Тёмный

R7S 118mm LED Lamp's Testing out NEW 13/30Watt - 890 

My PlayHouse
Подписаться 87 тыс.
Просмотров 38 тыс.
50% 1

In my living room lamp is a 300watt Halogen light bulb,, thinky. That is a lot of power usages. It does make a nices amount of light and a good color temperature,, but that is a lot of power.
So I have been trying to replaces these R7S Halogen light bulb. With something less power hungry,, over the years,,, this is yet a try,, with two new 13 and 30 watt bulbs.
[Affiliate Links]
300watt Halogen 120 volt : amzn.to/340jHwT
Link to R7S LED Bulb Lamp 10W - amzn.to/1o6xbCo
Link to R7S 10W Dimmable 100-230V - amzn.to/2MDHj4J
_______________________________________________________________
/ myplayhouse
Even just 1$ a month, comes out to the same as Binge-watching like 400+ of me Videos every month.
My PlayHouse is a channel where i will show, what i am working on. I have this house, it is 168 Square Meters / 1808.3ft² and it is full, of half-finished projects.
I love working with heating, insulation, Servers, computers, Datacenter, green power, alternative energy, solar, wind and more. It all costs, but I'm trying to get the most out of my money, and my time.

Наука

Опубликовано:

 

15 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 99   
@jimo680
@jimo680 3 года назад
Thanks, Morton. I'm glad to find someone else attempting solutions....lol, I thought I was the only one spending money on 5 different kinds of lamps,lol. Thanks for taking the time to share this...it helped me out a lot.
@MyPlayHouse
@MyPlayHouse 3 года назад
Hi Jim O Thank You very much! I enjoy testing these cheap LED lights,, to see if there is a hidden gemstones :-) Thank you for watching! :-)
@officialdjhoody
@officialdjhoody 3 года назад
Thankyou so much for your video. You just saved me a bunch of cash. Good research and great vid.
@MyPlayHouse
@MyPlayHouse 3 года назад
Hi HOODY'S MIXED MEDIA Thank You very much! Yes even if I found them all to be rather doubtful,, that is also helpful,, when shopping for these R7S :-) Thank you for watching! :-)
@Midhunchowdary
@Midhunchowdary 3 года назад
Very genuine review loved watching it
@MyPlayHouse
@MyPlayHouse 3 года назад
Hi Midhun Thank You very much! to bad non of them was really good :-) Thank you for watching! :-)
@mitchellarmstrong3759
@mitchellarmstrong3759 2 года назад
Nicely done. I tried a couple of different LED bulbs, they were all crud. I wired in a recessed led dimmable panel into 3 different lamps.
@MyPlayHouse
@MyPlayHouse 2 года назад
Thank You,, I have not really come across anything really good yet :-/
@babycat357
@babycat357 3 года назад
Thank you Sir👍🏾
@MyPlayHouse
@MyPlayHouse 3 года назад
You are very welcome
@user-bi8om5by7x
@user-bi8om5by7x 3 года назад
Helpful,ty!
@MyPlayHouse
@MyPlayHouse 3 года назад
Hi Николай Желев Thank You very much! glad you liked the video :-) Thank you for watching! :-)
@skjerk
@skjerk 4 года назад
You have to use an LED-dimmer. Normal dimmers (made for incandescent bulbs) doesn't work with LEDs (even dimmable LEDs). Try to bypass the dimmer built into the lamp. You even might need a dedicated LED driver instead of the one used to drive the Halogen lamp.
@MrLorgen
@MrLorgen 4 года назад
I think you are on the right track, normally these inline triac dimmers go up to 95-99% and causes the flicker because it's not clean ac power. No problem for incandescent bulbs.
@LocnavLivoc
@LocnavLivoc 4 года назад
i was gonna say the same thing
@MyPlayHouse
@MyPlayHouse 4 года назад
Well,, I was looking for a replacement, and I did not want to change a whole lot,, it just needed to work.
@johnstancliff7328
@johnstancliff7328 3 года назад
On my lamp, same as yours, I had to by-pass and remove the dimmer switch... so mines either on, or off.... I'm still using the halogen Bulb... will try out the led version when the Halogen burns out.
@MyPlayHouse
@MyPlayHouse 3 года назад
Hi John Stancliff Thank You very much! Yes LED´s are harder to dimm,, than the good old ones, glad you liked the video :-) Thank you for watching! :-)
@johnstancliff7328
@johnstancliff7328 3 года назад
@@MyPlayHouse I really like the newer LEDs but am finding, like you... they just aren't bright enough in certain applications. these fllor lamps came with 300 Watt Halogen Bulbs, what LED is bright enough to replace it.... so far, I'm only finding 100 Watt equivelant bulbs...
@plasmar1
@plasmar1 4 года назад
for the smaller lights if you can find philips led r7s lights, they seem brighter than average; I'm not quite sure about what actual type of lead's they use but definitely better than the Chinese ones I bought although more expensive
@MyPlayHouse
@MyPlayHouse 4 года назад
I was really hoping to find something that would replaces that 300watt in light output,, and not to expensive;-)
@plasmar1
@plasmar1 4 года назад
@@MyPlayHouse hehe, I think if you want to try to do that you will have to maybe diy something with one of those circular cobs:P...... I think the design of the r7s's are a bit to restrictive for the time being; the Philips I was suggesting are at best similar to the lumens of 60 to 80watt~(haven't compared side by side).....
@michaelwill1337
@michaelwill1337 4 года назад
Cool video. Bummer about the base breaking apart. I thought those filament-led lights (the last two you tried) would have zero flickering. I wonder if the dimmer is the culprit, or if lights can be made for certain hertz 50/60 and you have ones that don't match what your country has. just a guess. I would put an epilepsy warning up somewhere for this video. I don't have it but the flickering still got to me- i feel a little dizzy now. Kanye's video didn't bother me though.
@MyPlayHouse
@MyPlayHouse 4 года назад
Sometimes the flickering was worst on the camera, and sometimes you did not nearly get half of it :-/
@Seegalgalguntijak
@Seegalgalguntijak 4 года назад
The rolling shutter effect is a problem. It may be that the electronics is too small/enclosed to see, but if not, it will still flicker at 50Hz, so changing your camera setting from 25fps to 30fps may get rid of the rolling shutter.
@MyPlayHouse
@MyPlayHouse 4 года назад
Hi Seegal Galguntijak Thank You very much! They was blinking so much that it was impossible to work with. Thank you for watching! :-)
@johnmitchell8925
@johnmitchell8925 Год назад
I've got a similar light and have 3 0r 4 brand new 500 w halogen bulbs dimmable. i just love the way it spreads the light across the ceiling. But man does it suck the watts You know like that old 70s Buick🤣Ive been thinking about going the LED route for a while but like you said its just not the same light😒
@MyPlayHouse
@MyPlayHouse Год назад
Hi John Mitchell Thank You very much! glad you liked the video :-) Thank you for watching! :-)
@tamias82
@tamias82 4 года назад
I would ike to suggest using a manual camera exposure for such test and not automatic one. Than we might be able to actually see the difference in the amount of light coming out of different light sources.
@MyPlayHouse
@MyPlayHouse 4 года назад
Hi Mickey Rourke Thank You very much! I was thinking the same thing while editing,, specialty seeing all the lights becoming close to the same color, after the automatic white balance. :-/ Thank you for watching! :-)
@elliottsw
@elliottsw 3 года назад
LED Bulbs need to be dimmed with an intelligent dimmer that uses pulse width modulation rather than dimmers designed for halogen bulbs which are just resistors. That's why some say they are dimmable but don't seem to be - you need a specific LED dimmer switch.
@elliottsw
@elliottsw 3 года назад
I should add as well that they will flicker on camera because they turn on and off at 60Hz and your camera records at 60fps - a traditional bulb glows all the time so no flickering, LED bulbs turn on and off (twice) every time the AC voltage oscillates - the nice LED bulbs should in theory stay illuminated for more of the time than cheaper ones which is why some flicker more than others. Thanks for the video! :D
@MyPlayHouse
@MyPlayHouse 3 года назад
Hi Sam Elliott Thank You very much! glad you liked the video :-) Thank you for watching! :-)
@raphaelelvish2430
@raphaelelvish2430 4 года назад
I have something similar to that in my ones my old ones used 150watts they are $30 plus AUD in Australia for the led ones.🤯
@MyPlayHouse
@MyPlayHouse 4 года назад
But did your led work as it should? Or is it the same doubtful stuff, that I am showing here?
@raphaelelvish2430
@raphaelelvish2430 4 года назад
No it work fine we love it
@kitecattestecke2303
@kitecattestecke2303 4 года назад
@@raphaelelvish2430 eBay aliexpress amazon has them cheap
@zenja42
@zenja42 4 года назад
The flicker is the 50 hertz of the grid, because there is no DC convertion in between. The faster flicker could be 100 hertz because of bad electronics.
@MyPlayHouse
@MyPlayHouse 4 года назад
It seams more random than just 50Hz and did not flicker until the lamb had heated up.
@bestamerica
@bestamerica 3 года назад
' how about the dimmer control... can fit work or not
@MyPlayHouse
@MyPlayHouse 3 года назад
I did not have much luck,, it wa all pretty bad.
@cheguevara5940
@cheguevara5940 3 года назад
7:15 min! It's standard! I know so many people who have similar lamps, and all of them (incl me) had the same issue! They thought "we can make a cheap and fast solution", but instead of covering the Concrete with a thicker layer of Gummi or plastic, they juts painted a layer over it, and through a period of time it started to crumble! It sucks!
@MyPlayHouse
@MyPlayHouse 3 года назад
Hi Che Guevara Thank You very much! glad you liked the video :-) Thank you for watching! :-)
@cheguevara5940
@cheguevara5940 3 года назад
@@MyPlayHouse No problem 👍🏻 I was immediately remembered when I saw the concrete base, and it's quite a task to find something that fits in it, with enough strength and weight! The cutting and fiddling was a easier task 😂😂😂! Thank YOU for bringing interesting tests and daily life needs! I will watch your Channel more often, it was my first time. But not the last! 😊👍🏻
@Seegalgalguntijak
@Seegalgalguntijak 4 года назад
These Halogen rod lamps that light up the ceiling aren't really good for LED replacements. That is why I have bought a lamp that is similar in shape, but has an E27 fittin in the top. There, I screw in an 18.5W Phillips LED or a 21.5W Osram (Ledvance) LED. They have the light output of a 130W or 150W incandescent bulb, and that's plenty of light! I spread of 4 of these similar things throughout my large room (which is about 25 m² I think), and now I can make it really bright.
@Seegalgalguntijak
@Seegalgalguntijak 4 года назад
All the LED bulbs I mentioned above are available for 10€ per piece in Germany, so maybe as well for you?
@MyPlayHouse
@MyPlayHouse 4 года назад
I have been looking for years :-/ and still waiting...
@Seegalgalguntijak
@Seegalgalguntijak 4 года назад
@@MyPlayHouse I mean this one: www.amazon.de/dp/B01HD54OP6/ or this one: www.amazon.de/dp/B073JG8V4S/ in combination with something like this: www.amazon.de/dp/B002FOG7V0/ - they are really bright. Maybe even use 2 in different corners of the room instead of only one?
@lezbriddon
@lezbriddon 4 года назад
chinese ebay sellers use the chinese watts system, its like 1/3 of what the real world uses, this conversion actor also applies to pure sine wave inverters.....
@MyPlayHouse
@MyPlayHouse 4 года назад
There are some doubtful watt among them. :-)
@Eo_Tunun
@Eo_Tunun 4 года назад
Morten turned towards the dark side. Probably for the cookies. o.0
@MyPlayHouse
@MyPlayHouse 4 года назад
No I am trying to brighten up the Darkside so everyone can see the delicious cookies. :-)
@JohnnieHougaardNielsen
@JohnnieHougaardNielsen 4 года назад
I was hoping for an recommendation for a good LED r7s update to a similar lamp from the estate of the previous owner of my house. I suppose that it'll work better to pay a bit more going to a lamp shop here in Denmark.
@MyPlayHouse
@MyPlayHouse 4 года назад
Hi Johnnie Hougaard Nielsen Well I thought that at least one of the two new ones would be great,, they was not,, still crap. So I only hope that you leave the video with a lot of input on what not to do. Thank you for watching! :-)
@sheliajones4601
@sheliajones4601 3 года назад
Hey could someone tell me how to replace the pole lamp dimmer switch in this lamp please.
@MyPlayHouse
@MyPlayHouse 3 года назад
a lamp like mine ?
@sheliajones4601
@sheliajones4601 3 года назад
@@MyPlayHouse Yes the one in the video it's a tochiere light floor lamp. Thank you for getting back to me.
@dashtesla
@dashtesla 4 года назад
I had some of these in my lab turned on 24/7, the thing with these chinese leds they have really poor colour rendering index (CRI) and at least from my own experience they die really quickly i never bothered to take one apart but likely bad capacitors and maybe one led going bad and taking down an entire row since they're in series. I would say mine would last anywhere from 1-3 months 24/7 nowhere near the 30-50k hours LEDs are usually rated for which means you also have to add the extra cost of replacing them to the mix, they looked very similar to yours (the R7S) hopefully you'll have better luck than me.
@MyPlayHouse
@MyPlayHouse 4 года назад
Well I am not able to work with the blinking of the new ones. It does not help that the LED’s are good for 30-50k hours,, if the electronic is piss poor and dies after 200 hours :-/
@dashtesla
@dashtesla 4 года назад
@@MyPlayHouse Mine had some visible flicker without dimmer with my own eyes as well and on camera, it's usually due to how they're designed, cheaper ones use capacitors to drop the voltage and puts a lot of stress on caps plus they're already low quality and running at really high temperatures, even with really good low-esr caps i don't think it's possible to design one of these that doesn't fail quickly with a reasonable light output as you would expect from a 300W-500W halogen which also serves as a space heater in the winter, and has perfect CRI. But make sure you're shooting at 50fps not 60/30fps since the 50hz frequency will affect them, also in some cases helps running them off straight DC (when possible/you have access to that voltage etc, cheap ones with capacitive drop can't do that) specially camera lighting or any lighting that's likely to be on camera at fps that doesn't match mains frequency. I also personally don't like warm white, most people do but i prefer daylight (5000-6000k) which is a good reason to replace any halogens.
@kitecattestecke2303
@kitecattestecke2303 4 года назад
The cob ones with lower power last longer. We have one chandelier with 24 1,4w cob e14 candles since 2007 for 79€ total back then. 0 replacements
@zx8401ztv
@zx8401ztv 4 года назад
Leds really don't cope well with a.c power, they store no energy to smooth over there on/off switch over events, mad flicker :-( There non linear response to a rising voltage doesnt help eather. A propper led a.c to d.c driver may be the only way. Never mind mort, it was a good test :-D
@MyPlayHouse
@MyPlayHouse 4 года назад
The LEDs didn’t flicker right away they only started flickering when they got warm.
@aarondynamics1311
@aarondynamics1311 3 года назад
@@MyPlayHouse I noticed that when I bought some LED MR16 bulbs to replace the 50W halogen bulbs we had, there were 10 of them in total. On 3 out of 4 circuits they started flickering immediately after pressing the switch but the three bulbs that were on the 4th circuit appeared to turn on normally, although some appeared brighter than others. After about 5 minutes they started flickering as well. The reason for this was that the existing transformers outputted 12VAC instead of the required 12VDC. I replaced the transformers with LED ones and that solved the problem - no flickering and the lights were equal brightness Edit: I think the difference in brightness was due to small differences in the output voltage of the transformers but if someone could explain why the LEDs initially operated normally on AC on one of the circuits I'd really appreciate it.
@kacper9207
@kacper9207 4 года назад
✅🥇✅
@MyPlayHouse
@MyPlayHouse 4 года назад
Hi SKY NET CYBER SYSTEM 2 Thank You very much! glad you liked the video :-) Thank you for watching! :-)
@Andrew_Sparrow
@Andrew_Sparrow 4 года назад
Repair it :p Or just rest a couple of SLA batteries on top of the base ;)
@MyPlayHouse
@MyPlayHouse 4 года назад
Wonder why I didn’t think of that :-)
@Runehorn
@Runehorn 4 года назад
Just wrap your room in Christmas lights.
@MyPlayHouse
@MyPlayHouse 4 года назад
Hi Runehorn Thank You very much! ahh maybe LED lights,, not christmas.. Thank you for watching! :-)
@markpotter6186
@markpotter6186 4 года назад
It is dimmable, once.....
@MyPlayHouse
@MyPlayHouse 4 года назад
Hi Mark Potter Yes and with a nice "puff" sound, that tells you that it made it to the off position :-) Thank you for watching! :-)
@NawtieBoy96
@NawtieBoy96 2 года назад
Can we power with DC ?? if yes how
@MyPlayHouse
@MyPlayHouse 2 года назад
They might work with 230 volt DC,, but not a great way to do it,, look for light for cars or mobile homes.
@matiasm.3124
@matiasm.3124 4 года назад
Now buy a new lamp with a big bulb :D. 2x1 deal
@MyPlayHouse
@MyPlayHouse 4 года назад
If I can just find a 300watt replacement for this,, LED though ;-)
@jmonsted
@jmonsted 4 года назад
Typical, you spend a small fortune on LEDs for it and it breaks. The reason you shouldn't touch the halogen bulbs is because it gets extremely hot and the oils from your fingers will make it potentially crack the glass. If you scrap the lamp and have no need for the bulbs, it seems like a good donation for Bigclivedotcom for him to play with. You could build a round piece of board covered in LED tape that fits in the bowl of the lamp.
@MyPlayHouse
@MyPlayHouse 4 года назад
I am sure Bigclivedotcon has taken these apart ;-) I’d really like to get an replacement for that 300watt bulb, some LED that gives out the same amount of light. Haven’t found it yet.
@marklittler784
@marklittler784 Год назад
Concrete that's not very environment friendly they should have just filled a plastic base with sand.
@MyPlayHouse
@MyPlayHouse Год назад
Well I think sand is lighter,, so a bit more would be needed. and that might not look as "good".
@FunkOsax
@FunkOsax 3 года назад
You need some decent screwdrivers !!!
@MyPlayHouse
@MyPlayHouse 3 года назад
Often I am just to lazy to go get them :-)
@jec_ecart
@jec_ecart Год назад
Some of your led retrofits have very annoying flicker.
@MyPlayHouse
@MyPlayHouse Год назад
Yes the do,, and the camcorder, amplifies it even more.
@esmannr
@esmannr 4 года назад
Turn the light off! Pleeeeease!
@MyPlayHouse
@MyPlayHouse 4 года назад
Hi esmannr Thank You very much! but that makes really bad video :-) Thank you for watching! :-)
@jamesdecross1035
@jamesdecross1035 Год назад
Been trying these bulbs myself. They flicker terribly - utterly useless.
@MyPlayHouse
@MyPlayHouse Год назад
I am still to find a high watt good one :-/ Do let ne know if you find something good..
@viewer7200
@viewer7200 3 года назад
dimmable lights need to be dimmed. way too long video - edit to 5 minutes.
@MyPlayHouse
@MyPlayHouse 3 года назад
Sorry, that is not the kind of videos i do.
@gatsbylight4766
@gatsbylight4766 3 года назад
Soooooo, what?? I didn't have time to watch 17 hours of this video. Was there some sort of conclusion? All I needed to know is *which bulb worked best, if any of them* ?
@MyPlayHouse
@MyPlayHouse 3 года назад
Non was very good.
@einfelder8262
@einfelder8262 4 года назад
The great thing about this video is you can now throw out that hideous lamp and all those junk chinese bulbs :)
@MyPlayHouse
@MyPlayHouse 4 года назад
Hi Ein Felder Thank You very much! But only the lamp is gone, and I hope to take the bulb that sayed puf, apart to see what went wrong :-) Thank you for watching! :-)
@sardar7
@sardar7 4 месяца назад
That chinese crap is nothing more than waste. Shouldn't be purchased; it's just money burned down in the trash.
@MyPlayHouse
@MyPlayHouse 4 месяца назад
Well there is a chance,,, :-) sometimes you find something that is okay.
Далее
Hidden Hazards of Halogen Lamps
9:58
Просмотров 337 тыс.
How to convert a halogen floor lamp to LED
4:31
Просмотров 7 тыс.
The cheap Chinese bulb that won't turn off
10:27
Просмотров 10 млн
Wymiana żarnika na led
8:26
Просмотров 7 тыс.
Cheap digital microscopes - are they worth it ?
22:06
Просмотров 1,5 тыс.
Don't try putting this light bulb in a normal socket
7:10
Bombilla R7S LED Cristal 10W led-cost
0:45
Просмотров 51 тыс.
Ebay LED floodlight scam warning.
6:35
Просмотров 2,8 млн
Треш ПК за 420 000 рублей
0:59
Просмотров 239 тыс.
Choose a phone for your mom
0:20
Просмотров 7 млн