Quick Pump Up on eBike Tektro Hydraulic Brake Pressure without a Bleed Kit👍🏻

Подписаться 9 тыс.

Просмотров 84 тыс.

50% 1

Boost Hydraulic Brake Pressure on any Bicycle. Even Junk Bikes from ‪@juicedbikes‬
Nothing Scientific about this procedure. All you're doing is replacing fluid volume taken up from wear of the brake pads. Don't overthink this🙄
Check out my Amazon Storefront for everything you need for your Ebike
a.co/9x7pjO3
Materials Needed:
9 piece torx/star key wrench set amzn.to/35xSGEl
Hydraulic Fluid amzn.to/3ysgTs6
All CHINE_UH E-bikes use ‪@TektroUSA‬ POS 💩 Brakes
🛑DO NOT BUY JUNK BIKES FROM JUICED BIKES!🛑
Who has the best E-Bikes? ‪@LunaCyclesLLC‬ ‪@Electrek‬ ‪@Onewheel‬ ‪@BlueMonkeyBicycles‬ ‪@schwinnbicycles‬ ‪@ancheersport7119‬ ‪@SwagTronUSA‬ ‪@segwayrobotics3026‬ ‪@specializedbicycles‬ ‪@trekbikes‬ ‪@RideGiantBicycles‬ ‪@PedegoElectricBikes‬ ‪@bakcou‬ ‪@tesla‬ ‪@Super73‬ ‪@RadPowerElectricBikes‬ ‪@superhumanbikes‬ ‪@ElectricBikeReview‬ ‪@ElectricBikeReport‬ @ariel rider Grizzly
Please Subscribe for more E-Bike Content. Updates, Upgrades, Mods, Trip Reports, Plenty of Repairs, on this CHINE UH ‪@juicedbikes‬ P.O.S. E BIKE.
Everything is compatible with all E-Bikes
#eBike #HydraulicBrakes #UncleFjester

Авто/Мото

Опубликовано:

4 авг 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 88

@jessicaphoenix1312 5 месяцев назад

This is a good video. Not a bunch of unnecessary talking. I appreciate how the video stays on task and doesn't frustrate me. Thank you for he useful and concise content.

@Iseekoutthetrails 2 года назад

this is exactly the video i needed to see, No bullshit, just straight to The Brake hack.

@hallu7477 11 месяцев назад

You sir are awesome, thank you for the help!

@MadR6 2 года назад

Awesome, extended my lines a bit, going to try this to get the slack out.

@EXoTjC Год назад

I like your style. This is practical knowledge.

@CHANGONATION Год назад

You are a life saver, I was about to run out doing my first bleed and no pressure. Glad I found you at the right time.

@BK42Cycles 2 года назад

Great tip!! I'm going to tray it right away!!

@TheWinstonHan 11 месяцев назад

Thank you sir, you saved my day!

@oceanbrezz 4 месяца назад

that earned a sub thanks so much! much love bro

@rdkuless 2 года назад

:) i use a vibrating tooth brush to vibrate the hoses, that gets the air bubbles to come to the highest point. I just run the brush along the hose starting at the bottom, then i rubber band it while it's on to the hose.. then i add my fluid to the reservoir while pumping the lever.. :)

@UncleFjester 2 года назад

Great Tip! I keep losing my Ultra sonic tooth brush, then I find it in the drawer on her side of the bed 🤷🏻‍♂️

@rdkuless 2 года назад

@@UncleFjester Good job..keep her happy my friend.. :O i just bought a pulsar tooth brush for $5.. it last for ever (for Hydraulic bleeds only) LOL

@Kevin-dl1nv Год назад

Dang that's a really good idea!

@RobertBardwell 10 месяцев назад

My wife has a "massager" I might need to use

@markcook2980 6 месяцев назад

That’s brilliant!

@roncrow8992 7 месяцев назад

Thank you very much!

@rebaz7256 10 дней назад

Informative 👍

@bryceallen7035 11 месяцев назад

bro! thank you! i thought i was screwed 😅😂

@bonnavideo 3 года назад

Thank you

@Bbbuddy Год назад

Nice job. Lever fill cap has an o-ring and shouldn’t be over tightened.

@chrischaffey7071 2 года назад

Genius 👍

@op14435 9 дней назад

Can i use coconut oil ?

@racerx2095 3 года назад

NICE 👍👍⚡😁💯⚡

@mattruetz6524 2 месяца назад

Cool guy!

@UncleFjester Год назад

*"If you find this helpful, Please consider clicking on the "THANK$" Button"* 👍🏼

@erachampions Год назад

vielen vielen dank!

@UncleFjester Год назад

Du bist herzlich Willkommen

@ericstrohl2952 11 месяцев назад

We purchased this Vivi 27.5” electric bike and a Tentaquil 26” electric bike for our 13 and 14 year olds. ru-vid.comUgkxUiL0GnyDjP32RJdd660sP8mZk4CRLTCJ The Vivi was much easier to put together. With the Vivi, there was a video link to assist with assembly which made the process easier to follow (we did put the handlebars on upside down, but it was a quick and easy fix). With the Tentaquil, the assembly was not as simple to follow, but after we messaged the company for an assembly video, it was easier and they did respond quickly. The other major differences were that the Vivi has a grip throttle on the right handle (like a motorcycle) and the Tentaquil has a push throttle that you use your thumb to activate. The monitors were also different, so if you’re looking for something specific in terms of changing the bikes functions, pay attention to what the monitor offers. We were really impressed with the overall quality and functionality of both bikes, but if you’re looking for more power and an easier assembly, definitely go with the Vivi!

@chrisMc1972 2 года назад

Watched your video and fixed my breaks, thank you

@UncleFjester 2 года назад

Your welcome, Brakes not breaks 🙄

@SJDRacingNZ 2 года назад

@@UncleFjester You're welcome, not your welcome 🙄

@versatyledc Год назад

@@SJDRacingNZ 🤣

@Rushfan74 Год назад

Would I be able to swap the front brake line with the rear so that my rear brake is on the left side vs the right side without a new cable system. I don't know If I can just keep the brake levers in their current sides and just swap the cables from the brake lever to the other side? Is this doable?

@UncleFjester Год назад

Should be easy to do, all you'll need to do is bleed and refill the hydraulic lines. Or you can do what everyone else does and get used to it.

@Rushfan74 Год назад

@@UncleFjester Appreciate ya!

@rogerborg 5 месяцев назад

_Don't_ get the fill plug gutentite - you only need 1nm or so.

@cindyflores3090 Год назад

Do I have to use brand specific mineral oil/ brake fluid?

@UncleFjester Год назад

No, any will be fine

@bornfree5683 2 года назад

I have a brand new Super73 rx and I moved the brake levers to opposite sides of handlebars so had to mount them upside down to have the rear brake on my left and noticed my lever goes down almost all the way now. I adjusted that screw almost all the way in and it’s better but Im still almost touching my grip and brakes aren’t as strong. Any recommendations on gaining more pressure? Would turning the lever upside down do this? Thanks

@UncleFjester 2 года назад

YES! You can't turn them up side down! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-2C43zU9cHKM.html

@ArturTurner 5 месяцев назад

Swap the hoses not the levers.

@Dantectez Год назад

So I had no idea what I was doing with my tektro brakes and was trying to replace the pads which I guess didn't need replacing but down at the caliper I unscrewed the wrong screw right and all the liquid leaked out and now my frying brake has 0 power, when you pull it, it goes to the handle bar with 0 effect, I tried the brake bleeding thing with a kit I ordered with the correct mineral oil but still my brake has zero power what am I doing wrong how can I fix it please, I don't understand it very much and it's very frustrating, I just want my bike to work right please help someone

@UncleFjester Год назад

You opened the brake line and lost pressure, you need to do a full bleed and refill See if this helps, if not hydraulic brake may be beyond you mechanical abilities ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hfzLNN4lK70.html

@mrmadeuquit5280 Год назад

I'm not sure if this is the issue I have, tryna figure that out. Today I went to take my ebike out and immediately noticed my right/front brake wouldn't work at all when I squeeze it , it pretty much touches the handle. Does that sound like an issue related to this?

@mrmadeuquit5280 Год назад

I'm pretty sure these are same brake , mine is Tektro Dorado HDE350 Hydraulic Disc

@UncleFjester Год назад

@@mrmadeuquit5280 Yep same brakes, You lost pressure! look for fluid leaks, if it happened over night you'll probably have air in the lines now and need to do a full bleed.

@johnathanw3 2 месяца назад

Any idea i did this on my front n rear ebike brakes the front one filled up qnd is good and rear one i filled up but still no pressure on the brake handle ?

@UncleFjester 2 месяца назад

air in the rear system, or a fuid leak? Do it again on the rear?

@johnathanw3 2 месяца назад

@@UncleFjester okay I'll try it again. Should I empty all the fluid out and reuse it ?

@UncleFjester 2 месяца назад

Since you capture the fluid that bleeds out its OK to reuse it. Its not like it could get contaminated. Just keep putting fluid into the system till no air bumps out.

@who_eddxe5376 2 года назад

So I can use baby oil to put in my brakes

@UncleFjester 2 года назад

Baby Oil is Mineral oil with a fragrance Bicycle Hydraulic Fluid is Mineral Oil with food color.

@carlsedso Год назад

Gud N Tight! Lmfao

@homeiswheremyhouseis5517 Год назад

So I am having this exact issue with my Tektro brakes and just attempted this fix but after adding the mineral oil and putting the screw back in it didn't change anything, the brake handle still pulls almost all the way to the grip. Any suggestions?

@UncleFjester Год назад

How old are your Pads? tektro brake pads are basically designed for little girls light weight bikes with no power and wear out super fast. When pads are new they are thick, as they wear they get thin which puts lots of play in the system. Depending on your riding style, 500-800 miles is all you can expect.

@homeiswheremyhouseis5517 Год назад

@@UncleFjesterIt's a new Ride1Up LMTD with only 156 miles on it. I ride fast on full power with a heavy bike but that still seems like too little.

@UncleFjester Год назад

Sounds like you need to bleed the brakes. check every fittin on the lines to make sure nothing is leaking. If there is or was a leak, then there is air in the lines. The tektro 350 is a bottom of the barrel entry level POS system. I doubt we could find a cheaper hydraulic brake set up if we tried. Keep spare pads, fluid, and a bleed kit on top of your work bench. You're gonna get real good, real quick on brakes.

@homeiswheremyhouseis5517 Год назад

@@UncleFjester I see, it's my first Ebike and I am learning a lot fast. Thanks for all of the info. Couple last questions: Do you have pads or a bleed kit you recommend?

@UncleFjester Год назад

amzn.to/3VPuuWF

@St.FighterZ 2 года назад

You dont have ariel rider in your description for best bikes. what up with that. I love my grizzly.

@UncleFjester 2 года назад

Haha, Nice Bike too! Those @tags are links to other RU-vid channels, I can't find an Ariel Rider Channel

@geoffgilbert4962 Год назад

what tires do you have on that hyperscorpion?

@UncleFjester Год назад

these and they are awesome! amzn.to/3emclPc amzn.to/3Mo7uK0

@UncleFjester Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8-npoP7AHQo.html

@GaZflow Год назад

That’s the German word for virgin and schtopam floppin is a brazier 🤣 5:15

@UncleFjester Год назад

😆

@GaZflow Год назад

@@UncleFjester I ended up on this video cause I just got my bleed kit and I’m going to attempt to do this today…probably….well right now actually I have been putting it off all day. Procrastination is going to have to wait I got shit to do 😂 I enjoy your videos you remind of a slightly older me and usually I hate myself but you seem to be a slightly older and more likeable version of myself. 🤣

@UncleFjester Год назад

I found my Mini Me? 🤣 Doing a brake bleed the first time sucks, it gets easier with practice.

@GaZflow Год назад

perfect timing on the reply I was just scrolling history to find this video starting the brake bleed right now

@GaZflow Год назад

I Do have the bleed kit So I’m gonna go back to the other video of yours and then watched this one future reference