In this video you can see pilot Laurence flying her 1/6 scale CM170 Fouga Magister in Red Devil scheme at the EDF meeting in Wey, Germany on June, 11-12, 2022. It was the 3rd flight only with this plane.
RBC kits Fouga Magister:
rbckits.com/sh...
WEMOTEC EDF unit:
shop.wemotec.c...
Build log:
www.rcgroups.c...
Technical recap figures of this specific plane:
Dimensions: length: 164,5cm, wingspan: 199cm, height: 41cm, wing area: 48,5dm². Outer wing length for transport: 67cm. Transport dimensions in custom cradle: 165x40x74cm
Loads: Wing load 104gr/dm². Cube load: 15. Power load at battery:28,5V x 105A= 2992Watt. 33% equals 997W effective power, :5,08kg= 196w/kg Power load
Weights: Fuselage:2911gr+canopy 341gr+ 3batteries: 968gr = 4220gr
Wings: L 409gr, R 407gr
Total empty: 4120gr. Takeoff weight: 5080gr. Thrust to weight ratio: 0,65
Batteries: motor: 2xGens Ace Bashing 4S5000 60c. Rx: LiFe 2S1700
CG:: 14cm.
My initial throws: Ail: +20/-15mm, Ele: +22/-18mm , Rud: +-20mm. Combined in V-tail +35/-30mm. Flaps one:15mm, full flaps: 35mm
Power unit:Wemotec Midi-Fan-evo-Impeller-HET-650-68-1600 Fan: 11blade 415gr
ESC: Phoenix ICE2 HV120 (83gr). BEC: CastleCreation 10Amp
Servos: Ailerons, V-tail + NWS: Corona CS939MG 2,5kgcm analog.
Flaps: Spectrum A5040 4,5kgcm digital. Retracts: Freewing F4 maingear Type C
Expos: ailerons: 20%. Elevators: 20%. Rudder: 0% Nose wheel steer: 80%
Mixes: Aileron and elevator: 50% each into V-tail. Aileron to rudder: .. Flap to Elevator: ..
Paint: Black: Vinyl Grafi SC1002, Yellow: Vinyl Stare (SC022?)/Humbrol gloss69, Red: RAL 3020/ Humbrol gloss19
#RFMC #Wey #FougaMagister #EDF
21 окт 2024
