Radiomaster MT12: Set Steering and Throttle to CH1 and CH2 "Car Radio Type" 

You are welcome - Then watch out, today or tomorrow I will upload a video comparing the two new awesome budget 8/10 ch radios with display HotRC CT-8 and DumboRC DDF-350 in detail ;-)

Thank you. No, unfortunately not. Did not try Spektrum so far (even if I fly my helis and planes with Spektrum ;-) ) - I am also only a noob in EdgeTX and still learning.

Model - Setup - scroll down, there you will find it

@@donaldsneffe hi Donald .. thanks buddy for the help . Actually it something strange as many users interface are different than others depending on where and when they bought their radio from . Mine interface are different than you in some screens for sure , the same goes with a tuber named Chad fpv specialised in long range fpv cars .. any way my device failsafe page location is located as follows: First you must bind Trx & Rx in the car normally , after all good while everything is on go : SYS - Expresslrs - then Expresslrs script with roller buttons push - go down unit ll seeing ( Other Devices ) - then failsafe appears . I know it’s different, and why it’s like this from a device to another . Thanks again man 👍🏻

@@emptyqrider It is super complicated, everything. Also depending on if you have ELRS or 4-in-1... I am a noob, too - and have many problems programming and setting up the simplest things, which take few seconds in my other radios. Additionally there are mostly several ways do to the same thing (function), and if in forums (the forum I use) someone shows how to do something you can be sure, another user, a "prof", will tell a different, better way...

@@donaldsneffe i agree .. it’s too complicated but they placed a manual online describing details in simple yet not 100% perfect. Thanks for your help and inputs. Already subscribed to your channel .

It is only for future models. Did you check in a new model? In the preset models order will not change. I deleted all preset models.

@@donaldsneffe I checked a new model! I deleted all the preset models! Nothing changed, CH1 steering wheel and CH2 throttle remain.

@@mpampiskokkotis4205 Check the video again and follow the instructions exactly. You are the very first person I hear from that this does not work. There are many people (in the forum I write) who did this, nearly every MT12 owner, and it worked for everyone so far. Maybe you missed something?

EU version with reduced Watt

It will also have less radio protocols loaded

@@heady2008 Yes, this is true. I had to flash it with the int. firmware to get all protocols available.

@@donaldsneffe I just ordered the non EU FCC version. Fed up wlth all the meddling by ill informed governments. Certainly won't be complying with any new rules re Remote ID. Can't see the police trudging up the footpaths to my slope soaring sites to check