RC ADVENTURES - AXiAL XR10 ROCK CRAWLER - BUiLD SERiES - PT 5 - FINAL BUILD

Просмотров 109 тыс.

% 455

The 5th and Final Build Video of the RCSPARKS / AXIAL Racing XR10 series ! It all comes together in this video and showcases all of the sponsors and a great Crawler. Thanks Axial, Team Tekin, MaxAmps, Punk RC, and Eastridge Hobbies! You made this "how-to" project one to remember!
Come visit me at the RCSparks Studio Forums. I would be happy to see you there!
www.RCSparks.com/forum
Look Me up on the Google+ Network!!
plus.google.com/u/0/112302991003386991511/posts .
RC ADVENTURES™/RCSparks Studio™ © 2013 Medic Media Productions Inc.. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world - is strictly prohibited without prior the written consent of Medic Media Productions Inc. Please note that the RCSparks Studio does not sell RC Products. The RCSparks Studio an independent promotor of a great hobby! I am not directly affiliated with any of the vendors or manufacturers in this video. the RCSparks Studio is not liable for any damage or loss through the use of products or techniques shown - Use at your own risk! This film and the RC ADVENTURES film series on RU-vid is intended for entertainment purposes only.

Наука

Опубликовано:

20 сен 2010

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 70

@2008calander 14 лет назад

I think the XR10 was worth all the hipe. Ive got a MOA rig now and can't wait to save enough for another build. The buid videos were perfect. Love the 1080p and tutorials.

@Reaperz642 14 лет назад

Sick build Djmedic, looks like its going to be a awesome crawler.

@plorwax 14 лет назад

again, better than i expected. great job! and can't wait for the demo vid.

@remotecontrolaholic 14 лет назад

wow you're really smooth and detailed! i could never do this sort of thing without getting confused

@nath0987 14 лет назад

WOW!!!!! i love it. looking forward to the running videos

@traxxasslash26 14 лет назад

good job medic! hope you had a great time building that XR-10! :D

@xXShadowRejectsXx 14 лет назад

Yay! nice job MediC! now time for the rocks! hehe

@ColesCarRevival 14 лет назад

oh my god it looks amazing with that body!!!

@Fuktupratbag 12 лет назад

great clip on de-anodizing the rings. easy instructional. by the time I actually buy a crawler I'll have a good amount to knowledge about how too's I liked the waterproofing clip too. I can't remember the name of that goop you use but it does that job.

@CarminesRCTipsandTricks 6 лет назад

I HAD to go back and see THIS!! Sweet MOA Rig!! Been a long time since I had one... WHERE'S Part 4???? Carmine 🚂

@correa825 14 лет назад

Nice vid looking up the test run :)

@2fast65 12 лет назад

Great videos verry helpful know i am not so intimidated on asembly i have don a couple of other trucks not any rock crawlers thanks and looks awesome with the chrome body!

@deadeye120596 14 лет назад

haha i like the music and description..it just sounds awsome :)

@KaotikRC 14 лет назад

Awesome build man! Looks super sweet! One question though.... & I'm sure others are wondering this too: Where's the running vid???? C'mon man.... Give us junkies our fix! LOL ;) Great video series, as always bro :)

@maxpower700 14 лет назад

i also put the tyres like that. and that is because of the reason you don't on 1:1 cars. on the 1:1 you put them the ''right' way, to get more area when youre braking. In other words, to stop. since the crawler arn't going specially fast, and could use the extra grip it will get, i mount it the way you have done =)

@littlewill9937 14 лет назад

nice man. im doin a ax10 build in about a week havent decided if i wanted to film it or not but we'll see haha.

@ColeF4 10 лет назад

Where do i get one, i'm in love with it and need one. If anyone can help me out that will be amazing!

@Hpj007 12 лет назад

@sammichmanjr you can use a 2 channel radio if you wanted. just need a y connector on the throttle channel on your reciever is all.

@rdpancake 6 лет назад

wow old vid but i hope i get some help . i am building the same rig with the same esc's but i am running the futaba 4pl and was wondering if you had to dis able one of the esc's bec? or did you just plug them in ch 2 and ch 3 ?

@afrog2666 6 лет назад

Old post, but hey.. Backwards chevron=good for crawling and trailing, forward chevron good for speed and wet conditions, as the "arrow" serves to clear mud and water etc away from the tire, sending it outwards, keeping the wheel on ground giving grip. But rev up a backward chevron and the wheel will lift off of any mud, snow, water etc, so: Speed=forward chevron Low speed=backwards chevron

@whydoihavetocry 14 лет назад

awesomeeeeeeeeeeeee

@Jakefrc 13 лет назад

@dirtnasty88 That depends on what you want to do with it, The xr10 is a better crawler by far but the summit is a basher that will crawl a little.

@Origam-I 11 лет назад

...so AWESOME, it will be too good if ya can tell me if they fit on the mini e revo ... i'm fond of those beadlocks ,no glue,just screws :-)

@cwbjustin 14 лет назад

nice build ,but I think your rear lower link is upside down i might be wrong the slider is up instead of down

@TheSavageKingTSK 7 лет назад

Love rc cars and can you show us how to make a rC car water profe

@elchilango1981siny 11 лет назад

other cuestion how much weight you recomend on front and rear i have xr10 ? thanks

@stevonr 13 лет назад

hey medic i'm new to electric motors can you explain or better yet show me how you wired up the esc's and bec unit?

@sammichmanjr 12 лет назад

Hi! I just ordered this kit today and I'm concerned. I don't plan on doing any comp crawling, just messing around. I'm on a budget, and planned on using a 3-channel radio. Is there a way that you can show us how to wire up the 2 motors to one ESC? I've heard of stripping the wires on one of the motors and soldering the other motor's wires to that, but I'm skeptical. Great videos and keep up the good work! Thanks!!

@3chasemanges3 11 лет назад

if you dont mind around how much did it coast you to put together your xr10

@Moneygrip 13 лет назад

Dude it seems like there are no kyosho rock force builds can you do one plz because I don't get mine for a whilw

@elchilango1981siny 11 лет назад

GREAT VIDEO I BUILD MY XR10 AND LET ME TELL YOU. IS A GREAT CRAWLER I HOOK UP WHIT MY FUTABA 4PKS IT DOES EVETHING YOU WANT .. GREAT VIDEO GOOD JOB !!!!!!

@BGDHP 13 лет назад

Is very nice

@TheSwitchbackRiders 14 лет назад

Wow buddy, that thing looks even better then I imagined. The chrome really brings it to life. Great choice. Im curious though, If someone were to buy this with the exact same setup you've got here, what do you figure the final cost would be??

@MrBajaboy5b 14 лет назад

@djmedic2008 ok thaxs :) what type of BEC do u have?

@mechqeust 13 лет назад

heyy medic you know how you have a bernzomatic could you make a video on how to light it?

@TheBrad9322 11 лет назад

but if there is weight in the front how would it help it? wouldn't make it heavier thus not let it climb?

@evotuc 13 лет назад

Forgive me for being ignorant, but, why do the weights specifically get added only to the front wheels?

@hornerable 12 лет назад

this kit is now 139 free shipping at a main hobbies great deal im going to grab 1

@MrBajaboy5b 14 лет назад

do u have to cut the red wire to the rec from one of the ESCs so it dosen't blow up the rec?

@kingkong101184 12 лет назад

did you drill an air hole in the wheel?

@elbergron 14 лет назад

hello medic looks real mean machine you have there.-very very very good video's bro! i think axial just killed the nemesis- losi comp crawler with the xr10. and perhaps it will kill bergs out there on the rocks..........makes me think of buying one myself.

@portalex007 14 лет назад

cool...

@lordraptor11 6 лет назад

yeah i would just use an old novak super rooster for my dual motor applications

@wtpjustice100 12 лет назад

Could you please do a build on an AXiAL AX 10?

@myo92x 12 лет назад

you have the links wrong. the aluminium should be under the axle not over.

@aussiebloke1914 13 лет назад

How can you make the XR10 Water proof because i am making a course and it has a water feature/section in the middle and i don't want to have to buy new electronics or anything like that please help