Hi! This video was so helpful. I'm getting "A tensor with all NaNs was produced in Unet." I followed instructions (float32) and tried a few prompts but no luck. M1 with 16 RAM
Is this an Unlocked and Unleashed version that you are talking about or is this software just a normal Locked version? Thanks and I look forward to your reply. John E
Thanks for the video: after months of trying finally I've managed to install Stable Diffusion on my Mac. Only one problem now, when I try to generate an image this text pops up: AttributeError: 'NoneType' object has no attribute 'lowvram' Time taken: 0.0 sec. Do you know whay is this happening and what can be done?thanks
Thank you for the video. Did you succeed to install deforum or other installations on your M1? I got the same MacBook Pro M1 Max and I don't know the way to do this properly...
Yes, Deforum works well on my MacBook Pro M1 Max, also with ControlNet. I've installed both extensions (Deforum first, then ControlNet) in Automatic1111 through Extensions->Available->Load From, then install Deforum, restart StableDiffusion completely in the terminal, repeat the same process with ControlNet and download the ControlNet models from huggingface, as described here: github.com/Mikubill/sd-webui-controlnet. Just take care if any updates are needed. If something went wrong before, try to delete the Deforum and ControlNet folders inside ~/stable-diffusion-webui/extensions, then update Auto1111 with git pull and try it again from scratch. Hope that helps, I didn't have any problems.
Thanks for the above steps. Are there any update on the steps because certain packages / models has newer versions? Hope you could reply. Thanks. again
Sure, could you just tell me if there are any error messages shown in your terminal window when you start StableDiffusion - if there are, just post them here, so I can take a look if there are problems with some packages. If you just want to update Automatic1111, open a terminal window and type cd ~/stable-diffusion-webui git pull which should update the webui to the newest version. Then just start it as usual, typing ./webui.sh If you want to update any extensions that are installed in your webui, go to the extensions tab, click on installed, then hit "Check for Updates" , and then "Apply and Restart UI". Hope that could be helpful? If there are still problems, please send me the error messages, so I can take a deeper look!
Hi I am using MacBook M1 Pro 2021, I follow your instruction, the step 1 run pretty well but I stuck at step 2. The terminal can't run the step 2 command (command not found: brew). Please help
It seems that brew is not installed on your machine, so you need to do that before you can continue. Paste this command into your terminal and follow the instructions: /bin/bash -c "$(curl -fsSL raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)" You will need to enter your Mac password, when asked for it (and it won't be visible while you're typing it). Here's also the link to the Homebrew side brew.sh/ and some further explanations, in case you need it: github.com/AUTOMATIC1111/stable-diffusion-webui/wiki/Installation-on-Apple-Silicon Please leave me a note, if you have any further problems!
@@-RenderRealm- Thanks for your sharing :) Recently I get another resources to do it. Finally its works. Before start the second command, type on "export PATH=/opt/homebrew/bin:$PATH" , then run the following step. It run pretty well, thanks
Automatic1111 should also work on an Intel Mac, but unfortunately I can't test it out, because I don't own one. I've found a post on Reddit, which should be helpful to you: www.reddit.com/r/StableDiffusion/comments/xboi31/guide_for_installation_on_intel_mac/
@@-RenderRealm- all the steps you suggested work, but in the end it gave an error in a python library that is not compatible with my machine. Thank you anyway
It seems that brew is not installed on your machine, so you need to do that before you can continue. Paste this command into your terminal and follow the instructions: /bin/bash -c "$(curl -fsSL raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)" You will need to enter your Mac password, when asked for it (and it won't be visible while you're typing it). Here's also the link to the Homebrew side brew.sh/ and some further explanations, in case you need it: github.com/AUTOMATIC1111/stable-diffusion-webui/wiki/Installation-on-Apple-Silicon Please leave me a note, if you have any further problems!
@@-RenderRealm- looks like now it stuck at Installing open_clip Cloning Stable Diffusion into /Users/stone/stable-diffusion-webui/repositories/stable-diffusion-stability-ai... waiting for an hour already do you have any tips how reset?
Hello, many thanks for this video. However I keep on stumbling on this error message after step 6, when wanting to run Automatic1111: "RuntimeError: Couldn't install gfpgan". Any help would be much appreciated. Thank you