RC Plane Designing Calculations, Making and Flight Test, RC plane made of Balsa Wood, Twins Motor

Подписаться 88 тыс.

Просмотров 21 тыс.

50% 1

Instructables:
www.electronic...
Subscribe to my New RU-vid Channel, if you want to watch my videos in Hindi/Urdu
/ @letsgetstartedd
Related Videos:
SU27 RC Jetplane making and Flight Test:
• RC Jet Plane with 2600...
Arduino LoRa RC Controller, 5Km Range
• Arduino LoRa RC Contro...
Diy Highly stable RC Plane designing and making:
• Diy RC Plane for Begin...
RC Paper Airplane making and Flight test
• RC Paper Airplane made...
Arduino RC Airplane
• DIY RC Jet Plane Homem...
Support me on Patreon and get access to hundreds of projects:
/ electroniclinic
sign up for a free account and download hardware designing and programming books:
amzn.to/2WeBCw1
***********
free Amazon Business Account:
amzn.to/2MiPiBT
************
Project Description:
********************
in today’s episode, you will learn how to design and build your own RC airplane. I will explain in detail how to calculate each and every part of the RC plane so that you can make smaller or bigger RC Airplanes. It really doesn’t matter whether you are using Balsa wood, Styrofoam, or other types of foam board sheets, or 3d printed parts, the calculations will remain exactly the same.
There are important things which I will also explain with the help of these 3d models, you can see this one is normal and to the other one the aerodynamics is applied. When you cut parts of the model it really affects the aspect ratio and interns it affects the RC plane stability. So, I will explain in detail how to keep the same aspect ratio even if you cut some parts of the RC Airplane.
Anyhow, before designing and making the bigger RC airplane I started with the micro version of the airplane to test my calculations and I was pretty happy with the results. Finally, I did calculations for this big RC plane. Don’t be afraid if I am using two brushless motors it has nothing to do with the basic RC plane designing. The reason I am using two brushless motors is that my RC plane is made of Balsa wood and it’s a little heavier. You can make the lighter version of the same RC airplane using foam board sheets. This way you can use a single brushless motor.
********************
Amazon Purchase links:
*****************
Best RC planes and Accessories
amzn.to/35XXpPN
Flysky FS i6 Transmitter and 6 Channel Receiver
amzn.to/363Cqez
Servo Motors
amzn.to/3c162wP
Top Brushless Motors
amzn.to/3tbAo5l
1000KV Brushless DC Motor with ESC
amzn.to/38zcZ63
2600kv brushless motors
amzn.to/36qOaYE
4-Hole Nylon Control Horns
amzn.to/38CK693
Push Rods and control horns
amzn.to/3cn8X1A
Push Rods 12.7 inches long
amzn.to/3tf5Hfr
Lipo Batteries
amzn.to/3cm0VWM
Balsa wood sheets for RC planes
amzn.to/2KAO0q1
Other Components and Tools:
Other must-have Tools and Components:
Arduino Uno, Nano, Mega, Micro "All types of Arduino Boards":
amzn.to/3fk5OTi
Top Arduino Sensors:
amzn.to/3vZbnfM
Super Starter kit for Beginners
amzn.to/3cq56C5
Top Oscilloscopes
amzn.to/3ctF3d8
Variable Supply:
amzn.to/2PEAqE7
Digital Multimeter:
amzn.to/2QGRPg1
Top Soldering iron kits: "best"
amzn.to/39nqDtb
Top Portable drill machines:
amzn.to/3suQMh7
Jumper Wires:
amzn.to/2NYPEDA
3D printers:
amzn.to/3ruG1dt
CNC Machines:
amzn.to/3cuZWVv
Electronics Accessories:
amzn.to/3sueV7z
Hardware Tools:
amzn.to/3m9UhaN
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I will receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for your support!
****************
Follow me on Facebook:
/ electronic-clinic-7697...
Follow me on Instagram:
/ electroniclinic
Email:
stu_engineering@yahoo.com
Related Tags:
#DiyRCplane
#rcPlaneDesignCalculation
#BalsaWoodRcPlane
DIY RC PLANE
RC PLANE USING BALSA WOOD
RC PLANE DESIGN CALCULATION
RC PLANE DESIGNING AND CALCULATION
HOW TO MAKE RC PLANE AT HOME
RC PLANE WITH 2600KV BRUSHLESS MOTORS
TC PLANE MAKING AND FLIGHT TEST
DESIGN CALCULATION OF RC PLANE
RC AIRPLANE DESIGN CALCULATION
RC plane made of balsa wood
balsa wood RC plane
how to make an RC plane using balsa wood
kfm2 type airfoil
2600kv brushless motors
twin motors RC plane

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 81

@ArinzePaul-qw7hq Месяц назад

You are a good teacher,l love this, Thanks

@Not_So_Weird_in_Austin 9 месяцев назад

Great explanation on how to all the determine dimensions when designing and building RC Airplanes

@amangupta1510 7 месяцев назад

Very nice and informative video to start off with building a rc plane

@HankJ8195 10 месяцев назад

Thank you for the detailed description of the calculations for the various components. I've been trying to find this info. Also appreciate that you explained calcs for a KFm 2 airfoil. Great video!

@ARMY_RUGS 3 года назад

best video so far after watching 1000 videos from so called professionals. thnx lots

@mingosutu 7 месяцев назад

Man, you are the best so far

@shanthigovindgovind6238 3 года назад

its great video for beginners u explained each and every topic clearly. thanks a lot

@electronic7979 3 года назад

Excellent project. I liked it

@ElectroniClinic 3 года назад

Glad you like it

@ahmedal-kanan721 2 года назад

@@ElectroniClinic Please make video about making calculations of weights, wing loading , cubic loading and choosing appropriate motor and appropriate prop.

@aberateklehaimanot9804 3 года назад

this video has brought me to the idea how to design an RC plane in the future,thanks a lot.

@ahmedal-kanan721 2 года назад

Please make video about making calculations of weights, wing loading , cubic loading and choosing appropriate motor and appropriate prop . This is the best designing video, thanks .

@rafaeltorres2886 2 года назад

your on your way ...Great Job😉

@anshuljayaswal9051 10 месяцев назад

sir i need to know how you synced the two bldc's together on channel 3 and matched their RPM too

@idrissandersondjoufack7887 Год назад

Thanks a lot this video really help me

@andreyl2705 9 месяцев назад

awesome)

@evansmichelo883 2 года назад

Can you provide a list of items needed to make an rc model and where to buy them

@showme13100 7 месяцев назад

Excellent content

@jalalhaider83 3 года назад

I have made glider sort of slow flying plane , now with all the electronic on board weight is almost 685grams, my battery is 3s 2200mah, so what motor and props you recommend, where I also need a longer flight time, so shall I go with 1000kv motor and 10.6inch prop or what? Would you guide me please

@Віталій-ц8ъ 9 месяцев назад

How did you calculate the centre of mass?

@Crookqt Год назад

Awesome, thank you

@ronirc 3 года назад

Very good

@evansmichelo883 2 года назад

Great video

@fatbubba2097 Год назад

I can't figure out why none of my rc planes fly. They are all light (made of foam board about 350g with batt), have a 700g of thrust motor (8060 prop), have large control surfaces and wing spans, yet they all take off, fly about 8-12 mph and have no control (rolling or vertical). I can even see the control surfaces working well with my controller during a "flight." Any ideas?????

@idontthinkso3224 11 месяцев назад

Try to make sure that your wing design make a difference in pressure so that it can fly

@orangetech8419 2 года назад

Please answer this Is there any consideration for nose length of aircraft? I mean how to fix the distance between the nose tip of fuselage to leading edge of the wing ?

@ElectroniClinic 2 года назад

watch my other video on rc plane, that's a highly stable rc plane. you will understand it completely.

@orangetech8419 2 года назад

@@ElectroniClinic hey I have another doubt regarding drone frame So we are trying to incorporate drone into an RC plane so to make sure there is no collusion between propellers of drone and fuselage can we directly take the frame length based on requirements or should we have to follow the considerations which we usually see

@fockewulf190T 6 месяцев назад

How much can it lift?? All up weight and playload weight it can carry?

@bdpeoples Месяц назад

Wing Area sqrm x 15 kg for small trainer aircraft.. See Wikipedia wing loading chart

@random_idRI 3 года назад

Klo dari foam board bisa terbang ga ya berat 1.5kg

@jeepoyfernandez Год назад

Hi how much thrust i need to fly an fixed wing rc weighing 1100hrams.???looking forward for you answer..

@SmartTronics 3 года назад

thanks a lot for upload main bhi banane wala hu isko dekh ke

@ElectroniClinic 3 года назад

ya you should

@सिध्हयोगर्षि 2 года назад

why chord length is 8 inch ? i have chainsaw engine worth 5 kg what should be the calculations or chord length ?

@TheC130navigator 3 года назад

How heavy of a payload can this airfoil type lift?

@shoodheshoodhe7903 Год назад

Human error in 4:15 12% times 8inches is equal 0.96 inches The vidoe error is 96 inches

@Mikinct 3 года назад

Question- How does one know what size motor &. Battery will work or what will be too heavy & not fly? Example: Hobby Zone sells a larger Aeroscout S2 1.1 foam plane & a smaller plane with smaller battery & motor. Could I take motor & battery from larger plane & install on smaller plane? Fly longer or faster? I could move battery so CG is good but are there weight limits to certain dimensions?

@ElectroniClinic 3 года назад

This really depends on the motor thrust. You can search on the google motor thrust vs weight.

@shakerileiwat4341 3 года назад

Great ♥

@shanthigovindgovind6238 3 года назад

i have a doubt, from what distance does the wing should be placed from the nose???

@ElectroniClinic 3 года назад

you will get enough space on the nose side to place the battery.

@ElectroniClinic 3 года назад

you can keep it 12 inches.

@RomeoSierraLimaMike Год назад

@@ElectroniClinic how do you get the 4 inches for the horizontal tail width ?

@daviddavids2884 3 года назад

at 7:50, rather than worry about the area of the elevator, its chord should be equal to thirty percent of the stab root chord. AND, the chord of the rudder SHOULD be the Equal to that value. googletranslate

@JetAi-qz4gy Год назад

Hi David, could I ask what wing type should I use for a rubber band propelled plane

@Honor2005g День назад

Urdu me upload kare plz

@gezencocuk3578 2 месяца назад

What's the cad called

@ElectroniClinic 2 месяца назад

SOLIDWORKS 2016

@daviddavids2884 3 года назад

at 2:07, the fuselage/tail boom is TOO long.!!!!! the total fuselage length Should be equal to, roughly, 75 percent of the wingspan.!!!!

@Minusliquid16 3 года назад

You again, what the fuck!

@daviddavids2884 3 года назад

at 6:05, and WHAT ABOUT the part of the fuselage Below the wing.!!!!!!

@daviddavids2884 3 года назад

at 6:21, it is CONVENIENT to refer to the wing. but, the referents are, actually, the cg and c-m. c-m is center of Mass. googletranslate

@daviddavids2884 3 года назад

at 10:27, if the WING does not make an amount of Lift that is equal to the auw, an airframe WON'T fly.!!!!!! this little, unbalanced, glider is HEAVY and its wing makes NO lift. in the case of a zero-lift airfoil, there MUST be, either, positive aoa at the wing mount, or NOSE UP moment, at the HORIZ-STAB. if you think you learned something, at this point, i DON'T KNOW what it would be.

@daviddavids2884 3 года назад

at 14:10, a servo is a SERVO. not a servo motor.

@daviddavids2884 3 года назад

at 12:07, so, you removed Too much material, and excessively increased the height of the vert-stab.!!!! it is Correct to use JUST five degrees of sweep, at the h-stab le. and the le of the v-stab should at a slope of 75 degrees.!!!!! googletranslate

@daviddavids2884 3 года назад

at 12:18, length is SPAN. !

@daviddavids2884 3 года назад

at 5:55, if you KNEW that, WHY did you make the fuselage TOO LONG.?????

@daviddavids2884 3 года назад

at 2:36, those are SF props.!!!! which is the type of prop that all you boys use, for EVERYTHING. SF stands for Slow-Flyer. all you boys SHOULD be using E props. Electric. googletranslate

@daviddavids2884 3 года назад

at 8:34, AGAIN, area is less important than PROPORTION.!!!! as stated, earlier, the root chords of the stabs Should be Equal. and the height of the vert-stab should be equal to a bit LESS than fifty percent of the span of the h-stab.! googletranslate

@daviddavids2884 3 года назад

at 7:12, when you say 'one by eight', many western people will think 1 x 8 googletranslate

@daviddavids2884 3 года назад

at 13:19, the Mass of the aileron servos SHOULD be located at, or Forward of, the cg line. that mass should Also be located as far Inboard, as is practical.!!!!! googletranslate

@daviddavids2884 3 года назад

at 9:27, 33 percent is TOO far aft. it is THRTY percent, or a bit forward of thirty.!!!!!!

@daviddavids2884 3 года назад

at 5:42, you have said exactly nothing, here.

@daviddavids2884 3 года назад

information. at 1:30, that is NOT where cg goes.! FOR ANY WING, the Optimal location of cg is at THIRTY percent of chord.! (or, just a bit forward of thirty.) in the case of a wing that is not constant chord, the reference is 30 percent of mac. mean aerodynamic chord. in your studies, did you happen to see the word DIHEDRAL.!!!! a relatively small amount of dihedral Dramatically increases stability; and makes ailerons Unnecessary.!!! all you boys make Zero-dihedral wings. which REQUIRE Advanced piloting skills.!!!!! you use the term aspect ratio. while that use may be 'correct', the term Normally applies to a main wing. it is correct that ailerons extend to the wingtips. however, the use of Full strip ailerons is NOT recommended. you say the view, at right, is 'normal'. it is NOT clear what you mean, by that.!!!! the view, at left, reflects More correct design.!!! except, for the location of the prop.! suggest you view my design tutorials. at 1:43, part of the rudder should NOT be amputated.!!!!! consequently, you should DISCOVER how to NOT do that.! it should be understood that Almost No model builders know what they are doing. consequently, there is a LOT of MISINFORMATION online, about design.!!!! googletranslate

@ElectroniClinic 3 года назад

i am working on another one. this time i added winglets, and also using cg around at 27% i tested the new model, the stability is just amazing. soon i will upload the video. thanks for such a detailed analysis.

@daviddavids2884 3 года назад

@@ElectroniClinic hi. winglets do NOT go on this type of airframe. PERIOD. if you Cannot make inboard dihedral, use OUTBOARD dihedral.!!!!!!!

@ElectroniClinic 3 года назад

@@daviddavids2884 the one i am making right now is completely different.

@daviddavids2884 3 года назад

@@ElectroniClinic well, if you want your rate of 'improvement' to stay the same, don't take my advice. cheers

@Hari-ly1yg 2 года назад

@@daviddavids2884 nee arada punde. Poyi oomb.🙂

@daviddavids2884 3 года назад

at 7:45, and you end up with an EXCESSIVE stab span.!!!!!!!!

@daviddavids2884 3 года назад

at 1:50, the chords of the stabs should be equal. the chords of the aft control surfaces Should be EQUAL.!!! in your studies, did you encounter the concept of a LIFT-making Profile.? at 1:58, funny. that Heavy, unbalanced little glider told you NOTHING.! at 2:12, the tail Should be made as LIGHT as Possible.!!!!!! consequently, the Mass of servos does NOT go there.!!!! where a design has as many flaws as this one, Neither should the mass of a tail wheel be there. in order to Avoid excess mass at the tail, the stabs should be JUST big enough, to do the job. consequently, the span of the horiz-stab should Not be greater than, THIRTY percent of the wingspan.! (note that a tail wheel goes at the tail. and, That wheel is NOT at the tail.!!!) it would behoove you to Understand that ALL the mass in an airframe, ADDS UP. in this case, the all-up-weight (auw) of the model is TWICE what it should be.! note that the mass of servos, etc, should NOT be added at the 'top' of the model/fuselage/wing. googletranslate