RC Warn Winch Tutorial 

You’re welcome and thanks for watching!

Tom Bikonkav thanks bro!

Thank you for the kind words and for watching!

Thanks for watching!

Great to see that they sent you a new one and that is working, and thanks for watching!

Glad it helped out, thanks for watching!

thanks for watching!

Thank you for watching!

Thank you and thanks for watching!

You'Re Welcome!

rc mirian if I want to use 2 winches to I buy 2 and 1 controller or 2 and 2 controllers

Country Gamer I'm assuming you want to use each one independently, and as you can see the remote comes with 1 receiver, so you need 2 remotes with 2 receivers, but if you want both winches to work at the same time, just get 1 remote and receiver and you'll just need to make a Y cable from the receiver to both winches. Let me know if i made myself clear ;)

ok thanks cuz im making a scaler and I want a winch in the front and in the rear and im also making an 8x8 driven trailer and I want the winches to work together on that

Country Gamer nice, so you'll need for the scaler 2 sets of receivers and remotes but only one for the 8x8, post pics of the process, that's a great build ;)

Very glad it helped. You have great English! Thanks for watching!!!

Thank you bro, happy it's helpful!

+Jeremy Pete thank you for the kind words and very happy it helped!

Any pictures

Thanks for watching!

+travisamc hahaha thanks bro!

Truly appreciate it!

KevinMillard68 thanks bro!

rc mirian your welcome

Don’t remember exactly but if after binding doesn’t work, try and bind it again. No matter how many flashes the light does, it should work. Here’s also another video from rc4wd in case you’d like a look. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-PIlKC6olQ1g.html Hope if helps and Thanks for watching!

Mehdi Mirian alright thank you

This is the one, www.amazon.com/dp/B00JUJCNNY/ref=cm_sw_r_cp_awdb_imm_K18NQDZ57Y8BBA9W70SR?_encoding=UTF8&psc=1

Where you able to follow the video instructions? If so and still isn’t connecting, I know it sounds silly but see if the battery is compatible, if it’s fully charged and if after all this it still won’t connect, better contact the store you got it from, perhaps you got a faulty device. Best of luck and thanks for watching!

As long as it’s a small lipo you should be fine. Thanks for watching!

Correct, thanks for watching!

Perhaps exchanging it for an new one? Maybe you hoy a faulty one.

Could try re-binding it, if that doesn’t work try changing the battery on the winch controller. Hopefully it’s one of these two so it’s an easy fix :). Thanks for watching!

That sucks, hopefully you can still find it on eBay or other site. Thanks for watching!

Thanks and happy it was helpful!

It doesn’t automatically stop, so yes if you keep pressing the button it’ll try to either roll it in or out. According to their website it says it can take about 6.6 pounds but I’ve pulled close to 10. Thanks for watching after 5 years! :)

Yes it is, thanks for watching!

Here’s a video of the winch in action. This model not only works, it has worked all this years without a problem. A must if you’re into rc crawlers. Thanks for watching!

Yes you can do both, I just wanted to keep all it’s original wires intact. Thanks for watching!

Yes it’s easy to bind but there’s always someone that might need a hand to connect it, hence the views on the video but thanks for watching!

Devin Rochelle truly appreciate your kind words and very happy that helped!

Five years late and rc4wd still can’t get it right!!! It’s ok tho, I’ll just pull apart the components and reinstall them CORRECTLY. It’s not like I paid good money or anything.

Glad it helped and thanks for watching!

Try changing the remote’s battery first, if the problems persists, try connecting the transmitter to an individual small Lipo and bind it to the remote. That should do the trick. This is the battery for the remote, store.rc4wd.com/Replacement-Battery-for-110-Warn-Wireless-Controller_p_3739.html Hope if helps and Thanks for watching!

It’s a 2s 800mah battery

Very glad it helped and thanks for watching!

creamneuron correct, its mounted with velcro and using the screw holes of the winch mounting plate i soldered a wire from one to the other to secure it to the cage, will try and do a video!

How to charge RC Lipos and NIMH Batteries Tutorial ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-KrQ6KTqF4Zg.html

+scott firman great and thanks for watching!

+custom fast rc many thanks and very glad it helped!

Muchas gracias!!!

There are several, check out this link. www.hobbytown.com/rc-car-lipo-lihv-batteries/c1393

Happy it helped, thanks for watching!

Everything was listed in the video, thanks for watching!

At your local hobby shop or at authorized hobby websites like integy.com or rc4wd.com

My pleasure 😊 and thanks for watching!

This one, How to charge RC Lipos and NIMH Batteries Tutorial ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-KrQ6KTqF4Zg.html

+Robert S Tiest thanks for your comment and for watching!

If you have a transmitter with at least 3 channels, then you can use the third channel for the winch to avoid getting the winch controller. But you’ll always need the winch and it’s receiver plus a battery for it since it cannot use the bigger one from the rc. Thanks for watching!

@@MehdiMirian ok thanks for replying

No it’s not small, a winch is powered with small batteries, thanks for watching!

It is Not, so before mudding you need to waterproof it on your own, thanks for watching!

Mehdi Mirian Thanks for the answer!

+Krakow 04 you're very welcome and thanks for watching!

Yes it should, try it out and let me know :)

@@MehdiMirian A servo usually uses a signal wire to change direction, where the scale winches are basically just directly to the motor in the winch?

At rc4wd.com

It’s a 2s 800 mili amp battery. Thanks for watching!

Try your local hobby grade store and if not there are many online sellers, integy, Amazon or even eBay!

Jax Teller RC thanks bro!

+somavilla33 glad you found it helpful and yes because your RC most probably will use a bigger and more powerful battery that would melt the winchs motor.

Mehdi Mirian many thanks

+Dean Labella very glad it helped!

Local hobby shops or try integy.com, rc4wd.com. Thanks for watching!

Needs to be a 2 or 3 cell lipo, something like this, store.rc4wd.com/RC4WD-74V-850mAh-2S-LiPo-Battery-w-Balance-Plug_p_7095.html. Thanks for watching!

@@MehdiMirian thank you

James Johnson thanks bro, always a struggle with my accent and specially getting to technical stuff haha but again happy you liked it!

rc mirian it was very well spoken my friend keep up the good work :-)

thanks James!

Very powerful, can hold a load of around 25 pounds.

@@MehdiMirian Merci :-)

It’s shown on the video, Kyosho charger to BEC battery adapter. Thanks for watching!

Awesome, yes having wires everywhere doesn’t look too real!

@@MehdiMirian so I would be able to get a cable with servo connectors on each end and use that from the aux power source on the trx4 to the receiver for the winch?

@@tieintercepterpiolit yes you should. Thanks for watching!

Thank you and thanks for watching!

No, you have to make it waterproof by either putting it inside a waterproof box or spraying a couple of coatings to seal the electronics.

Any small lipo battery will work since you’ll be powering only a winch. Thanks for watching!

No but mercy for all comments!

Thanks for watching!

+karl schweizer thanks for watching!

???

+rcmaster 1965elcamino meaning max as for what type of battery? the one in the video is the max otherwise winch won't work.

yes what is it

What the video and you'll see!

OK ...

If your receiver has an extra space to connect it, yes try it out since it should.

@@MehdiMirian ok, was looking into it for my red at and I figured it should just be able to take power from it

@@habib1971 thanks for watching!

Has to be a separate battery since usually 1/10 rc cars use big lipo batteries. Thanks for watching!

@@MehdiMirian thanks for the reply

@@Beastlysimmer_uk you’re welcome!

+Braiden O'Rourke thanks!

Thanks!

Para poder conectar un transmisor, tienes que tener un radio con 3 canales, tú tercer canal tiene que ser (on/off/on) de lo contrario no funcionara. Si lo tienes, este video te podría ayudar para conectarlo, m.ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-H9WiqNbLImw.html Ahora si no tienes este tipo de radio, es mejor adquirir el transmisor de rc4wd. Espero te ayude y gracias por tu visita a mi cabal!

According to the manufacturer, this winch can be used using a Voltage: 6v to 11.1v. So your battery looks good. Thanks for watching!

@@MehdiMirian "Thank you" Mehdi. Your feedback and video is awesome.

Thank you for the kind words!

That’s the whole goal, to use it on a rock crawler, on the vaterra slickrock! Thanks for watching!

You should be able to charge any 2s or 3s LiPo. Perhaps an adapter might be needed to connect the battery to the charger, but try first to simply connect it directly to your charger, if not try one of these links to find the correct one, www.amazon.com/dp/B016065X72 www.amazon.com/dp/B016075GEG www.amazon.com/dp/B01607M9C8

That’s a good idea too!

Nick C. Receiver is underneath the hood, winch on the servo and battery goes on copilot side.

rc mirian nice setup! It looks very realistic.

thanks Nick C. that's been the whole idea do good to hear it from someone else than me :)

rc mirian will you be putting this winch on your Trail Stomper at some point?

Nick C. Ohhhhhhh yes ;)

+Rj Arseneau-Sullivan I bought the winch, remote and receiver in one package so they come together, separately got the battery.

+jose reyes if you’ve tried binding it like the manual says, I would contact the seller since it should bind in a couple of second and there could be a problem with yours but here’s a link for how the binding goes. www.beadlok.com/product/images/626/Z-S1092-Warn%20Winch%20Instruction%20manual%20Wireless%20color-V7.pdf

Glad it helped and thanks for watching!

According to rc4wd, you need to connect the winch to a “control unit”, and then connect the control unit to your receiver so it works on your remote. This is the “control unit” link. Hope this works! store.rc4wd.com/RC4WD-Wired-Winch-Control-Unit_p_3725.html

That’s another good idea too, i decided to keep it separated but again, a great option too. Thanks for watching!

+WIZARDWERX they have great products ;)

This winch runs slow, I truly don’t know where to find for a winch that pulls that fast but wish you all the best. Thanks for watching!

@@MehdiMirian If you find something let me know. It's not for a model car, I just need something small-medium sized that I can be powered with a small lipo battery. I don't need a full size real life winch haha

+Dafydd James this winch kit is water resistant but I've submerged it in water and still works ;)

You’re supposed to hold it for 3 seconds and after flashing it should stop, did that work?

So you do get a flashing light when holding the button?

No, it didn’t work.

Unfortunately I don’t have it

www.towerhobbies.com/cgi-bin/wti0001p?&I=LXEFES&P=0 www.towerhobbies.com/cgi-bin/wti0001p?&I=LXEFEP&P=M www.hobbyzone.com/batteries/lipo/2-cell/DYN1475.html Hope this helps!

+TheMartynneil no, the remote can be at about 5 ft or a bit more from the receiver and pointed to the sky if you want and still work, at least that's the farthest I've tested it since I'm always near the RC.

Not my native language but i think i managed, thanks for watching!

Unfortunately this winch cannot be used using that way since they already come pre binded to their remote. But, you could try getting the winch only so you can use another receiver with more channels so you can connect 2 winches to it and use only one remote. Good luck and thanks for watching!

Mehdi Mirian thanks so much! I

A small lipo

+MR.CREATE yes you can!

ok thanks a lot :)