Railroad track into homemade anvil.- With angle grinder - 

I made similar anvil about two years ago, and have found this shape to be useful.
If you have been following me on instagram, you might have seen it.
Tools and abrasives used:
Metabo WE 2200-230 230mm angle grinder with 2mm thick 3M cubitron 2 cut off wheels. For making the cuts. Making all cuts took about 3 wheels.
Metabo WEV 11-125 Quick 125mm 1100W angle grinder with 3M cubitron fibre disc. For rough shaping and smoothening. Used two 36grit wheels.
METABO W 750-125 125mm 750W angle grinder with 3M Roloc pad.
Used: 60,80 and 120 grit Roloc cubitron papers. Two pcs each.
Brown, red and blue 3M Scotch brite finishing pads. One pcs each.
Anvil was made during two days. Overall time used about 8 hours.
Cost of abrasives used 60$
#anvil #homemade #diy #3M #Metabo #Theotherfinnishguy #railroad #rail #track #grinder #anglegrinder #metal #metalwork
Esittäjän Audionautix kappale Whatdafunk on suojattu lisenssillä Creative Commons Attribution 4.0. creativecommons.org/licenses/...
Artisti: audionautix.com/

Хобби