QuickJack Setup and Use on a Low Car 

It actually scratches the paint on the underside of the QuickJack rather than doing any damage to the floor. There are some videos on YT where people have made it easier to move around, but I haven't done anything like that yet.

Yes, I use the rubber hockey puck style twist to lock pads in the Porsche jack points. Those then rest on the quickjack blocks when the jack is lifted. The smaller size of the jack pad compared to the blocks keeps all contact with the car away from anything that shouldn't be touched. With this set up and my small yellow ramps, I have no issues with clearance and the jack has sufficient space to start the lift and pressurize before bearing weight.

I don't think so, but I'm about to find out by doing an oil change. I may add one additional level to my yellow ramps. That would let me safely use the larger QuickJack rubber blocks and give just a little more room to get at the fasteners.

any update? I have a 718 Spyder and will buy the quick jack soon. question is tl-5000 or tl-7000@@focusedwherever

I haven't had a chance to check the access to the panel fasteners and clearance to remove them. If I had it to do over again, I'd probably buy a bigger one. That being said, check the frame specs on the QuickJack website to make sure your choice fits between the tires of a 718. @@borntokill158

It's just precut MDF from home depot

Yep, precut panels that I cut some more to create the step up, glued, screwed, and oil based painted.

@@focusedwherever it's almost like you said it in the video at 1:15 and if people watched it they would find out =)

Large decal should be facing towards the front of the car. Be safe 👍

This car is mid or rear engine so sometimes it's better to put it on rear.

This.

2021

@@focusedwherever thank you I jus wanted to know for the paint code.