yes my KAC PDW has complete RA tech trigger box. I have been very satisfied, however, the complete box from the m4 does not fit directly in, but it is quite easy to get it to do so. I have not had any problems since I threw it in, and for some strange reason it has gotten much better in cold weather than it was before, but maybe there was just something wrong with my pdw and cold weather. But what happened right at the end of your video?
I've had the Hephaestus Steel parts installed but it didn't work properly. The hammer wouldn't drop most of the times so I went back to the original parts.
yep i have steel trigger from ratech in my M4, i bought it with gun so on stock trigger i shot only few hundred rounds then i changed it and im very satisfied with that.
i'Ve installed Ratech Products in My WE HK416, G36K/C the, My friend'S Scar-L. some model need you to trim down the trigger because of it have a different dimmension compared to original one. ratech one a bit thicker and keep the original valve locker, Usually u need to keep to use the original valve locker to make it work You can set how far you trigger reset by adding those foam tape below the trigger on the side that touch the base of the lower receiver the angel custom one is more accurate and well made imho
I have one in my we scar. Got it September 8th 2022 and the semi stopped working November 6 2022. Now it has the double shot problem as well as full auto in semi auto.
I got the Ratech Trigger set in my WE SCAR H, got the set with the valve locker etc, waste of money, didn't work, had to use the original locker. with that it worked fine though
its been 7 years last time I bought those sets, looks they havent change the design hahahahah. that is true, I also had to change the valve locker to the original one.
I heard that there are some batches of ra tech full trigger sets where they install the hammer sear backwards. So take a look at that maybe that will fix it
I installed the we tech trigger set, but sadly i have some issues, where the trigger is too sticky so when i pull trigger i have to push it for it to actually reset...
you should check your trigger...normally it should't go on safe without the hammer cocked i have this replica stock...it works or is this because you modified the full-auto parts? :P and yes...this is one of the few RA things that are actually good...the only misery is that they are disgustingly overpriced...as always i got a secondhand G36 with Ra trigger...it was the best deal i ever had if you can get them at a decent price they are just perfect
