QUICK and EASY Self Locking Tool Height Adjustment!

Подписаться 10 тыс.

Просмотров 32 тыс.

50% 1

Today I'll be making self locking height adjustment knobs for my Aloris style quick change tool holders.
This is a quick and easy project that I kind of wish that I'd done sooner.
I will be using 360 free machining brass to make beautiful adjustment knobs that look nicer, and work better than the typical jam nut style knobs that come on most tool holders.
Not only is this project relatively quick and easy, but it's a lot of fun too.
The project involves both the metal lathe and the milling machine, and I'll bounce back and forth between the 2 machines.
I'll start off on the lathe, where I'll turn down the stock before giving it a nice knurled texture using a scissor style knurling tool.
Then I'll drill and tap for the 3/8x24 tpi thread on the tool post.
Next, I will head over to the milling machine for some milling, drilling, tapping, and will even get to use the slitting saw.
Once I'm finished at the milling machine, it's back over to the lathe for finishing touches, and separating the parts from the stock using a high speed steel parting tool to perform the parting operations.
I really enjoy projects that make use of multiple machine tools, interesting work holding options, like v-blocks and machinist's jacks, and then produce an immediately useful tool at the end of the project.
The diversity of machining techniques and instant gratification in the result make these some of my favorite jobs in the hobby machine shop.
Who am I?
I'm a hobby machinist, with a passion for old machine tools and manual machining.
I am here to share and learn.
Being self taught, much of my limited knowledge, has come from others sharing their experiences online, just as I am doing now.
My hope, is that by putting my work in front of much more knowledgeable machinists, we can all learn something new together.
My Lathe: MSC / Prince 9517350 - 13x40 Manual Metal Lathe
My Milling Machine: Bridgeport Variable Speed Series 1 "J Head"
My other Milling Machine: Brown & Sharpe No. 2 Plain "light type" Universal Milling Machine
CREDITS:
Music and Sound Effects courtesy of www.epidemicsound.com
/ @hersch_tool

Опубликовано:

21 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 253

@Trainwreck1123 9 месяцев назад

Your channel feels a lot like Inheritance Machining, in that your video quality is superb and you haven't been doing this all that long. I hope that your channel blows up in the same way, it would be well deserved!

@hersch_tool 9 месяцев назад

Thank you very much! That is quite a compliment. I don't feel that I'm anywhere near as good as inheritance, but it sure does make me feel good to hear that! I truly appreciate your compliment and am grateful for the support. THANK YOU!

@MrDdaland 9 месяцев назад

@@hersch_tool u

@NeMoC53 6 месяцев назад

I agree with moth of you…. But Brandon is a psychopath….. he is a glutton for punishment but he’s damn good. Have you seen his last cube video!? Gee whiz…. But your content is higher quality as well. I appreciate your channel as well 😎👍 thanks for your content

@gregc1775 4 месяца назад

Hi. Watched this video GREAT IDEA. Went to the shed and made 24 of these. Once again great idea much more positive and coming lose. Always interested in machining as my Father was in the aircraft industry. But I went in another industry. Now retired I set up my own machine shop in the shed Love your sense of humour Take care NSW. AUSTRALIA 👍👍👍

@hersch_tool 4 месяца назад

thanks very much. i really appreciate you watching, and im glad they worked out for you. and thank you for the positive feedback!

@GARFIAS8800 9 месяцев назад

I just started watching your videos last week or so and so far I must say I really like them. I agree that your channels gives me inheritance machining vibes and it isn’t a bad thing. As a fellow machinist myself I really enjoy your videos. Keep them coming.

@hersch_tool 9 месяцев назад

Thank you so much! I really do appreciate the kind words and support. I'll keep working on them and trying to to get better every day! Thank you for watching, and see you on the next one!

@johanneslaxell6641 9 месяцев назад

Really like your style 👍🏼. What I done: taken a normal wrench (on my lathe 17mm), cut off the open end and use just the ring-handle. Then a little comment when you pointed out that the jam nut can move the other when tightening: Now there is ~90° where the screw will be behind the column. No big problem, just a "thing" 🤭😂.

@hersch_tool 9 месяцев назад

lol yeah, definitely some "bugs" to work out in this design. This will almost certainly be a "version 1.0" with a V2.0 to come in the future. :) Thank you for watching!

@lionelchevalier5650 2 месяца назад

Hello, first of all I love your way of being, of thinking and your humor.. Bravo... Regarding the video, it is very explanatory, clear, the words are always explicit and we see your interest in what you are doing. Just like you, I "have fun" with life, with my work, with what I do... We are in a big game with the same goal for everyone one day... we might as well take advantage of this time to learn skills , share them, distill them here and there... Good luck to you, continue and persevere with your beautiful vision of things, personally I find it very pleasant to watch and listen to, Best regards, Lionel.

@hersch_tool 2 месяца назад

Hi Lionel, thank you so much for the kind words and positive feedback. I do love what I'm doing, and the joy and satisfaction that it's brought me is the whole reason I wanted to share it with others. So I am really glad to hear that you're enjoying it as well. I work very, very hard at these videos, and comments like yours are what make it worth every second of it. So, thank you again for your comment, thank you for taking the time to watch, and I hope to see you around. Sincerely, HERSCH.

@lionelchevalier5650 2 месяца назад

@@hersch_tool The pleasure was all mine, I'll watch other videos and like ^^

@philmariop 9 месяцев назад

Looks clean and tidy. There is a possibility the timing for height will orient the lock screw into your post. May not matter if next higher/lower is good enough.

@hersch_tool 9 месяцев назад

Yeah that's a good catch, it didn't occur to me until I started to use it. But I'll use these 3 for a while and see how I like it. And thank you, and also thank you very much for watching!

@Geordiehux 9 месяцев назад

Hi you could machine a slit and lock screw into the other side but with the head reversed, that way you always have 1 head facing out. It may look 'Funky' but should work :). Love your videos keep them coming. PEACE.@@hersch_tool

@hersch_tool 9 месяцев назад

@@Geordiehux Yeah that's not a bad idea at all. And thank you very much, I'll keep working on them. :) And thank you for watching!

@glennwright9747 9 месяцев назад

Just lift it up/off and tighten the lock screw

@machinists-shortcuts 9 месяцев назад

Wouldn't it fall in half with two slits?@@Geordiehux

@joshpilant2315 9 месяцев назад

I just found your channel and this is the first video I've seen. You mentioned the irony of switching from a wrench to an Allen Key. I also see a problem where the locking screw would be stopped with the key slot facing your tool holder. I'm not sure if you measured out the nut slot to account for thread position in that instance, but I could see that as being your only problem. Please keep your vides coming. I've subscribed and look forward to seeing your channel grow.

@hersch_tool 9 месяцев назад

Yeah that's definitely a design flaw. I'll probably do a V2.0 at some point in the future to address that and any other issues I find along the way. Thanks very much for the sub btw, I'll keep working hard on the channel and hope to see you in the next one! Thanks!

@robertharper8776 9 месяцев назад

very good idea!!! this problem has showed itself a few times for me. thanks for the video

@hersch_tool 9 месяцев назад

Thank you very much! You're very welcome btw, and thank YOU for watching!

@Ferndalien 9 месяцев назад

This is great, and well done. This video is a good teaching tool, which introduced me to several ideas and a few techniques that I can use in my work - hobby, really. But since I use my adjustable wrench on several nuts or bolts of different sizes on my lathe, I think I'll be sticking to that for a while. Thank you for posting this.

@hersch_tool 9 месяцев назад

Thank you very much! I am no master machinist or anything, but I am incredibly grateful that I was able to share something that may be useful for you! I really can't express how much I appreciate your feedback. You are very welcome, and thank YOU very much for watching!

@JonMersinger 9 месяцев назад

Your videos are very informative. I look forward to seeing what you have planned next.

@hersch_tool 9 месяцев назад

Thank you! That's a very kind compliment. I'm just sharing the little bit of knowledge that I have, and trying to learn something new every day. And thank you very much for watching!

@eyuptony 9 месяцев назад

That's a great idea, I've had the same problem. They look very nice, even if you do say so yourself. I agree, future project.....Tony

@hersch_tool 9 месяцев назад

Haha, I don't mind tooting my own horn sometimes I guess lol. Thanks very much btw, and thank you for watching!

@bheckel1 7 месяцев назад

looks like a good idea. I would have to make 35. so I will just sit back and enjoy. Thanks for the content. Very nice quality.

@hersch_tool 7 месяцев назад

Haha yeah I have the same problem, not that many but still have to make a lot for all my holders. Thank you by the way, and thank you for watching!

@MrCubflyer 8 месяцев назад

I like that Idea im going to do something like that.

@niklnikl1 9 месяцев назад

Great idea. I like it a lot. The only problem is when the screw head faces the tool post. You won't be able to get the wrench in there.

@hersch_tool 9 месяцев назад

Yeah that's potential issue. Might end up making a V2.0 after I use these for a while and that'll be one of the things that get fixed. Thanks very much, and thank you for watching!

@priority2 8 месяцев назад

Not a problem, just lift the tool holder clear of the post, tighten and drop back in😊

@Festivejelly 5 месяцев назад

I love this! Weekend project for me! Thanks for sharing.

@hersch_tool 5 месяцев назад

Thanks very much for watching :)

@AmateurRedneckWorkshop 9 месяцев назад

Thanks for the video keep on keeping on.

@hersch_tool 9 месяцев назад

Thank you very much for watching!

@howardosborne8647 9 месяцев назад

Good idea but i think you could bet better all round access to the locking screw if you slit the brass thumbwheel horizontally rather than vertically. The horizontal slit would want to be about 1/4 way down from the top so the force needed to pinch the nut threads together isn't too high. Also consider trying some similar knurled thumb wheels with a homemade 'nyloc' insert and then it is just the friction of the 'nyloc' needed to keep them in the desired height setting. This is not intended to be any negative criticism of your efforts,just a bit of bouncing a few other ideas around. I do agree the standard thumb wheel and locknut system is a PITA to deal with.

@hersch_tool 9 месяцев назад

Thanks very much, those are both really good ideas. I have been kicking around ideas in my head to improve the design as this first attempt is "ok" but definitely isn't great. The "nyloc" or friction type solution seems interesting because ultimately I am always looking for ways to eliminate all of the extra tools that I'm constantly reaching for to help tighten and loosen things. I am adding both of these ideas to the list lol. There will be a V2.0 at some point when I find that "perfect" solution. Thanks again, and thank you for watching!

@gregc1775 4 месяца назад

Mean. To say that they don’t come lose They don’t come lose. 👍

@fishfreak911 9 месяцев назад

Awesome nuts! Love these. Mine come loose all the time. This is a better mousetrap vs. the jam nuts.

@hersch_tool 9 месяцев назад

Haha, thanks! It's definitely not a perfect solution but it's a good first try I guess. I'll probably have a "V2.0" at some point in the future. Would really like to be able to do it all by hand without any other tools needed. Thanks for watching!

@kyfho47 8 месяцев назад

So, you've eliminated the need for an adjustable wrench to tighten your locking nut. And replaced it with a hex wrench to tighten your locking nut. Nice work.

@robertcarmansr.204 9 месяцев назад

You rock brother

@hersch_tool 9 месяцев назад

Thanks man, so do you!

@joergengeerds360 9 месяцев назад

Thanks so much for making this video. I had made lock nuts with this design a couple of months ago after some inspiration from inheritance machining, from aluminium. My tool holders have a M12x1 thread, making hight adjustment crazy simple. I simply measure the tool tip height over the cross slide (95.65mm in my case) with standard calipers, and I can easily adjust the height by 1/20th of a turn (0.05mm). others on FB asked for more instructions/video, but I never got around to it. nice job choosing brass 🙂

@hersch_tool 9 месяцев назад

Thanks very much, my design definitely isn't perfect as has been mentioned in the comments but I think it's a pretty good start and was a fun project. And you're very welcome for the video, thank YOU very much for watching! It's the great support and awesome folks here in the comments that make it all so worthwhile and rewarding for me, so thank you!

@joergengeerds360 9 месяцев назад

@@hersch_tool the design works so much better than the 2 locknuts... I hade made a small fleet of 15-ish of those collar split nuts from alu months ago, and they just work perfectly...

@hersch_tool 9 месяцев назад

@@joergengeerds360 Yeah, the jam nut system just isn't great. I guess I get why they do it, it's cheap and easy to manufacture. but they sure can be a PITA. 🤣

@mickgentry8128 9 месяцев назад

nice upgrade, enjoyed and subbed cheers!

@hersch_tool 9 месяцев назад

Thanks very much, and thank you for the sub!

@seanmcalum9238 8 месяцев назад

Very nice video. Well done. Will watch more from you.

@hersch_tool 8 месяцев назад

Thanks very much! I appreciate the support! 👍

@bdove7939 7 месяцев назад

Don't beat yourself up too much about reinventing the wheel. As long as there are no sharp corners, it is probably still a wheel like object. Good video.

@hersch_tool 7 месяцев назад

Haha yeah I guess there's really nothing new under the sun anyway right? Thanks very much btw, and thank you for watching!

@skyfreakwi 9 месяцев назад

Now all you gotta do is make a double ended Allen WRENCH to use on these and the tool clamping bolts! I always figured doing something like this would also solve the height registration losses tightening the lock nut

@hersch_tool 9 месяцев назад

Hmmm, this is a pretty darn good idea... 🤔 Thank you for watching btw!

@MrCubflyer 8 месяцев назад

I really like the quick lock for your tool post also . I'm using a big crescent wrench

@hersch_tool 8 месяцев назад

Thanks very much. The quick lock handle has been a great little upgrade, really glad I did it. This particular project is ok, but I still feel like there is a better version of this to try at some point in the future. Thanks very much for watching!

@HoldMeBagS 9 месяцев назад

Smart idea. Good to see you again!

@hersch_tool 9 месяцев назад

Thanks very much! Good to see you in the comments!

@FullSendPrecision 9 месяцев назад

That's my favorite kind of project. Little things you have to make and can't buy. Especially if it's brass/bronze. Man I love bronze.

@hersch_tool 9 месяцев назад

Me too! It makes me feel like I actually know what I'm doing because it machines so nice lol. Thank you for watching btw!

@ralphpavero7760 9 месяцев назад

I like it a lot

@hersch_tool 9 месяцев назад

Thank you!

@Festivejelly 5 месяцев назад

You could make a small allen key holder that attaches to the toolpost. Like 3d print it or machine it, maybe held on with magnets. Doesnt need to be a huge key just a small key, then its always there.

@hersch_tool 5 месяцев назад

solid idea!

@Preso58 9 месяцев назад

Those lock nuts/knurled nuts drive me insane. They either work loose or jam and then wind out the stud. I'd like to replicate what you've done but I'll probably use steel and parkerise them. (Brass ain't cheap)😢 Cheers, Preso

@hersch_tool 9 месяцев назад

Yep, exactly! And steel might even be a better choice. I think I'll likely make some revisions to the idea over time, and the next version I would also like to try a nice stainless maybe. I love your channel btw, been following on my personal account for quite a while. Thank you so much for watching btw!

@nerddub Месяц назад

is there a solution for the situation where the bolt head is on the backside, colliding with the toolpost? is it stable enough to remove the tool holder, then lock it via the clamp? I love this idea, and am like 85% I want to add this to my lathe as well. Great project!

@RNMSC 2 месяца назад

One variation you might consider doing is not thread the back end, but instead put in a camlock nut on the back, (with a milled surface to cam off of) and effectively eliminate the need for even the allen key once t he cam-lock-nut is assembled and adjusted so the camlock latch works as expected.

@hersch_tool 2 месяца назад

@@RNMSC yeah that’s a pretty cool idea. Thanks for watching btw!

@Rustinox 9 месяцев назад

I think it's a good idea and it will work very well. And if the bolt ends up in front of the centre bolt of the toolpost, all you have to do is lift the toolholder a bit to be able to reach the bolt. So, good one.

@hersch_tool 9 месяцев назад

Thanks very much. I think they came out alright for a first attempt, they work the way I'd hoped they would so that's always a win lol.

@jimsvideos7201 9 месяцев назад

Good thinking.

@hersch_tool 9 месяцев назад

Thanks very much! And thank you for watching!

@Andrew_Fernie 9 месяцев назад

This is a great idea. Those adjusters annoy me every time I use them. I will size the lock screw to use the same allen key as the tool clamp screws.

@hersch_tool 9 месяцев назад

Thanks very much! And that is a great idea. Thank you for watching!

@edbilek8033 9 месяцев назад

Very nice video. I'm thinking I need to spend a few hours in the shop now. It is evident you've thought about the content to be able to explain what you're doing without all the 'ums' that plague so many other channels.

@hersch_tool 9 месяцев назад

Thank you very much! Yes I put a great deal of effort into the vids but it's worth every second for the awesome support and feedback that I get. The "community" of great folks that is springing up around the channel has been humbling, inspiring, and motivating. Thank you so much for watching!

@leonida-alexandrudiaconu8660 6 месяцев назад

It looks nice but the old system is way more practical. Is much easier to trow a wrench on the top nut and turn it than to fiddle around to get the allan wrench in place. Also, I would like to see how you use it if the screw lands in the other side.

@pikeyMcBarkin 9 месяцев назад

What a great fix for a specific personal issue. Thanks!

@hersch_tool 9 месяцев назад

Thank you very much!

@goboyz8016 9 месяцев назад

I like it.

@hersch_tool 9 месяцев назад

Thank you very much!

@harlech2 9 месяцев назад

Nice job, nice video... great quality. I only see one problem with your new 'system'. how do you tighten the cinch bolt when it faces outward from the headstock... ie faces the toolpost bolt?

@hersch_tool 9 месяцев назад

Thanks very much! And yeah we've been discussing that in the comments, can always lift it up or even use a washer, but it might need a version 2.0 in the future! Thank you for watching btw!

@foogee9971 9 месяцев назад

Thats a nice one! 👍I thank you - as always - for sharing your work! It seems to me, your video quality is getting better and better...thumbs up! 🙂

@hersch_tool 9 месяцев назад

Thank you very much! I'm working at getting better 🙂 And as always thank you for watching!

@aguycalledlucas 9 месяцев назад

Nicely done!

@hersch_tool 9 месяцев назад

Thank you very much!

@syldysnya 9 месяцев назад

Nice editing!

@hersch_tool 9 месяцев назад

Thank you! I am trying to get better and learn more about it with every video.

@tylerturner3830 9 месяцев назад

I like the idea. I'm wondering if there is a solution for when the ideal tool height means the new nut/knob sits so access to the allen portion of the fastener is blocked by the tool post. It seems you might be losing some fine adjustability with this. Am I thinking about this correctly?

@hersch_tool 9 месяцев назад

Yeah that could definitely be an issue. I am going to use these 3 for a while I think and see how it goes. But if it turns out to be a problem then might need to make some modifications. But it's all in fun, learning, and getting better. :)

@MurrayC 9 месяцев назад

If the allen screw isn't accessable you could add a washer underneath to change the position.

@hersch_tool 9 месяцев назад

@@MurrayC Great idea

@TrekSLDuraAce 9 месяцев назад

It needs to be a split collar with 2 screws that oppose each other. Then either screw can be used to tighten the brass nut at any rotation.@@hersch_tool

@TrekSLDuraAce 9 месяцев назад

It needs to be a split collar with 2 screws that oppose each other. Then either screw can be used to tighten the brass nut at any rotation.@@hersch_tool

@hitnmiss49 9 месяцев назад

Great improvement.

@hersch_tool 9 месяцев назад

Thank you!

@priority2 8 месяцев назад

I just found your channel and I love the excellent narration and outstanding video quality ❤Subscribed❤

@hersch_tool 8 месяцев назад

Thank you very much! I'm glad you're enjoying the vids and I appreciate the awesome compliment. And thanks for the sub!

@ShercoBill 9 месяцев назад

good idea,nicely done

@hersch_tool 9 месяцев назад

Thank you very much!

@cclark3452 3 месяца назад

Great idea and execution but what do you do if the height puts the socket head behind the or towards the spindle? I'm curious if the band could be a slip ring around the clamping surface so you could keep the socket head and an easily accessible angle.

@hersch_tool 3 месяца назад

Thanks very much. It's not perfect, there are definitely better solutions. this comment has been made about a bazillion times lol, you can lift the holder up and out of the way in that case, it works but again it's not perfect. Thanks very much for watching btw.

@TrekSLDuraAce 9 месяцев назад

It needs to be a split collar with 2 screws that oppose each other. Then either screw can be used to tighten the brass nut at any rotation.

@Michel-Uphoff 9 месяцев назад

Nice video! How do you tighten the split nut when the allen head faces the toolholder?

@hersch_tool 9 месяцев назад

Thanks very much! You can lift the tool holder or use a washer to re-clock the screw. And thank you for watching!

@manmachinemake3708 9 месяцев назад

I like it except if the new lock screw is facing the main assy, then it's gunna be tight to get an allen wrench in place. How about knurled thumb screws instead ? Next should be mushroom type caps to top the stud for a place to grab the holder when removing it from the post.

@hersch_tool 9 месяцев назад

Yeah that could definitely be an issue. I think this will likely be "mark 1" of this design lol. Thumb screws are a solid idea, and I love the mushroom post idea as well, that would definitely be a worthwhile upgrade. Thanks very much, and thank you for watching!

@mrpaint055 9 месяцев назад

Master Craftsmen.

@hersch_tool 9 месяцев назад

Wow that's a very kind compliment! Thank you so much, and thank you for watching!

@kentuckytrapper780 9 месяцев назад

I like it man,going to make myself a few, great video..

@hersch_tool 9 месяцев назад

Thanks very much! It's a fun little project, let me know how you make out. And thank you for watching!

@brucematthews6417 9 месяцев назад

I found your channel a few days back and watched the top lever being made. I liked your style of video making. but felt that I wanted to see another video with perhaps something original. Well, this was the one. I nice idea that is original, or original enough, that is combined with nicely paced and nicely narrated video. I'm sold and subscribed and liked. And I'll be having a go at my own brass set screw nuts like yours. But since I've got a bucket load of 1" good quality aluminum round bar I suspect that'll be my material of choice. My lathe has two T handle hex key wrenches that I use for my tool holders. I made them up with a cross bar and a knurled "spinner" stub to work with my tool holders. I use a mix of old and new that need a 3/16 and 4mm. Thus the two sizes. I find it's a lot easier to keep the shop made T handle hex key tools than the simple L keys. Those little guys seem to grow legs and hide....

@hersch_tool 9 месяцев назад

Thank you very much! I'm glad that I was able to earn the sub, I really do appreciate it, thank you! And the multi size t handle sounds like a great idea!

@ronmurphy9819 9 месяцев назад

I’m fairly new to machining. I like your ideas a lot. But I was thinking, what about a lever instead of that Allen screw?

@hersch_tool 9 месяцев назад

It would certainly be nice to not need the Allen wrench, a cam lever maybe? Thanks very much for watching!

@warrenjones744 9 месяцев назад

Not a bad idea.

@hersch_tool 9 месяцев назад

Thanks! It's a good start anyway I think. Could definitely use some improvements, but that's what trying and learning is all about! Thanks very much for watching!

@caploader111 9 месяцев назад

I think you can tighten the brass nut just enough so it will not come loose but can still be turned by hand. Meaning hex wrench will not be needed after initial setup.

@hersch_tool 9 месяцев назад

Yeah you can definitely find that "sweet spot" for a friction fit that will allow you to adjust it without the Allen wrench but is tight enough that it shouldn't move around on you. Thanks very much for watching!

@shawnmrfixitlee6478 9 месяцев назад

great idea ! I sure enjoy your channel , thanks .. 👍👍

@hersch_tool 9 месяцев назад

Thank you very much! I'm very happy that you're enjoying the channel, and I appreciate you taking the time to watch! So thank YOU! 👍♥️

@douglasthompson2740 9 месяцев назад

I wonder if a thrust washer under it would smooth the adjustment even more?

@hersch_tool 9 месяцев назад

Not really necessary because there isn't any pressure being applied when it's being adjusted. A thrust washer is good in circumstances where friction is acting against rotation, which isn't really happening here. Good question though, always looking to improve and that's what it takes! Thanks very much for watching btw!

@Itsdirtnaptime 9 месяцев назад

Piece of advice. I watch hobbist and people who do this for a living. I am very proud of the work I make. So i dont linke dings in my work. Get a long ejector pin of several diameters. Cut the head off. (They are hardend. This may be an issue) Stick them in the tailstock/chuck. Parts catcher! I hate watching parts fling to the bottom of the lathe. One layer of electrical tape will protect both surfaces. Not that it has much force when the cut off tool shoots it off. As for the wrench vs allen key... a small piece of magentic tape and 2 allen keys are easier to maintain and takes up less space than a wrench that is always in the way but no where to be found when i need it. 🤷‍♂️

@alexgonzalez2338 9 месяцев назад

Great stuff!

@hersch_tool 9 месяцев назад

Thank you!

@amarjeetrana-e5i 9 месяцев назад

Nice

@hersch_tool 9 месяцев назад

Thank you!

@terrydawson5304 9 месяцев назад

Because we are CIVILIZED people my favorite line love it. 😂

@hersch_tool 9 месяцев назад

LOL, the irony right? Thanks very much for watching btw!

@terrydawson5304 9 месяцев назад

The one thing I can't stand is good looking parts that are not deburred or have sharp edges. If you hand me a part that has this in my mind you failed. I was taught by old German tool and mold and die makers. That is a Total no no in their shop lol.

@hersch_tool 9 месяцев назад

@@terrydawson5304 the German machinists are masters indeed. I feel like they value the skills of machining and engineering very highly.

@Warped65er 9 месяцев назад

Time to do something about that pesky carriage lock wrench. Lol

@hersch_tool 9 месяцев назад

It's days are numbered... 😂

@jafo49 9 месяцев назад

A lock nut with a nylon insert would work. There are no forces that would make it turn and if it loosens from repeated adjustment you can buy them by the hundreds for pennies.

@hersch_tool 9 месяцев назад

Yeah that would work as well, but a nyloc nut is difficult to turn, usually requires a wrench, just isn't the solution I'm looking for personally. But I think would be a fine solution. I've actually had nyloc nuts on some of them in the past and ended up ripping them off in a fit of frustration while attempting to adjust tool height and dealing with the lock nut fighting me at every turn... pun intended? lol. Good idea though. :)

@davidellison4750 3 месяца назад

At certain height settings it seems access to the locking screw will be blocked by other parts of your setup. Is this a problem? You could probably use thin washer used as a spacer when that happens, with the right thickness of washer, it would move the screw to the front. Is there a simpler fix if the access to the locking screw is blocked?

@MrDdaland 9 месяцев назад

I do find it somewhat ironic that you swapped a wrench for a allen key. But will admit, looks like you did a nice job

@hersch_tool 9 месяцев назад

Lol, yeah. I guess I just have something against wrenches... No idea what my deal is with that. 😂 But thank you very much! And thank you for watching!

@obiwanbd1 9 месяцев назад

I call that an allen wrench though...

@takedeadaim8671 9 месяцев назад

What do you do when the SHCS ends up in a position that can’t be accessed by an Allen wrench?

@hersch_tool 9 месяцев назад

Good question, check the comments it's been brought up a couple times. It can be fixed with a washer, but likely there will be a version 2.0 of this in the future. Gonna use them for a while, and then make tweaks/changes based on experience using them. Thank you for watching!

@schwellenzaehler4564 8 месяцев назад

Nicely made👍, but i see there a problem.... how you lock the screw, when the hex is ecactly at your tool post? Okay you can take the tool holder out of the toolpost, but unlock the handle, get it out, lock the screw, get it in, lock the handle .......oh and now you realise the tool is too low/high.......the same procedure backwards and perhaps this more than one time......till it fits perfect..... That would bother me, after a short time of usage. 🤔

@hersch_tool 8 месяцев назад

Yeah, it's definitely not perfect. There is room for improvement, I'll make a V2.0 at some point in the future to address issues. Thanks for watching!

@randyshoquist7726 9 месяцев назад

Rather than some type of lock, I like to have a friction element, tight enough to keep it from drifting, but still allowing adjustment without tools.

@hersch_tool 9 месяцев назад

Yeah that's a good idea too. You can accomplish something like that with a design like this, just tighten the lock screw enough to cause drag but not enough to lock. I'd make them from steel maybe for that though. Just because the brass is likely to wear quickly against the steel post with all that friction.

@johngurney1069 9 месяцев назад

if you could have the Allen key same size as tool holder screws would be good

@hersch_tool 9 месяцев назад

Yeah that would be ideal. I was working with the cap screws that I had in my box, but I'm getting great ideas in the comments so maybe a version 2.0 in the future. Thank you very much, and thank you for watching!

@ellieprice363 9 месяцев назад

The handsome nuts are nice but the wrench is just extra work. Tighten the screws just enough for a light friction drag and leave the wrench on your bench. Adjust once and you’re done.

@hersch_tool 9 месяцев назад

That's not a bad idea! Thanks!

@lroyson 9 месяцев назад

How do you tighten the hex screw if center height adjustment causes it to be indexed on the side of the tool post?

@TrekSLDuraAce 9 месяцев назад

It needs to be a split collar with 2 screws that oppose each other. Then either screw can be used to tighten the brass nut at any rotation.

@winandd8649 8 месяцев назад

What if the screw is facing the tool post after setting the height? Are you able to sqeeze the hex key in between?

@spaaarky21 8 месяцев назад

12:56 Wow, trading a wrench for an allen wrench WAS disappointing. 😄 I was expecting something like a cam to clamp it in position instead.

@hersch_tool 8 месяцев назад

Haha, baby steps my friend, we’ll get there. This war is far from over! 😉

@dennistennyson8856 9 месяцев назад

OOOOH maybe Aloris will buy your reinvention.

@hersch_tool 9 месяцев назад

Lol 😂 thank you for watching!

@jackdelancey248 9 месяцев назад

Why not just 2 knurled knobs?

@hersch_tool 9 месяцев назад

That's definitely not a bad idea either. I've gotten some good ideas in the comments on this one so might be a "version 2.0" in the future. Thank you very much, and thank you for watching!

@MuntyScruntFundle 9 месяцев назад

What if the screw alignment is straight back into the tool post handles, I don't see how you'll get any tool in there to tighten the locking screw. Apart from that it's a nice idea. Just wondering if you could turn it into a downward locking screw within some kind of cam system?

@hersch_tool 9 месяцев назад

Yeah that's a valid question. Check the comments, we've been discussing it lol. You could always just lift the tool post off to tighten it, or add a washer, etc. But I'll use these for a while and might revisit with a V2.0 in the future to address any issues and make improvements. But it's not a show stopping issue either way at least for now. A cam lock with a thumb actuated mechanism might be a really cool idea too. Thanks very much, and thank you for watching!

@TrekSLDuraAce 9 месяцев назад

It needs to be a split collar with 2 screws that oppose each other. Then either screw can be used to tighten the brass nut at any rotation.

@hersch_tool 9 месяцев назад

@@TrekSLDuraAce that’s not a bad thought, but that splits the nut completely in two pieces which I think isn’t ideal either.

@dennistennyson8856 9 месяцев назад

Maybe you can reinvent the NUT on the knurling tool where you don't need a wrench.

@mattylarkspur9858 9 месяцев назад

a lot of them have bars for hand twisting instead of nuts

@joell439 9 месяцев назад

👍👍😎👍👍 - fun project

@hersch_tool 9 месяцев назад

It was a lot of fun, thank you for watching!

@jonirish323 9 месяцев назад

How about countersinking the other side too? That way, if your adjustment positions the nut in such a way that you can’t get your allen wrench in the set screw, you could just donit from the opposite side?

@hersch_tool 9 месяцев назад

You mean split the nut in half and use 2 screws instead of one? Yeah that could probably work. I might do some revisions to the design in the future if it turns out to be an issue so I'll be mining all the comments for ideas lol. Thank you, and thank you for watching!

@jonirish323 9 месяцев назад

@@hersch_tool actually, I was thinking of countersinking both sides, so you could insert the bolt from either side.

@hersch_tool 9 месяцев назад

@@jonirish323 The counter sunk side is clearance drilled for bolt, not threaded. That's what applies the clamping pressure as the bolt is tightened. If both sides were threaded, then the bolt would just bottom out and wouldn't apply a clamping force.

@jonirish323 9 месяцев назад

@@hersch_tool ahh

@hersch_tool 9 месяцев назад

@@jonirish323 😉

@dnickelson 8 месяцев назад

Doesn't this limit your height adjustment by like 1/3 of a turn every rotation? Like you can't actually set the height to any position that faces the screw head towards the body of the tool? Or is height not that critical of a measurement in general?

@hersch_tool 8 месяцев назад

Lol, read through the other comments, this has been asked, a lot... 😅 You can just lift of the tool holder to tighten it if that's the case, or can slide a washer underneath to change the position of screw head. Thanks very much for watching btw!

@almacdonald2506 8 месяцев назад

Just wondering if the threads for the SHCS are in both sides of the split, how you can tighten it. I would have thought it would work better with no threads on the head side, but maybe I’m missing something.

@hersch_tool 8 месяцев назад

You can't tighten it if both sides are threaded. As I explained in the vid, one side (the head side) is drilled for clearance around the bolt. Thanks for watching!

@almacdonald2506 8 месяцев назад

Ok, thanks for clarifying this for me!

@hersch_tool 8 месяцев назад

@@almacdonald2506 No probs :)

@wagglebutt 9 месяцев назад

Great video. I'm not sure how much it matters, but the purist in me would have cut the slot last on the mill.

@hersch_tool 9 месяцев назад

I can see that. The reason I did it first was really only to make it easy when drilling the clearance hole for the screws in the top half. It just made it easy to know where to stop because I could see and hear when I had cleared the top half. But, you could also measure and use a quill stop. Thanks for watching btw!

@hersch_tool 9 месяцев назад

Side note, love the screen name lol

@dennistennyson8856 9 месяцев назад

Maybe you can reinvent a new vise wrech where you don't need a wrench

@honeycuttracing 9 месяцев назад

Nice project, only seen one thing, if your adjustments have the screw towards the back, you may not have room to get your allen "wrench" to the screw, so yes you traded on wrench for a different one 😂 but still nice project and looks nice too

@hersch_tool 9 месяцев назад

Lol yeah, sweet sweet irony... 🤣 And yep, it definitely has some "bugs" that need to be worked out. This will likely be a "V1.0", I'll use these ones for a bit and see what I think and then make some tweaks/changes for V2.0 in the future. Thank you very much btw, and thank you for watching!

@artemdavinci 3 месяца назад

How to tighten the screw if its head will look at the center of the toolholder? )

@hersch_tool 3 месяца назад

you can just lift it up and out of the way in that case. but i think there is still a better design than this one for that reason which is why i haven't made more of these. thanks for watching

@ke6bnl 9 месяцев назад

BUT you had to use a wrench to tighten the knurling tool

@hersch_tool 9 месяцев назад

The war is far from over! *Shakes fist in air* 😂 lol, thank you very much for watching btw!

@JanneRanta 9 месяцев назад

What if the correct tool height is so that the locking nut is facing the tool holder? You wouldn't have access to the locking nut then.

@joergengeerds360 9 месяцев назад

you can just lift the holder up and off the QCTP

@hersch_tool 9 месяцев назад

@@joergengeerds360 Yep, exactly. It's a fair question though, and I think I'll use these 3 for a while and then maybe work on a version 2.0 to address any outstanding issues like that one that come up along the way.

@FragenMaister 9 месяцев назад

uhhmm.... hear me out.. but what if ... what if the head of the screw is directly in the center of the toolholder... how do you thighten it then?

@hersch_tool 9 месяцев назад

Very, VERY carefully... Lol. It's a design flaw. Lots of comments about it. Can pull up the tool holder, use a washer to re-clock the screw, etc. But I'll probably do a 2nd version in the future to address that and any other issues I find along the way. Thanks for watching!

@terryriegel 5 месяцев назад

What happens when the lock bolt is inaccessible?

@hersch_tool 5 месяцев назад

You can just lift the tool holder and tighten it down if it's facing the post. But for that reason and some others this isn't the end all be all solution. I still think it's better than the jam nuts, which constantly get stuck together on me, but far from perfect.

9 месяцев назад

Muito bom 👏👏

@hersch_tool 9 месяцев назад

Muito obrigado

@mfs5493 6 месяцев назад

This is OK - but ... the locking screw always has to point outwards to be accessible for locking. You can't lock the body in place if this is not the case. Ah, I don't think I'm the only one to have spotted this tho.

@charlieharper981 9 месяцев назад

Will your cap screw always be accessible when the allen socket is facing the center post? Any clearance for Clarence the modified Allen key? ?

@hersch_tool 9 месяцев назад

Good question, check the comments, we've been discussing this a lot. Could just lift it up, or use a washer. But might make a V2.0 in the future if it ends up being an issue. Thanks very much for watching btw! 🙂

@charlieharper981 9 месяцев назад

@@hersch_tool You fall into the category of " Thinking things through with practical application eludes most people"

@hersch_tool 9 месяцев назад

@@charlieharper981 not exactly sure what that's supposed to mean

@douglasthompson2740 День назад

I have to figure out a reason I don't like this idea or I will be making 52 at last count!!!

@hersch_tool День назад

@@douglasthompson2740 haha, it’s definitely not perfect but it works ok. I still haven’t replaced all of mine with this because I think there’s still a better design to be had. Something that can be tightened and loosened by hand without any tools is the goal for my next attempt. Thanks for watching btw

@billshiff2060 9 месяцев назад

... until the screw head ends up facing the locking hub and you can't get at it without taking off the holder....

@hersch_tool 9 месяцев назад

Yeah, that's been brought up a couple time. Thanks, and thank you for watching as well!

@ThantiK 9 месяцев назад

You traded the wrench for an allen key, AND you lost about 1/4 of the ranges that you would have been able to lock at. Since the allen key won't be usable if you need a height that causes the head of the allen key to protrude into the QCTH

@TrekSLDuraAce 9 месяцев назад

It needs to be a split collar with 2 screws that oppose each other. Then either screw can be used to tighten the brass nut at any rotation.