#Ram #DoubeDIN #Metra
In Part 30 of the Ram Revival we modify the subdash for our Kenwood Double DIN.
Time Stamps
@0:00 Intro
@0:20 Metra Double DIN Install Kit
@1:00 Remove Shaded Area
@4:00 Projected Cuts
@4:30 20 Year Double DIN Kit
@5:00 Recap of Known Installs
-People are cutting the roof of the radio cavity
@5:55 Top Cover creates contact
@6:40 Test Fit
@8:00 Hindsight Advice
-Trim the dismantled dash on a solid work surface
@10:00 Cutting Tool Options
@10:57 Bezel Preview
@11:55 Cut Template Orientation
@12:40 Finish Bezel Preview
@14:08 Harbor Freight Rotary Tool Kit
-Putting it to the test here
--Spoiler: Their cut off wheels suck...basically blow up instantly
@15:05 Prep your install and it will save time in the long run
@15:28 Craftsman Rotary Tool
@15:38 HF Cutoff Discs
@15:50 Hazet Pocket Scraper
@16:25 Cut Tests
-HF Rotary Tool Discs Explode Quickly
@16:45 Grinding Tip
@17:00 Sample Cut
@18:06 Pulling the Piece Out
@18:29 Flex Point
@19:33 Test Fit with Floor Cut
@20:00 The Top is the Issue
@20:56 Yesterday's Carnage
@21:33 Marking the Top for Cutting
@22:18 Head Unit's "Lid" Line on Dash
@24:00 Careful Cuts...Keep the Duct Surround intact
@24:30 Make a Stubby Rotary Tool!
@25:13 Slow Speed Cutting (Time Lapsed)
@25:27 High Speed (Gets Plastic Too Hot)
@26:21 PPE as always
@26:35 Cut Progress
@26:52 Channellock Cable Cutters and Wiha BiCuts
-Used these to trim some plastic
@27:10 Plastic Roof Removed
@27:25 Centered Reinforcement Rib
@27:35 Double DIN is Clearanced
@28:06 Cut Carnage...
This is what is required for the Double DIN to clear
--I would suggest trimming the ceiling FIRST if you are installing a true Double DIN
@29:32 Rotary Tip performed the best
@30:33 Sand/File Cut and Edges and Shop Vac Debris
@30:40 Pallet Work Zone
@31:00 Instructions for Bezel
@31:24 Cut Template Orientation
@32:20 Sharpie Trace
@33:40 1/2" Material per Side
@34:20 Trying to Avoid Backfill
@35:26 Make 5 Holes across the line
@35:45 5 Holes to try and mitigate backfill
@36:45 Testing the new approach
@37:57 Plastic Wrapping
@38:27 Progress Point (Cut Off Wheel)
@39:24 Cutting
@42:24 Pulling Top Cut
@42:48 Finish Trim Test Fit
@42:57 Bezel Complete!
-Great match between the LMC Bezel and Metra Finish Plate
@44:15 Factory Bezel vs LMC Bezel
-Factory is higher gloss with less texture
@45:13 Bezel Wrap up
@45:29 Subdash Trimmed (and Sanded!)
@46:30 Wrap Up
@46:58 Double DIN in Modified Dash and Bezel!
@47:40 Conclusion
*Alpha Gloves*
Get my gloves! Use Discount Code "LoneStar" for your own pair of Alpha Gloves:
alphagloves.us/
**Links**
Forum: www.lonestarmopars.com/forum
Facebook: / lonestarmopars
Instagram: / lonestarmopars
Twitter: / lonestarmopars
Music:
"Gearhead" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
creativecommons.org/licenses/...
8 авг 2024
