • Video
------------------------------

Опубликовано:

27 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 26

@YanouFishel 3 года назад

I mounted regular M4 grease nipples on my HGH15. Hiwin also mounts m3 mini-grease nipples on their mgn15 carriages, although they're very hard to find. Another option is use a syringe and apply it into the small hole in the dust cover (where'd you'd normally want to fit a grease fitting on those)

@ianm1470 3 года назад

Well ~ we all like clean balls

@zxxvcc 3 года назад

I'm trying this with the bearings and rails from the Bulk Man 3D Queenbee kit - after washing, the bearings are as sticky as your ones are before washing. I guess this means a bit more work for the motors but not a showstopper.

@NeoQJ 3 года назад

Thanks for the tutorial

@JustQiix 2 года назад

Thanks! Helped me alot

@MrNutmegdesigns Год назад

what happens if a ball pops out? wished I seen this video before building mine. I had two or three bearings go on to the rail hard.

@Icefox1986 Год назад

Hey mate, if I can’t get white lithium grease what is another alternative I live in New Zealand

@ralphietito Год назад

Great video. Thank you. The bearings fir my Queen Bee Pro came without the grease nipples and without a screw where the nipples go. Do you know where I can get the nipples?

@matteyles7466 3 года назад

Grate video, it helped a lot. How often should you apply grease if a CNC router is running about 2 hours a day?

@bmmcwhirt Год назад

Is there any reason this cannot be done using 99% IPA in an ultrasonic for 30min? I know most people don't have an ultrasonic but I do as I found it very useful for resin 3D prints. Should only need to loosen the ends and not remove them as well.

@IllDoItMyself Год назад

Yeah that would work just the same might need to move the balls a bit to clear inside still

@larryschmitt2513 3 года назад

What kind of grease gun and coupler do you use? And type of grease?

@IllDoItMyself 3 года назад

Sorry I will post link shortly!

@larryschmitt2513 3 года назад

@@IllDoItMyself thank you

@neurowocky4791 3 года назад

@@IllDoItMyself I look forward to you sharing this link as well thank you

@52thephotoshop 2 года назад

@@IllDoItMyself Any update on this? I can't work out what the correct gun type is

@thomassalin949 2 года назад

What is a good lubricant for these bearings?

@IllDoItMyself 2 года назад

I use white lithium grease.

@danmillier4204 3 года назад

you never shared the link to the grease amnd grease gun type

@IceTurf 3 года назад

Are those Hiwin or Chinesium linear rails?

@IllDoItMyself 3 года назад

Not hiwin no but I have been happy with the quality regardless.

@IceTurf 3 года назад

@@IllDoItMyself My real question with the Chinesium rails is longevity... They could start great and just go to crap in short order - i don't see a lot of projects with enough years on them for people to say "this is the life I got out of them"

@vasyapupken 3 года назад

@@IceTurf lifespan of bearings depends not only on it's build quality but also on how they are installed, used and maintained. cheap chinese products are most likely used by people who have zero experience in linear bearings. so this bearings are often installed wrong and/or have their size not compatible with the load (and used without any dust protection of course. even in this video rails are opened and have no dust caps of bolts). and on the other hand we have "everlasting" Hiwin/Bosch/THK/NSK/INA/IKO rails which usually used on proper machinery. installed on precision milled surface, supplied with automatic lubrication and covered from any dust.

@MrTWOproductions 2 года назад

i always thought that Hiwin was Chinese.

@IceTurf 2 года назад

@@MrTWOproductions HiWin are Taiwan, a quality brand. Many rails out of China can pretend to be HiWin, but aren't. Some Chinese rails could be of good quality, but it is hard to know.