RD350 - Oil Pump Working & Disassembly 

Thanks, yes, I am rebuilding the engine, was not so healthy, will start uploading videos soon!

@@seventiesmetal8673 thanks. A good long drive vlog would be really nice. There's hardly any RD350 content on RU-vid. You have all our attention

Thanks Pranav 😃 Will do...

bro please upload video on what is 7 port torque induction.. how it works..

Thanks! I don’t understand what you mean? The cam rotation is what causes the plunger to move up and down. So what you say seems like the pump is working as it should

You are right, seems like a pin is missing on the other side and there is a slot in the worm wheel as well for this pin. I am pretty sure I did not lose any part, maybe the previous owner had serviced the pump and misplaced it. But one pin will still do the job of making the cylinder rotate with the worm wheel.

I buy all RD parts from www.yambits.co.uk ... the parts are a bit expensive but it’s one place for all your needs and the quality is good 😃

Hey Bi-Ri😃 Saw your channel, you have a very nice Rajdoot and please keep making maintenance videos

Seventies Metal oh thankyou, I sure will.😀😀😀

Hi Mjshaheed! The plunger seal should have its grooved surface face the inside, so when you dismantle the pump, you should not see the groove until you remove the seal. Hope what I said made sense!

Have a look at these videos, the pump plunger has to move up and down when engine is idling. Also, take out the oil feed lines from the carbs and make sure oil is dripping from these pipes. Also when you pull the pump throttle cable, the dripping has to increase. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8aaNKoTnZVY.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Cm1sheTGN3s.html

@@seventiesmetal8673 Brilliant! Thanks very much

Thanks Rahul 😃

Hi! I think it’s better to check the pump when the engine is running. Or else you will be cranking the engine many times to see the plunger move. Don’t rev the engine though as it can seize if the pump is not working. If you want to test the pump while revving the engine, I suggest pre-mixing fuel with oil. The plunger motion should increase in frequency as you rev the engine.

@@seventiesmetal8673 Whats the proper way to check if pump is working while engine is running.. thanks in advance for any help.. just bought a 1973 RD350 thats been sitting for years.

Hi! Check the below links. You need to check the stroke clearance of the pump, bleed the pump and also measure oil quantity coming out of pump. www.aircooledrdclub.com/smf/index.php?topic=54477.0 www.aircooledrdclub.com/smf/index.php?topic=45539.0

@@seventiesmetal8673 your the best.. thank you

Sorry, did not manage to film the rebuilding of pump. Will try to upload a video of the pump working though!

Seventies Metal waiting brother for the video

Fully mechanical he!

Hi Shaikh! Sorry I did not understand your question. Hum Hindi mei bhi baath kar sakthe hai 😃