This RBR/C rock bouncer frame chassis was bought as the full kit from Banggood.
Link: www.banggood.c...
It was delivered fully assembled but I dismantled the axles so that I could check for grease and loctite. The axles were well greased, but some of the grub screws needed loctite, particularly the drive shafts. Finding steel gears that had been set with shims was a very nice surprise.
I had one of these before bought as the bare frame, this was VERY out of square and inaccurately made. This frame was a little better, but not really up to the standard I'd expect of a fairly expensive set of parts.
The gearbox included gives fabulous ground clearence and a flat belly to the rig helping prevent hangups when crossing obstacles, however it is much too high geared for a rock crawler and it makes it very difficult to have low speed control.
The included servo is quite weak, I don't expect it to last long, but it is doing the job for now.
Tyres are the excellent WPL V4's mounted on composite wheels made from V4 inners and 1/16 truck wheels.
www.wpl-rc.com...
6 окт 2024