RC CAR Carburetor Repair - WALBRO WT 

Thanks George! I thought for sure it would have been too boring for everyone! Mate its winter here now, wish I could be over there racing in the sun with you boys!!

Thanks Legend!! really appreciate the support!

Thanks Mate!! really appropriate the support (and great videos too! your track looks mint 👌)

Thanks so much for the support, really appreciate it!

Hahaha thanks for the support legend!! really appropriate the questions and feedback!

Did ever do a bearing video for the carbs.

@EV TEK thanks legend!! and thanks for the share! are you running anything on-road?

Thanks Legend, really appreciate the inspiration 👊👌

Thanks for the support mate!!

Thanks James! I thought for sure no one would be interested! so glad the info came in handy. The bearings are 3/16 - 5/16 - 1/8 (ID - OD - width) the bit you saw in the video I made in the workshop! after I get the latest video wrapped up I'll be doing a video on three different DIY at home methods for installing the bearings! so keep an eye out... And thanks for the support Mate!!

Mark Thomasson Thanks will do.

Hey Mate, the bit you saw in the video I made in the workshop! after I get the latest video wrapped up I'll be doing a video on three different DIY at home methods for installing the bearings! so keep an eye out... those bearings on the throttle shaft make such a difference!

So amazing isn't it!!! it wouldn't happen without the love and support of people like you RC Girl!

miguel ferreira it’s called a reamer

Good to hear you're having a crack at rebuilding them mate!! Hobbies Direct have them in stock and express post for those like me who hate waiting for parts! hobbiesdirect.com.au/Zenoah-Walbro-Carburetor-Throttle-Shaft-Kit-T207081370?search=walbro%20carby let me know how you go...

Mark Thomasson Hi Mark, thanks for the info on the shaft supplier. Will keep you updated.

The spring rarely needs altering in cars, boats that run around at full throttle can benefit greatly tho. Walbro actually sell springs in different rates!

the bearings from 3/16 x 5/16 x 1/8 to drill is 5/16.... thanks

@George Specs - I'll detail and show 3 different methods in an upcoming video! it'll cover a couple of different options!

133levi 668 carb used up to 26cc engine and has manual choke 990 carb used on bigger engines up to about 30 cc. Maybe 32 cc. Has no choke I’m fairly certain this is correct but someone might be able to confirm

@Isaac Estrada start with the simple things first... 1. check the fuel delivery, the clunk in the tank might be blocked - disconnect the fuel line on the carby and blow back down the line (just use your breath) the filter / clunk might be blocked. 2. pull the mixture screws out and check the ends for damage 3. reset the mixture screws to default 4. check the vent hole on the metering side (I detail it in the video, fuel metering side) 5. haha if that hasn't fixed the problem, you better order a rebuild kit! If you have any more questions DM me on instagram - 76thomassonm

@@MarkThomasson76 thank you for the reply, I actually concluded that it was the engine I ordered a new piston ring and sleeve hopefully that'll do the trick thank you

It’s a pretty amazing little one way valve setup! Haha I don’t even really understand how they work?? Walbro should make them removable. Actually have you seen the new Mecatech carb?? Wonder what their doing for a one way? Check it out, looks AMAZING $500aud tho!!!!!!!!!!!!!!!!!!!!!!