RadioLink AT9 with Naza in Sbus

Подписаться 1,3 тыс.

Просмотров 40 тыс.

50% 1

Radiolink allowed me to release the BETA versions of the firmware for both AT9 and AT10. Please be aware that if you choose to test the BETA versions, you are doing it at you own risk. I've been testing the firmwares and they are OK. No problems what so ever.
AT9 default firmware
www.dropbox.com/s/otf1xs0fsjv...
Latest AT9 firmware V1.2.6
www.dropbox.com/s/fgjkrdgo3d5...
AT10 default firmware
www.dropbox.com/s/qeon8cjhrgk...
AT10 latest BETA firmware
www.dropbox.com/s/ndgfsnjggvc...

Наука

Опубликовано:

4 сен 2015

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 52

@tx2sturgis 8 лет назад

Thanks for this video...I'm going to be ordering all the parts for an F550 build. I was curious about the RL AT9 and your video was quite helpful.

@72launchpad 8 лет назад

Thank you so much for this. My setup was not working at all and once I saw this video had it operational in 30 minutes!

@TommyDrone 6 лет назад

Your videos are super helpful. Thank you so much!!!

@student6045 7 лет назад

Great Video and thank you. I just purchased everything you have shown and this will save me so much time.

@markm04021979 8 лет назад

Hi Sergio, thanks for this great tutorial on how to set up the AT 9 with Naza!!! I've just completed all the steps and it is working just fine. rgd, Mark

@dmitriysmirnov2722 8 лет назад

Thanks a lot for this tutorial!!! I have just bought naza and AT9 and I'm total newbie. But after watching this video everything is clear. Thumb up!

@OzFPVflyer 8 лет назад

Excellent video Sergio. I just received my AT9 from Helipal with the new Storm 6V3 Hexacopter and Naza m lite. I have to say the AT9 is great value and easy to navigate for adjustments. When it arrived I noticed it was setup on Sbus from Helipal. As I have not used Sbus before, I searched youtube to see what the setup was with the AT9 receiver to Naza so I can just buy another receiver and setup another quad or hexacopter. Your video is of great help and very informative and no doubt easier for people to start using the AT9 and Naza.

@Juary70 8 лет назад

+OzFPVflyer Thank you. Glad to have helped.

@rural-geek 7 лет назад

Thanks a lot for this tutorial video ! I was able to configure my remote control AT9S binded to an F550/naza M V2.

@QuadroRC 8 лет назад

Love your works!!! Thank you

@Juary70 8 лет назад

+QuadroRC Thank you.

@NMCFPV 8 лет назад

Great videos! Thank you!

@uglyduck8378 8 лет назад

Great as usual!!

@ninoibrahimpohan3269 6 лет назад

Thanks for the video very helpful :)

@cristianegro12 3 года назад

awesome videooooo thanks so muchhhh

@pshereves 7 лет назад

you are the best man thanks very much

@seankim1944 6 лет назад

good video. thanks

@BirolAkkus 8 лет назад

Hi Sergio, thank you for your very informative review. I might just make this exact combination following this. However, I was wondering what frame you have on display here. I was thinking of assembling the flamewheel f450, but your frame looks better, to be fair. Thanks in advance. Cheers, B

@3goldfinger 8 лет назад

Helpful video thanks. Have a question. Trying to set up Naza V2. When I connect the power I get a solid green light, nothing else. Any idea what is going on.

@ionutdeji2388 7 лет назад

Thank you for the video. How did you connect the Naza to R9D? Do you need an Sbus inverter? Or i can just remove the nose of the connector and slide it in?

@fransgeeraert6487 8 лет назад

Hello Sergio, i have an AT9 with Naza-m V2 for my Spyder 6. I'm having some troubles with the failsave. The failsafe switch works fine but when i turn my transmitter off it doesn't return to failsafe. I did not fly yet, just testing my controller. What could be the cause?

@rcflyer327 8 лет назад

with the sbus configuration how do i add a gimbal controller pan up/down add retracts ,,, up/down or can it be done

@mtba102 6 лет назад

Can tilt gimbal control be used instead of IOC or gains for X1 or X2 using s-bus?

@jhohanterz212 8 лет назад

Hi Sergio, I have a problem with my Hexacopter 550. Yaw is configured with DJI Naza m lite and RadioLink at9, but when it starts to rise is going sideways and fall. It acts as if you ordered from the rc. This installed by traditional and have calibrated all, gps, stiks, still the problem persists. Please help me.

@smithington1996 8 лет назад

perfect video! been looking at using this transmitter for an ongoing DJI F450 Build with a NAZA-Lite FC and this video is sooooo helpful! Quick question: assuming I set up the kit as per the video, how would I go about connecting up a 3-axis Gimbal? (apologies if the terminology isn't perfect, I'm completely new to all of this, I think i may be in over my head but we shall see!)

@Juary70 8 лет назад

+Dan Smith Hi Dan. Sorru for the late answer. If you want to use a 3 axis gimbal you better use the conventional connections because the Naza, when connected in Sbus, will only recognize channels 5, 6 and 7 for the U, X1 and X2. Now because the R9D will only output PWM on channels 5 and 6 when working on Sbus, you cant use those channels for the gimbal. Either you use conventional connections (PWN) or get a Sbus to PWM decoder. I know that FRSky has one that can be programmable but I don't know if it will work with RadioLink Sbus. Best Regards.

@smithington1996 8 лет назад

+Sergio Pereira thanks for the really informative reply! i got a two axis gimbal connected up a couple of days ago, hooked tilt control up to X1 and got rid of IOC, i've been flying for about 2 weeks now and the only time I used IOC i got very disoriented and crashed! works perfect!

@willsather 8 лет назад

+Dan Smith , + Sergio Pereira . Hi! I have been watching this video over and over and still can't figure out the gimbal controls. I have a 3 axis gimbal but I am only interested in the tilt function. I read Sergio's comment but am still confused how you did it. I currently have a DJI F550 with an AT9. In theory, I would like to use X1 or X2 to control the gimbal'a tilt. I don't feel like there is any needs to use IOC or Gain control with the VRA or VRB. I hooked up the gimbal pitch wire to Naza V2 in the F2 port and I just can't figure it out. Can I ask how you successfully hooked X1 to the gimbal tilt. Thanks for any help in advance

@360Planet 8 лет назад

Please help. All works except for compass calibration. flipping switch E 6-11 times does not enter calibration mode (ie solid yellow light) any tips? from anyone?

@BrentCartwright-DocsLabAudio 7 месяцев назад

Will this work the same with Naza M V2? Im rebuilding a storm 8 drone. Thanks.

@abdurrahmanwahyuutomo1723 5 лет назад

anjirrr,kerem biuddd

@geovanebarbosa4831 8 лет назад

Do you know where can I buy the gimbal left (sticks of throtlle).

@jonathanteles1357 8 лет назад

Boa noite. Penso que falará Português. Gostei do video e está-me a ajudar a entender melhor o meu drone, que adquiri esta semana. No entanto na parte da calibração o meu E nunca fica no meio. O que poderá ser? E será por isso que depois os motores não ligam? Se puder ou souber ajudar-me agradecia. Cumps

@asavideo 5 лет назад

Hello, beautiful video, in s-bus mode, how do I calibrate the esc.

@400tf 7 лет назад

good day, how can I connect the retractable landing skid in my TAROT 650? and also the gimbal thanks,, your video helps me alot, I'm a bigginer in quad diy,, more power

@Quixpeed 8 лет назад

big thanks for the great review, i'm just wondering if this radio saves more than 1 device? because i'm intending to get into RC and this is going to be my first and long time radio, is it worth it?

@Juary70 8 лет назад

+Quixpeed Hi. Thank you for your comments. Yes it will save more than 1 model. It will save settings for up to 15 models. I think it's a good entry level radio. I've never had any issues with this radio.

@400tf 7 лет назад

good day,, do I have to download the driver of naza? may sticks doesn't respond in anyway,, I follow your steps,, tnx

@skyu74 4 года назад

What is the drone's frame model in the video?

@bonitamahan 8 лет назад

Thank you so much for posting this. I just installed the naza lite and got everything calibrated but now my drone doesn't start up. I just get a blinking red light. What did I do wrong?

@MrJarrod 8 лет назад

plug into naza assistant and calibrate your sticks restart quad

@michelvanmol244 8 лет назад

Hello, i have a CC3D flight controller and a AT9 transmitter. Can't find a set up with S-bus. Also the wire connection is a problem .( want to use only the signal wire from the ESC's and power from a BEC.) Can you help me out?

@Juary70 8 лет назад

+MICHEL VAN MOL Sorry I don't own a CC3D FC so I can´t help you there. Best regards.

@ardvark84 7 лет назад

Does anybody know why I can't make my AT9 and R9DS work with Emax Skyline 32 flight controller? In cleanfligh I can test motors, gyros etc but quad is not reacting to the transmitter. Receiver is in S-Bus mode because it is PWM. Please help me guys!

@ardvark84 7 лет назад

***** Well... I know that now. Got different receiver too.

@silverman6019 6 лет назад

how did you get the driver to work on windows 10

@j3fron 6 месяцев назад

This fc very funny It automatically going into failsafe when turned off even without any setting on it!! Of course with this at9 tx Dunno why??

@geovanebarbosa4831 8 лет назад

Did you use naza lite or naza v2, and how much your range with this radio? Thanks.

@Juary70 8 лет назад

+Geovane Barbosa Naza Lite upgraded to V2. Never went out of range in flight so i can't get a accurate number but i've seen people going up to 4 kms with stock settings.