No video :(

RC ADVENTURES - HUGE 3D printed Snow Blower - Kyosho Blizzard - Spyker Workshop

Подписаться 3,7 млн

Просмотров 291 тыс.

50% 1

Click to Subscribe! ► bit.ly/JOovvU - What a great looking RC innovation. I purchased this snow blower kit last year (end of season) for my Modified Kyosho Blizzard SR. Over the summer, it sat on my project bench - but now that the winter is here.. its time to break it out and start completing the assembly. In todays video I introduce the viewer to this neat 3D Printed Snow Blower from Spyker Workshops. I have had most of this unit assembled during the ordering process, but I must complete some specifics. My goal in this video is to get Spyker some well deserved brand recognition.
Here is where I purchased the kit: spykerworkshop....
Lots of cool videos from Spyker on their website. Follow Ryan along with his experiment: / thegreatestmoo
Here is a great article about Ryan and his innovative design: www.3ders.org/a...
I think that the ability to use micro Radio Controlled robots to complete "menial" tasks such as removing snow - can not only be fun, but functional. We are on the eve of a new generation of human and machine - a partnership that can be understood!
Products used in this video:
Tekin 35t Brushed Motor (HD) & FXR
Savox Waterproof Servo
RC ADVENTURES™/ RCSparks Studio™ © 2015 Medic Media Productions Inc.. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world - is strictly prohibited without the prior written consent of Medic Media Productions Inc. Please note that the RCSparks Studio does not sell RC Products. The RCSparks Studio an independent promotor of a great hobby! I am not directly affiliated with any of the vendors or manufacturers in this video. The RCSparks Studio is not liable for any damage or loss through the use of products or techniques shown - Use at your own risk! This film and the RC ADVENTURES film series broadcast on RU-vid is intended for entertainment purposes only. #RCAdventures #Modellbau #Winter #KidSafe #FamilyFriendly #RCTrucks #Tutorial #RC #Action #RadioControl #RemoteControl #RCSparks #Snow #RCToy

Опубликовано:

25 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 295

@rcclassiccrawlers4368 2 года назад

Such a cool accessory to have. I realize my comment is like six years old but I’m catching up on all the episodes I’ve missed over the years. You could call it “being a loyal subscriber or just a guy that’s bored as hell”. Whichever one it is, it’s still a very cool accessory, build and video.

@jasonscheffler3436 8 лет назад

Man dude... The reason I've gotten into this hobby is because of you.. Getting friends together and having a ball with these things are great.. Everytime my phone goes off I'm wondering if it's going to be another awesome video from you.. Thanks for what you do keeping all of us entertained and informed...

@TheRealRCSparks 8 лет назад

+Jason Scheffler What an awesome comment, on so many levels! :) Thank you

@stinkymcnugs8545 8 лет назад

MIND BLOWN! I was telling my lady how a 3d printer could allow me to make cool RC things such as a tank-track and super micro parts for diy ultra micro cars and such. man this is Rig is incredible! and too funny that right off the first few seconds you got it exactly right, I was searching for one of your videos to put on while I wrench on my rc projects. you should make an RC crane and build a house with Lincoln-logs. I'm not sure that anyone has actually ever done that

@losiboy454 8 лет назад

My rc addiction is never satisfied

@tj84vinnie 8 лет назад

so cool, let it snow let it snow

@dylandavies7965 8 лет назад

I know a guy who made one of these a while ago! they are sick. I am putting skis on my slash with paddle tires for snow! great video

@LockRockRCs 8 лет назад

I love watching you work on RCs and talking. Its like having a friend right with while I'm wrenching or hanging just hanging out. Keep it up just don't hurt your back anymore.

@eatdatshoplifter4459 8 лет назад

i will get this to clear my sidewalk,poarch,driveway and patio

@thegreatestmoo 8 лет назад

SNOW BLOWER, OMG!

@TheRealRCSparks 8 лет назад

+Moo Spyker You Made it Bud! :) Awesome

@jodylance1767 8 лет назад

thats sweet

@jed6594 8 лет назад

Wow!!! That's AWESOME!!! Also is great that you akgnolage that while you work your viewers like to also work on our rigs. I always do that!!

@llandeldavila9406 8 лет назад

you should get like a showroom disc that you could put it to spin with your cars on it 😀😀😀

@wolfie2277 8 лет назад

Thanks so much!!! I just ordered the parts and awaiting delivery! You gave me the confidence and instruction to do this- thanks so much, and have a great thanksgiving

@Rctestingtv 8 лет назад

you have a nice rc channel better than all

@nicholaspoll7466 8 лет назад

When you start up the blower spray WD-40 inside the shoot and where the snow comes in so it doesn't get clogged. This trick works with full size snow blowers to. :)

@jduffy677 8 лет назад

could sure that badass machine right now, it just snowed 8 inches over night

@jkflorida 8 лет назад

RC Adventures=Best RC channel on RU-vid!!!

@TheRealRCSparks 8 лет назад

+JKFlorida There are so many amazing RC channels on RU-vid, thank you for considering me as one of them :)

@evanverret3150 8 лет назад

Cool little toy. The snow in my area is at least twice as high as that.

@stevenjans8045 8 лет назад

vary cool snow blower can wait to see it run

@csabagyarmathy6386 8 лет назад

WINTER IS COMING!

@Mrtojo 8 лет назад

That look so wicked! hope it do super in snow!

@2cwik4u104 8 лет назад

cool blower. looking forward in seeing it in action.

@rookie101_ 8 лет назад

That things huge !

@thestuffz 8 лет назад

to hide the electrics and batteries, there was a monster VAN body that fits the blizzard. might be something cool to make it even more unique!

@claytonplummer9509 8 лет назад

RCSparks - I want to see the snow blower in action!

@thegreatestmoo 8 лет назад

+Clayton Plummer Check out my channel, I have vids of it running!

@CatamanGMF 8 лет назад

Awesome snow blower for sure.

@awesomusmaximus3766 8 лет назад

Wow that's awesome can't wait to see it in action

@jadensanders3820 8 лет назад

its cool how u make all these awesome videos of u and ur buddies and family i wish i had a motorized rc

@masterbond9 8 лет назад

i know Spyker, not personally, but hes a cool dude.

@hughjanus14 8 лет назад

wow nice build cant wait to see it finished

@znovosad555 8 лет назад

I'm probably gonna put a plow on my scx10. But I love the snowblower concept!

@28gutzy 8 лет назад

Way to go, Moo. It works awesome for all the nah sayer's. Cleaning the sidewalk will never be the same. Lol

@thegreatestmoo 8 лет назад

+28gutzy Now if only people had more snow! I haven't seen any this year yet =(

@witterhemi 8 лет назад

that thing is awesome!!!

@DanielDzeta 8 лет назад

Awesome! Medic, please do the test video of that beautiful thing soon!

@TheRealRCSparks 8 лет назад

+Daniel Dz I will do my very best Daniel! Gotta wait for some good snow though :~) At least when it arrives.. I will be prepared!

@EverydayBasher 8 лет назад

Medic, you never cut towards yourself, lol, keep it realman, hope your back is doing good, my mom has the same problem, so i know how you feel.

@Jackrc1999 8 лет назад

Wow 320 views in 5 minutes and that's sick would love one

@liamcosgrave5410 8 лет назад

I miss living in Canada so bad

@NateB1976 8 лет назад

Really neat stuff there. I look forward to seeing how it actually works. The construction looks pretty darn amazing I give them that. Maybe you can now blow snow on your friends in the yard now.lol

@r.butler4007 8 лет назад

Medic you are INSANE!!!

@RcNickster709 8 лет назад

Great video Bud... Been looking forward to this video for a while.. I am way behind so I am just getting to it now.. BUT what a cool Snow blower attachment 1. It looks amazing.. 2 looks well made.. 3. Looks like it is getting all the proper motors in place that will make this thing work amazing... I guess that is it now? If this thing works half as good as it looks.... oh man!!!! This will fly off the shelves...... I've been keeping a close eye on these printed parts.....which to be honest I haven't seen much.. But after seeing this Snow blower? It's obviously come a long way or someone has figured something out... because it looks great.. So I will stop rambling now... lol Great video to watch while assembling my bead locks.... again!!.. thanks...

@thegreatestmoo 8 лет назад

+RcNickster Epic comment, thanks! You should check out my channel, I have some videos of it blowing snow.

@RcNickster709 8 лет назад

Moo Spyker Awesome!! I just shared on Google+.. Nice work my friend..

@im2tall1 8 лет назад

4 channels 1)steering 2) throttle(use a Y harness to tie in the front ESC/Motor snowblower,all the spinning will done be off the throttle channel and remove the red wire from the harness before you plug into the Rx ) 3)Your choice(track lift,or blower direction servo. 4) the same as "3" your choice (Bind: Use this to plug in the BEC(You can bind the Rx with a Rx pack separately).That should cover all the functions on 4 channels,I use the same land radio! Or if your feeling lazy,you can bust out a Heli/Airplane remote,and plug,and play,I'd probably use my DX9 just for the channels,you can add lights,motor noise,whatever you can imagine! Your Choice! :)

@im2tall1 8 лет назад

+im2tall1 You can also run a "Y" harness off the bind port for the BEC, one side will be for the BEC,and the other will be for the Bind plug!(The Bind plug Y harness doesn't have to be altered Plug and Play)!

@thegreatestmoo 8 лет назад

+im2tall1 It might be possible to connect both the blower motor ESC and the lifting servo to the same channel, so when you lower the blower the ESC turns on also, it would have to use only 1 side of the servo throw, not sure if it would have enough power to do that, worth experimenting. I personally use a modified 9X radio system with a smartieparts board inside.

@RCTanksTrucks247 8 лет назад

Wow! He has done a fantastic job Aaron. Looks great. Keep up the awesomeness

@Nickysix6 8 лет назад

THAT IS AWESOME

@trials_bike-xu3xf 8 лет назад

Yea I'm gonna have to take my slash out for some Colorado snow drifting

@PaRCQuadRacers 8 лет назад

Outstanding sir.

@dustingallas2009 6 лет назад

I am such a indoor clay track racer.. THANK YOU... That is so cool!!!

@voododd666 8 лет назад

Looks really good

@damedcamera 8 лет назад

i didn't know you had one of these! On my list for a while now. Need to see one in action.

@Cr125stin 8 лет назад

I think I need to get another blizzard. My last one was the heavy metal van

@raymondj8768 4 года назад

i just seen this on his channel it works killer !!!!!!!!!

@joedirt4971 8 лет назад

Guess it's time to paint the blizzard blue lol

@alijahlove6733 8 лет назад

keep making videos

@RCMarty 8 лет назад

Moo-Spyker's the man, Ryan's a freakin' genius to come out with such a cool apparatus !!!

@bumpy24 8 лет назад

medic, I love your rc vids so much you were the one that got me into hobby grade rc's! keep up the great work man.

@TheRealRCSparks 8 лет назад

+Bumpy24 I love reading that kind of comment ... awesome!

@avrahambrea1919 8 лет назад

that is sick

@Rc4x4trucks 8 лет назад

awesome cant wait to see it in action!!

@TheRealRCSparks 8 лет назад

+Rc4x4trucks me too bud :)

@RCKING1 8 лет назад

thats so cool cant wait

@evtek3962 8 лет назад

That thing is amazing

@garylowe8601 8 лет назад

I can see why that would be quite expensive. that would have taken a lot of time to print all the parts. not to mention R&D. Looks cool.

@calebkretzschmar6804 8 лет назад

nice I like the color combo

@DocterJones 8 лет назад

Looks soo damn cool! Like maybe I don't have to drop $$$ to get an RC loader to remove snow...

@ingis76 8 лет назад

Nice looking forward to see this thing blow some snow :-). Too expensive for me though ;-)

@ryanmaurer1092 8 лет назад

Hey medic I love your videos and how you make them. I used to ONLY like trail trucks but your channel has opened my mind to all kinds of rc in the world.

@fumonchewmon1899 8 лет назад

i love your videos

@TheRealRCSparks 8 лет назад

+Fuwmonchewmon We love you for loving our videos!

@fumonchewmon1899 8 лет назад

+RCSparks Studio when are you going to have a runing video up

@TheRealRCSparks 8 лет назад

Fuwmonchewmon as soon as I have some good snow .. that, you can count on!

@fumonchewmon1899 8 лет назад

+RCSparks Studio do you know of a good brushless system for a exceed rally monster

@mistreenae612 8 лет назад

+RCSparks Studio over here in Lubbock Texas, no luck on snow just rain

@mistreenae612 8 лет назад

dude, ever try making an RV trailer for RC trucks?

@declanthiele 8 лет назад

I cant wait to see it running!

@SHAYEN-cd5qw 8 лет назад

Awesome !

@SilverShux 8 лет назад

Very cool

@truedeadman 8 лет назад

very cool product! nice vid as usual Medic.

@caddywakk4082 8 лет назад

Very cool medic

@freemarlochip 8 лет назад

Put your original Front blade on the BACK, that way you have both at your disposal.

@cosworth34677 8 лет назад

Cool project

@heitnerjulian7941 8 лет назад

Awesome i Love this snow blower sorry about my englsh i am from germany

@iandoherty8835 8 лет назад

AWSOME

@andrewrichey7374 8 лет назад

I love it, Swwwweeeet !!

@toddolatheks.1328 5 лет назад

I watched but not satisfied I need more !!! Awesome video as always.. Perfect production!!!! Have you done a video on your production process??? U on that news feed that shows u hard at work,two monitors flashing schematic clips and you cut and pasting Awesome videos for us!,!!! That could be a winter video Project show us the truth about what happen in the editing room!?!?!?>???!!! Could be really cool! Thanks 🙏

@joeraygutierrez4598 8 лет назад

man bro that is so cool keep it up

@TheRealRCSparks 8 лет назад

+Joe Ray Gutierrez Im always keeping my eye out for something unique and fun to entertain you with..

@joeraygutierrez4598 8 лет назад

+RCSparks Studio well I appreciate it can't do as much rc anymore so i really enjoy your videos

@MxntiMedia 8 лет назад

i wanna see this in action

@thegreatestmoo 8 лет назад

+Cars&VideoGames Check out my channel, I have a few videos of it running.

@MxntiMedia 8 лет назад

+Moo Spyker sure thing!

@sethshealy6390 8 лет назад

l love you and your video keep going

@advancedhawky5324 8 лет назад

Nice looking great medic can't wait to see it up and running!

@mr.scott-gfr2153 7 лет назад

Nice i love it !

@FrankygoestoHobbywood 8 лет назад

Looks very good..!

@landykid 8 лет назад

my only concern would be used with a plastic hold up to the temperature that being said it does look absolutely amazing and am really looking forward to seeing it in action

@michaeldeering798 8 лет назад

PLA plastic is designed for a lower melting point for ease of use in 3d printing so I would think that would make it better for lower temps all the way around. not sure

@landykid 8 лет назад

The only reason I say that is because I heard that 3D printed plastic can brittle I'm not 100% though

@thegreatestmoo 8 лет назад

+landy kid The blower is printed with normal ABS plastic, should be pretty good, I live in Minnesota and in my videos of testing it, it was around 0F and it did just fine. I print the kits with a 0.6mm nozzle and low layer heights for maximum layer bonding strength, pretty close to the same strength of molded ABS parts.

@michaeldeering798 8 лет назад

thanks for sharing the info, one day Ill have the budget to get a printer myself.

@landykid 8 лет назад

Moo Spyker awesome insight I do not know a lot about 3D printing I just remember hearing at one point some of the plastic can be brittle. I must say though that thing works amazing looking at your videos

@jamesmeredith381 15 дней назад

I have a friend who is a custom machinists he does the best Mico work and we rebuilt mine from metal and I gave him the original one,

@nitroprime9714 8 лет назад

absolutely amazing....

@WS-gw5ms 8 лет назад

looks like a tmaxx differential in the middle of the blower

@baconbo11 8 лет назад

Man I absolutely love your videos. I've always wanted to have a little rc hobbie but I've never been able to afford it. Your videos keep me at bay for now haha

@theadventurebiker 8 лет назад

Very nice! Now let's see it in operation!

@TheRealRCSparks 8 лет назад

+The Adventure Biker okie dokie: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-W9S9s9-Bq7o.html

@cadenmahrt9426 8 лет назад

+RCSparks Studio how much is the snow blower cost.And can it work with different rc cares?

@davebom5924 7 лет назад

it cost 260 usd and here is a link: spykerworkshop.webs.com/snow-blower

@zachwhittemore8425 8 лет назад

That hing is AWESOME can't wait u take it out and see it in action love the vids keep it up. By the way I just want ur attention I really like ur videos and plz try to respond I really love rc adventures and all ur videos and just want u to see that. Thanks medic and plz respond

@ethan51300 8 лет назад

Awesome

@royjr.fisher2493 8 лет назад

awesome

@nitroraptor2 8 лет назад

they should make a mount for it to fit the summit

@gabrielrobles2323 8 лет назад

hello,is from Argentina

@bobmichael97 8 лет назад

That's a really nice blower looks like a really high resolution print must have took a long time to do just one side of the scoop. The blades aren't just a round plain print they've even got some nice teeth maybe to help break the ice. Look good and has some nice strength hope it take the cold well tho

@thegreatestmoo 8 лет назад

+bob michael The current kits being shipped out are MUCH smoother and nicer looking. This was one of the very first kits I sold at the beginning of this year, I've changed a lot since. This one was printed on blue tape and elmers glue, which leaves a rough bottom finish, most notable on the side and belt covers. New kits are printed onto a PEI sheet and they have a very smooth flat matte finish on the bottom now. Just FYI for anyone interested in ordering one! Functionally still the same though.

@KevinMillard68 8 лет назад

thats sick man i love it

@myrctribe6309 8 лет назад

Medic, it looks amassing! Kant wait to see it in action. Hop it snows so I can get my Wraith out! ;-)

@RCCrawlerz209 8 лет назад

Can't wait to see it in action! #HappyThankgiving! btw.

@wheelockperformance 8 лет назад

medic! You are my inspiration to get back into the hobby. Here pretty soon, I'm getting a traxxas slash! Keep up the good work, I hope there is rc workshop set up video soon.

@TheRealRCSparks 8 лет назад

+Billy Wheelock when I reach 1 Million subscribers.. i will do a shop tour for everyone ;)

@bumpy24 8 лет назад

+RCSparks Studio is the shop tour in your basement or the garage in the savage xs video?

@TheRealRCSparks 8 лет назад

Bumpy24 Guess you will have to wait and see ;) I am expecting to hit 1 million in February some time..