Re-timing the New Holland Square Baler - Video 1

Подписаться 79 тыс.

Просмотров 60 тыс.

50% 1

It's got a few issues, no doubt, but how extensive are the issues causing the new Holland 575 small square baler to miss knots?
Today I begin replacing parts and discover a BRAND NEW ISSUE that SETS BACK BALING!
If you have a small square baler, this is NOT a video series you want to miss if your baler keeps missing knots!
👇
Ratcheting Wrenches:
Metric (USA MADE): amzn.to/36N2SKJ
SAE (Made in Taiwan): amzn.to/30TNqJ3
--------------------------------------------------------------------------------------------------------------------------
👉Follow the WTFarm Dog Instagram Page: / wtfarmfrenchton
👍Subscribe to the WTFarm Dog Channel:
/ @frenchtonfamilyfuncha...
You can help support the continuation of this channel by visiting any of the links below! I earn a small commission from your purchase :)
* Farm Wear MERCH:
--- teespring.com/stores/wt-farm-...
--- Farmer's Only Merch: store.farmersonly.com?sca_ref=55779.JKbo4F8URs
--- Buy the Ford Hat: amzn.to/2Kp2UM1
----++++ Check Out my SECOND channel! / @suzthenoobgirlvideos1977
================
Join "What The Farm Girl" on her many CRAZY adventures running their NEWLY BUILT, FIRST GENERATION family farm on 87 acres in Western Michigan. Born and raised a city-girl, she's finding out everyday what's she's made of as she struggles to figure out planting, harvesting and equipment repair. With plenty of tongue-in-cheek humor and lots of mischief, you never know what you'll watch next!
Women-run farms are so very scarce, but Farm Girl shows that girls don't just have a place "helping" on the farm, they can RUN the SHOW!
*Buy the Ford Hat: amzn.to/2Kp2UM1
Farm Girl LOVES MAIL!
WTFarm Girl
PO Box 228
Sand Lake, MI 49343
►Order Syrup and Hats here:
www.zansfarm.com/wtfarm-girl-m...
► Follow WTFarm Girl on Instagram
/ wtfarm_girl
► Follow WTFarm Girl on Facebook
/ wtfarmgirl
Check Out These Popular Videos:
►WATCH NOW: Farm Girl Tries the Tapeworm Diet • Video
►WATCH NOW: Newly Repaired Bailer Breaks Again!
• 133 Newly Repaired Hay...
►WATCH NOW: My Worst Farming Accident Yet!
• 134 My Worst Farming A...
*BUY FARM GIRL HATS or Maple Syrup*
-Hats are $15 each plus $5 shipping per order
Order on www.zansfarm.com
Support me on Patreon: www.patreon.com/wtfarmgirl
or send me a one-time tip: www.paypal.me/wtfarmgirl
Thanks for all your support!
#Farmgirl #femalefarmer #agyoutube #firstgenerationfarmer

Опубликовано:

8 окт 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 178

@tonyburelle6633 3 года назад

I sincerely hope no one will joke about the hay you've made, you tried different things this year, some worked ,some didn't, with everything else going on, including marriage, I think you're to be commended, especially trying to do the repairs by yourself, can't wait for the next installment, when a lonely farmer offers assistance, the round baler stuff looks interesting also

@This1LifeWeLive 3 года назад

It was definitely a way I didn't want to end the season, lol!

@leomcavoy5770 3 года назад

The farmer with the patience of Job AND actually reads the instructions, THOROUGHLY, what's up with that, LOL?!?! God bless and have a safe wrap up to baling season 🙏 from beautiful downtown northern Maine!

@davemegaw5282 3 года назад

Keep up your great videos and all I see and love the most is your always learning and staying positive ❤️

@thecattlemanswife 3 года назад

We were baling square bales yesterday...1969 New Holland square baler mistied probably a dozen times...so frustrating. Our issue wasn't the same as yours but I can totally relate. Good luck and God bless.

@chrisgossman6512 3 года назад

I am just a fan of farming RU-vid videos. I grade you as top notch. By far you are the best in the female category and over all among my favorites in my top ten channels. Thanks for sharing.

@This1LifeWeLive 3 года назад

Thank you Chris, glad you enjoy the videos!

@voivod6969 3 года назад

You are becoming a first-rate service tech. Really admire your pluck and perseverance. Just never get so cocky that you forget about safety.

@This1LifeWeLive 3 года назад

Very true. Safety is always at the top of my list. Even Welker's "Leg Arms" who's been working on big equipment his entire adult life had a terrible accident last week resulting in a broken arm (that was lucky).

@voivod6969 3 года назад

@@This1LifeWeLive Very sorry to hear that. We never know if/when it's going to happen, all we can do is take all reasonable precautions. Best of luck with everything :)

@TheWabbit 3 года назад

Diesel makes a good cleaner but also that purple power cleaner does a heck of a job, When I rebuilt the 460 in my F250 I found overnight was as long as I could keep parts soaking. It would start stripping the finish off parts. An afternoon and that chain will be clean and ready for lube. I just finally bought a set of ratchet head wrenches last year, before then I just used a box or open end wrench and moved it 30,000 times for those tight spots. I would say you deserve the coveted PAB ( pat on the back ) for such excellent work, remember you're a farmer you do what you have too 😁, Although I'm sure Erik will come up with something more to your liking. Take care!

@robertheinkel6225 3 года назад

Years ago, I was sent to New Holland, PA, to their factory, for a week long class on square balers. When I returned to our shop in northern IL, I spent the next three years as the only factory trained NH baler mechanic in a fifty mile radius. I would spend all summer on service calls. I could diagnose knotter issues over the phone. The owners manual is a godsend. We actually built a special tool to NH specs to bend/adjust the knotter arms the knives attach to.

@This1LifeWeLive 3 года назад

I bet you became very adept a fixing them 😄

@evankibbe590 3 года назад

Suzanne you will get it figured out. Your very very present . And always do your homework.. 😊😊👍👍👍💝💝🍨🍧🍦🍵🍵

@bushcraftjoe1 3 года назад

Great video. Tool of the day is a ideal

@brentrollins2572 3 года назад

I would never, ever even think of making fun of you. Anyone who does is an insensitive boob !! I admire you and your farming 💛💛

@cletaspratt9162 3 года назад

Around here if someone doesn't kid you around a bit you wonder if they're sick, or don't like you.

@virginiareid5336 3 года назад

You will get this done! You never give up. You might need help on this one , but you will be doing the work. Take Care

@This1LifeWeLive 3 года назад

IT got ugly for sure, lol!

@theobediahproject1567 3 года назад

What are you talkin about you very still full of talent that's why I love watching you you're perfect

@This1LifeWeLive 3 года назад

Thanks for watching!

@watomb 3 года назад

Loved the drama ending like a tv show:). I had the worst luck with old square bailers.

@This1LifeWeLive 3 года назад

There are many places to fail on a square baler ;)

@dennisdaniels2387 3 года назад

I have bought those type of wrench's from Harbor Freight there over 10 years old, never had a problem with them !!!

@lloydsells2161 3 года назад

I love how in describing things you call things a him, lol. You always have awesome videos, thank you and BTW, I learn much from you.

@robertheinkel6225 3 года назад

As a crew chief in the Air Force, all planes were females. Calling in jobs, you included the tail number, but used different terminology. 0018 became balls 18. When women joined the crew chief field, some things changed. Their planes were males. Their tail numbers for 0011, became tits 11. Nobody seemed to care.

@davidwaddell8758 3 года назад

Hey WT Farm Girl!👋 With all this hard work and fixing things Eric should either give u a full day off with full spa treatment or a Elk hunt in Colorado or Montana! 😆❤👍

@This1LifeWeLive 3 года назад

heck yeah! I'll take BOTH! Probably just settle for a few local whitetails fat off orchard grass and my son walking across my back ;D

@Channel4029 3 года назад

You have never been to a warm place in the winter. I think Eric should take you to Florida or on a Bahamas cruise for a week or two this winter. You are worth every penny.

@This1LifeWeLive 3 года назад

We had been thinking of it, but with all the covid lock downs we don't want our first vacation to be a bad one, lol

@aldogiucci7601 3 года назад

Hi good video about your baler. I have an old 445b internal. Be careful with timing. Sheared a number of bolt because we did not time it correctly. Check your hay plates and hay dogs. If your bales are uneven. Pulled around 1500 bales on 5 acres.

@outwestcountryliving9735 3 года назад

Gigantic task you are taking on. It is unrealistic to thing you could think you can bale without a missed bale. You will have done a great job if you only have one or two. My hat is off to you. I know many farmers who cannot time. I have tried myself and have had mixed success.

@This1LifeWeLive 3 года назад

I read online that there are two ways to time (this from a baler mechanic). One way is quick and fast and gets a small farmer mostly through the summer, th other way is much more involved and gets a big farmer through the season. I actually had everything SPECED to perfection before I hit the field this year . . . BUT . . . with so many continual distractions, I forgot something important, and it un timed EVERYTHING . . . but you'll see in upcoming videos ;D

@outwestcountryliving9735 3 года назад

Hope you have good luck

@danielkaz6280 3 года назад

Great vids :) 💗

@joegoldsmith5235 3 года назад

My 1st welcome to hay. I mowed and raked it. 1st season 5,000 bales. Yes had to hand load it on pickup truck.

@This1LifeWeLive 3 года назад

Pick-up truck loads would take a LONG time!

@mikegoodman447 3 года назад

The chains are supposed to look like that...I'd just get a long air nozzle and blow them off and re oil. Leave them alone unless they are worn out, taking them off to be cleaned won't help. BIG Tip. We just lost both needles in out baler. The safety latch spring broke and did not work. Something happened and the plunger broke off both needles... Replace the safety latch spring but it is expensive $27.00.... It's on the lower frame front, drivers side. It's the device that stops the plunger and breaks the shear bolt if you are lucky. Test it often to make sure it's free. Our regular baler operator was out and I ran 1,440 bales thru in 5 hours a personal best for me. No bad bales.

@This1LifeWeLive 3 года назад

I will double check it, thankyou!

@robertpsieving4401 3 года назад

Hey, don't worry about the small operation. We started with just 80 acres & ancient equipment. We later started dairy farming. Baling became multiple days of 1300 bales + per day. We have since scaled back. We still bale hay but more like the early days. We however still use our dairy farm days baler. We have never had the insulators gouge out like that. My only guess is the plastic twine, but I must admit that doesn't make sense. We have always used sisal twine except for a short disastrous experiment with plastic

@This1LifeWeLive 3 года назад

I'm guessing it was due to the twine tensioner plate being too tight. Over time it just them to wear through . . .

@mountainviewturning5319 3 года назад

Neat video 👍

@aminsiahmansouri9472 2 года назад

Very good

@jasonbusch3624 3 года назад

Just replace the chains if there is any slop in them at all which there probably is. Chain is cheap the Sprockets are expensive and hard to change. If you change the chains it will keep your Sprockets from wearing. A sloppy chain wears out your sprockets quick. A good tight new chain lands in the grooves instead of on the edge of the tooth. Those chains have probably never been changed. You can get big rolls of chain and a chain breaker on Ebay cheaper. PJ1 Motorcycle chain lube is cheap tacky and doesn't fling off.

@mikeskidmore6754 3 года назад

I use Bel-Ray Motorcycel chain lube on everything and it has Moly in it ..

@tiredoldmechanic1791 3 года назад

Soak the chains in automatic transmission fluid, rinse them with diesel fuel and lube them with a dry moly lube so the dust doesn't stick to them. The moly lube goes on wet so it penetrates then the carrier evaporates leaving the moly in the chain. The ceramic twine guides don't need to be very tight and you could put rubber or tape on the clamp.

@This1LifeWeLive 3 года назад

I never understand why all the types of lube. So Molly lube is a housewife lube and she hates dust, lol . . . excellent!

@allenburns3177 3 года назад

Moly lube is not going penetrate into the rollers and pins. It does not even last very long on the surfaces before it is worn away. Elevators and escalators run 24/7 and are expected to last with proper maintenance 30 years minimum with out a day off. Most are in service over 50 years. When you have equipment costing many hundreds of thousands of dollars. Dont cheap out on using cheaper less effective alternatives. Pay me now or pay me later.

@tiredoldmechanic1791 3 года назад

@@allenburns3177 Moly lubes are designed for that exact purpose. They have a carrier that penetrates to carry the lubricant deep into crevices to disperse the molybdenum disulfide. Molybdenum disulfide is used in extreme pressure high quality lubricants because it provides the best lubrication.

@allenburns3177 3 года назад

@@tiredoldmechanic1791 my 40 years working on equipment says different. If you use molly you need to be always servicing that equipment. Using chain lube is a proven winner. It is also labor efficient. Chains that run 50 years before needing replacement. Also less adjustment is required. In the end it is about cost. With millions of units running thru out the world by all of the major manufacturing in the elevator industry and none use molly. If it was better, cheaper they would use it. They squeeze every penny possible.

@The44Irish 3 года назад

I think that you may have a broken shaft, right side. The gear that is not turning side. The nut that needed to be torqued to 25lb, that shaft. It was turning at the top but not at the bottom where the worm gear is.

@albertgavillet1895 3 года назад

Merci pour cette video qui nous indique l'entretient d'une botteleuse est important surtout les supports de ficelle Albert

@robertheinkel6225 3 года назад

You should be able to easily rotate the flywheel by hand. The only time it should fight you, is if the plunger is compressing a bale. It it turns that hard, check the bearings on the plunger. Some used rollers, but older ones used adjustable wooden slides. They can get wet, expand and bind, or just be way too tight on adjustment.

@smitty9120 3 года назад

I wonder if you have a broken shear bolt on your flywheel somewhere?? Ive never seen the flywheel not run the plunger by hand

@sheilamclaughlin963 2 года назад

I use to dump used oil on the twisters and wire on that 285 made a lot of difference, I was fairly young when we had the 69 with knotters but I think I remember dad oiling the knotters and we never rebuilt them, we did rebuild the twisters on the285, had a mechanic come down and everything had to be perfect for them to work, if those knotters have twine guides they have to be perfect to work, the wire guides had to be perfect or it would not twist the wire

@This1LifeWeLive 2 года назад

That was part of the problem when we bought it. The twine guides coming out of the bale twine box were too tights, causing the twine to pull back on the knotter assembly and then of course break. It also wore clean through all of the ceramic round guides, so I ahve to replace those and start at the beginning with un needed tension, dialing it back.

@gullreefclub 3 года назад

Best thing I have found for cleaning chains is a bucket with a couple of gallons of diesel fuel or kerosene with a quart or two of Automatic transmission fluid. I normally wipe the chains off with a rag or three and then give them a couple day bath in diesel fuel/fuel-oil/kerosene and automatic transmission fluid mix, followed up by another wipe down and use a wire brush dipped in the cleaning solution on any gunk that caked on heavy and lube them up after I reinstall them. Just be sure the grease/lube you are using on your chains and for that matter on your equipment is waterproof, because believe it or not many greases are not waterproof

@gordbaker896 3 года назад

Perseverance . Look in the dictionary under Suzanne.

@robertschoenborn8413 3 года назад

Hello neighbor sorry I've got nothing...! But good video see you next time 👍✌🤞😉

@allenburns3177 3 года назад

Working on escalators almost every thing is driven with roller chains. First drop your new chains in a bucket of mystic chain oil, it has an additive that makes the oil stick to the chain. Buying chain in bulk is a lot cheaper. A set of chain tools and parts like offset links and master links. Chain breakers and chain pullers for connecting the chains together. When you run out of adjustment on the idlers. Replace the chain and sprockets if worn. Use the offset links to create maximum adjustment. Then lubricate those chains so they last. If they get dirty and dry. Remove and drop in cleaner then overnight in the mystic bucket to soak. Not uncommon to get 20 plus years on some chains on an escalator.

@This1LifeWeLive 3 года назад

Thank you! Good to know! I had recently read that chains do "stretch" and stretch more when dry (contributing to excessive ear)

@tinachambers4887 3 года назад

A day spa or a trail ride have a day love from TEXAS

@glenn6448 3 года назад

Thats interesting. I use to turn the flywheel on my 310 baler (great baler) to watch my knotters. Somthing must have changed??

@This1LifeWeLive 3 года назад

Not sure. But it's possible it takes MANY revolutions on the flywheel before any action happens on the backend. I will try it again out of curiosity . . .

@eddiemoody8471 3 года назад

Farm girl with all the money that you are saving on equipment repairs it should justify maybe a trip to the spa , hair salon, nail salon or something you like but don't do to save money because that's what most mother's do every day take care of everyone else and they put there self at the bottom of the list and you work on equipment that would make you a priceless treasure and I am sure that your man would agree with that thanks for sharing 👍💪😁

@This1LifeWeLive 3 года назад

A spa day on the beach, lol!

@KevinCoop1 3 года назад

Suzanne, At 16:17 and 17:13 when you were turning the PTO, the worm gear did not move like the one on the left. The bolt that you tightened earlier was turning inside the worm gear. It is either you are not tightening it enough, or there is something like dust inside that is causing it to not be able to tighten. Pretty sure this will fix your woes! Respectfully, Kevin

@This1LifeWeLive 3 года назад

LOL you'll see more on this in the next video! But the manual stated "do not overtighten" so I was making sure I didn't . . . but like I said, you'll see!

@KevinCoop1 3 года назад

WT Farm Girl Videos OK, keep me in suspense!!! 😊👍

@KevinCoop1 3 года назад

Suzanne, Was I even close? Got to know!!

@scottganjon6895 3 года назад

Suzanne, I have several things to point out . The white insulator should have the flat spots and when tightened you should be able to move them a little . The plates in the twine disk that you mentioned 1/8 inch clearance are actually cleaner plates for the twine disk and the 1/8 “ measurement should be with you pushing the plates up to the needle. The twine disk leaf springs you put the washer under are tension springs and have nothing to do with how far the twine holder push’s in to the disk. The needles should drag lightly on the knotter frame when coming through and last I noticed when you were turning the baler over with twine the right side gear on the tapered shaft was not turning. The shaft was spinning inside like the nut wasn’t tight. Not trying to sound like a know it all but have been doing balers for a long time . Just want to help 🙂

@ronsommer9409 3 года назад

@11:39 Suzanne turned the right side nut with her fingers, so it was not tight.

@This1LifeWeLive 3 года назад

Not every shot was it "tight" but in the next video I learn what "tight actually means for this part. The manual stated in BIG letters 'DO NO OVERTIGHTEN NUT' . . . and I find out (accidentaly) why this is, lol, so it's a BIG trial and error session ;D

@nuralyjumabaiov5279 10 месяцев назад

Ошол китепти кайдан алсам болот

@farmingforfunandprofit940 3 года назад

Our baler is newer but it came with the rebaling operation we bought.... I would guess it has run about 48,000 bales to date.....Last week we baled 500 bales(53 foot trailer load) in 2 hrs and 45 minutes....no miss ties....

@This1LifeWeLive 3 года назад

What type of baler? I have read that there are "quick fixes" and "full fixes" for baler timing and most people don't do either, they send it in. Quick fix is cheaper, but usually gives issues later. I'm guessing your baler was well maintained :)

@farmingforfunandprofit940 3 года назад

@@This1LifeWeLive New Holland 5070 As I said it came in the "package" with the unroller tables and The Bale Bandit......I have my doubts as to it being greased on a regular basis because the knotter zerks gave me a fit the first time...We discovered that the harder you push feeding it the less trouble we have with the knotters and the Bandit..... The Bandit is not as gentle with the bales as a Barron

@jimg8218 3 года назад

The knotter takes time to align, but you can FIGURE IT OUT ,we have faith you will succeed, : D

@MrJerryKramer 3 года назад

I would spray engine clean on the chain’s then power wash them. Then you wouldn’t have to take them off.

@oby-1607 3 года назад

I am glad the baler didn't start while you were turning it over with that shaft. lol.

@This1LifeWeLive 3 года назад

It's not an engine, lol!

@40gritgarage67 3 года назад

Try using a Motorcyle chain cleaner and Lube on the chains. May also be good idea if you put them back in the same location if you have to remove them for cleaning.

@This1LifeWeLive 3 года назад

I didn't know there was a motorcycle cleaner, althogh I have been using the lube on other equipment

@40gritgarage67 3 года назад

@@This1LifeWeLive There is also a special brush made to clean motorcycle chains. www.amazon.com/NoPinch-Durable-Motorcycle-Maintenance-Cleaning/dp/B07D5MTVP7

@chuckwin100 3 года назад

Do you store the baler outside or undercover. The knotter needs to be protected from rain.

@This1LifeWeLive 3 года назад

We do in the wintertime. In the summer it's a battle for space in the barn.

@brucealvarez9263 3 года назад

You are game to fix ANYTHING!!!!!

@randymaylowski2485 3 года назад

Yer doing a good job of working on that, and yes its better to fix it yourself then haveing someone else to, especially if you really ain't good friends that don't work with each other out;) and yes I understand what you mean we are landlock too and I hate it.. can't be able to extand our pastures! So I understand what you mean, why you want to make as much hay as possible. But just remember, more each crop of hay you take, you need to replace it by putting food back for the ground. Which that's the problem nowadays which I know why, but it's not right! plants are just like us living things humans, animals, amphibians, you name it, just don't live on water, it takes food as well. So if you maintain your fields right, you should be able to produce somewhat enough crops depending on the year. Other than that good video👍☺.

@This1LifeWeLive 3 года назад

Very well said! I have put nitrogen down, but that's not the same. I'm starting a compost pile this year and will add that to the fields late winter. Fall is best time I think, but I don't have any right now, lol. Going to collect leaves, manure and woodash to put down :D

@randymaylowski2485 3 года назад

@@This1LifeWeLive that's cool it's always better to compost stuff, but that's okay if you don't have much this year, but like next spring after feeding all winter compost everything then;) other than that thanks for replying back.

@robertmarino2158 3 года назад

Leave the chains on , spray with brake cleaner, it will take a while , good luck !

@daveknepp7718 3 года назад

I use a mixture of chainsaw bar oil and diesel fuel that I spray on my chain. It keeps them oiled and clean.

@colmortimer1066 3 года назад

I think if this fixes it you should have Eric record a full length episode of him working on something that you can post for us to see. :)

@This1LifeWeLive 3 года назад

Erik only works on the vehicles. He's doing his truck right now . . . swapping wheels/tires. And he changes the fluids in the tractor sometimes :)

@greghamann2099 3 года назад

Your reward will bea small utility tractor to do odds and ends around the farm like pull the JD rake for example.

@dehavenfamilyfarm 3 года назад

I've said it before and I'll say it again- knotters are the devil 🤣

@arvillenoe2542 2 года назад

I'd love to have the old 273

@johanvantrier 3 года назад

WTFirst generation farmers still have to learn a lot. X

@sean4638 Год назад

Well you have the PB blaster nice choice. !

@bobreeves5412 3 года назад

Check the worm gear because the shaft was turning your worm gear may have a split in it because they will split

@sodbuster518able 3 года назад

On a John Deere baler you can rotate fly wheel even when hooked up to tractor.Not sure if you New Holland T5 115 can Rotate the PTO shaft freely with the engine off by hand?I don't know if that tractor has like a clutch brake when PTO is disengaged.our 1520 JD was a gear engagement to use PTO,push clutch pedal further down for PTO disengage.That tractor didn't gave on the go lever engagement had to stop to put PTO in gear.our JD 3020 had its own live PTO engage any time on the fly had its own separate clutch.yours is done electronicly like a a/c clutch on a compressor

@This1LifeWeLive 3 года назад

It does have a clutch brake, so after the pto is disengaged the flywheel keeps spinning

@mattrydalch3085 3 года назад

👍

@stephendixon4619 3 года назад

Lots of good advise on cleaning the chain, but don't clean those chains! Those chains are stretched and need to be replaced. Judging by the red paint on the chains I believe those are original chains, which means their time is up. The chains should go on fairly tight, with the adjusters in the first quarter of adjustment. When the chains reach the end of adjustment, as yours have, then it's time for new chains. As the chains stretch they reach a point where they no longer ride correctly on the sprockets and will wear out the sprockets, which cost a lot more than a little bit of chain.

@This1LifeWeLive 3 года назад

Good to know, thankyou!

@rexmiller6369 2 года назад

Were is Part 2 of this video? How did you fix This?

@This1LifeWeLive 2 года назад

I am afriad I'm going to have to re-sort all my videos! So the issue had started way back when the tension was too tight on the string (thanks to those ceramic holders) and it caused the knotters to snap the bolts out of their holders and fly upward. Since they didn't do it at the same time, they fell out of time from each other. The nut that holds the worm gear must be loosened and you tap the star gear with a hammer and punch to rotate it and the cam disc. If both seem out, set one FIRST (don't forget to correctly torque the worm gear nut to proper specs as over tighteneing strips it - that was problem 2). Once one is set (grab a good manual it should read the specs for setting the disc cams), you can "time" the second knotter to the first. Accordng to One Lonely Farmer it might take a few rounds of re-timging the one side. I think the follow up video referenced OLF or one lonely farmer in the title . . .

@jimg8218 3 года назад

You figured out and fixed the haybine,, you will figure out and fix the baler, take roller chain off clean or soak in a gegreaser over night then let drip dry,, get motorcycle chain lube soak it well, then let drip dry, install, hand rotate chain on sprocket while spraying more lube let dry,, ta DA,, on the chain : D

@dixiemae5042 3 года назад

First baby 👊🏻💪🏻

@edknotts8683 3 года назад

You can buy the wrenches from Menards , and if you will watch ,you can find them on sale .The Christmas sale for sure .

@This1LifeWeLive 3 года назад

I've permanently boycotted shopping at Menards after their employees repeatedly heckle elderly folks about wearing a badge to prove their medical condition that prevents them from wearing a mask . . . in several stores across the midwest. If they want to tell them they aren't allowed in, fine, but to heckle shoppers and make them register their condition is an absolute NO. They used to be my favorite store . . .

@treystewart544 3 года назад

I love you

@bombadeer8231 3 года назад

Hay Farm Girl 👧 I would just leave the chains alone. The dirt protects the chain from the weather and doesn’t interfere with the chain being a chain. You’ve become quite the mechanic 👩‍🔧 You could advertise and fix everyone’s baler for miles around 👍

@arzamumma1202 3 года назад

The needle clearance to twine disc holder is based on the fact that the knotter frame is NOT jumping up and down during the tying cycle, resulting in the bill hook NOT getting a hold of the twine the needle just brought up, resulting the twine is NOT where it needs to be at the start of the cycle.!!!!!!!!!!!!!!!! This all happens in a "nano second" all settings and adjustments MUST be PERFECT otherwise no knot plus the frame can't be moving during this critical time.

@michaelpetty2016 3 месяца назад

I soak chains and other parts in a tub of solvent or degreaser overnight. Comes right off with a stiff brush the next day. Easy peasy.

@jimbaxter4600 3 года назад

The "baler twine" (as named in the manual) is not called "string". That is what is used to fly a kite. LPL

@This1LifeWeLive 3 года назад

Eventhough I knew what a river was and what a lake was, anytime I spoke out loud I got their names mixed up until 5th grade. I call diesel "gas", so . . . my mouth doesn't always translate what my brain is thinking...

@jeffglasman19 2 года назад

Watching the video, I noticed that the right side assembly is loose and moving around when the needles are up.

@This1LifeWeLive Год назад

Some places say to keep it tight, other say it needs a small bit of play. I CAN tell ya that for this machine, extra tight leads to machine failure (I made THAT mistake a while back). So both should ahve some play :)

@sodbuster518able 3 года назад

Your reward for the day should be go to Dairy Queen and treat yourself to a Blizzard lol

@This1LifeWeLive 3 года назад

Erik has been pretty quick on buying me icecream these days 🙈

@scottsmith6903 3 года назад

Do ya rent any hay property so you can do more? More bales more money. Hay pays! I rent 4 different properties.

@rogersigmon1169 3 года назад

You don't have the twine disc gear nut tight after you loosened it. It's spinning and the gear is not moving. It has to be more than finger tight.

@This1LifeWeLive 3 года назад

Correct. I spent probably 16 hrs working on it, so it was tough capturing every adjustment. Just tried to shoot the overall idea

@rogersigmon1169 3 года назад

I am so impressed that you would even do this many people have no idea. 👍

@sheilamclaughlin963 2 года назад

Use the flywheel, check all the timing markers and make sure it is in time, must of pushed the 285 plenty hard as it had 3 sizes of sheer pins and u used them all, especially flywheel plns

@This1LifeWeLive 2 года назад

My husband likes to push his luck with farm equipment ;) (he has since been banned from running the baler). I think this was my last session timing the baler, since then I have had zero missed knots and everything has been running to perfection. It IS still a hair bit off between the knotters, but so far hasn't caused any issues, even after 2,000 bales :)

@rontownsend8235 3 года назад

what are you cooking for supper tonight, maybe I can come up your way. Before i scare you off i'm in Florida so it would be a long drive.

@This1LifeWeLive 3 года назад

Hopefully woodchuck 😄

@rontownsend8235 3 года назад

@@This1LifeWeLive Can woodchuck really chuck wood?

@mikeskidmore6754 3 года назад

WD-40 you need some Liquid wrench of PB Blaster

@scottsmith6903 3 года назад

800 to 900 bales in an afternoon is a good day.

@simonbailey9076 3 года назад

Put your change in a bucket of diesel by going bucket put some diesel in it but change down in there let himself for a couple days you'll be good as new

@kctechie 3 года назад

😁

@genecarr4568 3 года назад

Ok I may be late to the party here. But watching your video during the manual turning of the PTO, the worm gear on the right side is not turning when the worm gear on the left is turning. I am no professional expert, but that seems wrong to me.

@bobreeves5412 3 года назад

You're missing a flat plate on your tension springs on the string tension and when they get War they will not hold the string need about 8 lb pull on the string so you need to buy a flat plate to go with that curved plate but I would put two new ones on then you won't have no problems

@jerrynibarger9148 3 года назад

You did realize the knotter on the right isn't tight?

@e.a.bfarms 3 года назад

While you can save money doing it yourself but it dont take much hay not getting baled or getting rained on to make service call seen cheap.

@This1LifeWeLive 3 года назад

It's a gamble either way ;D

@glenparks5175 3 года назад

Use chain lubes for motorcycles that dont collect dirt

@This1LifeWeLive 3 года назад

I didn't know that was a feature of mototrcycle lube!

@HGNeese3rd1 3 года назад

check and compare home depot (huskie brand).

@garynelson4749 3 года назад

you probably already know this by now but the right worm gear shaft was turning but not the worm gear ...need to actually tightn the nut you loosened to adust the twine discs to re-seat the taper fit.....also the "guy" with the tail that is against the twine disc that you put a washer on is not a twine disc clearance adjuster it sets how tight the twine discs hold the string it is basicly a flat spring the tigher you tighten it down the tighter it holds the string you adjust it by putting a string in with a pull gage and tighen it till you have to pull X # of pounds to pull the string thru when its closed tightening it to a washer behind it is defeating its purpose .........anyway i assume your baler tech got you going .....good luck hope you get that great looking hay up ok...

@mikegoodman447 3 года назад

Need to remove that washer ,it does not belong there.

@This1LifeWeLive 3 года назад

the cam discs will not re-time unless the nut is loose and the worm gear loose. The tail is for the tensioner, it move left or right adding or lessoning tension on the twine cam discs. The manual said a washer can be added if needed. The part there is off the old baler and mst likely quite worn, but in better shape than the parts we pulled off this baler. But you'll find out in the next video if it got going or not ;)

@garynelson4749 3 года назад

@@This1LifeWeLive ...online tech help is predictable...tons of new parts....4 digits expense later ...cheaper to buy a new baler .... ugggg ...best of luck.....:)....i guess if it all worked as it should your content would be boring LOL.....:)

@scottsmith6903 3 года назад

Do ya want to see the Tedder?

@MrJerryKramer 3 года назад

Buy you the building you want for your office.

@grosseileracingteam 3 года назад

Hay Suz, what are you going to be for Halloween?

@This1LifeWeLive 3 года назад

Myself . . . that's scary enough . . . just ask Erik 😂

@georgebarger3345 3 года назад

Spa,fancy dining,shopping spree ?

@rogersigmon1169 3 года назад

You should get a new cowgirl hat.

@This1LifeWeLive 3 года назад

I like that idea!

@robbytextor3954 3 года назад

I get a new one

@scottmccullough978 3 года назад

Every baler I have had the flywheel has ran the whole machine.

@frankdooner8628 3 года назад

Need a mower or baler repaired call Suzanne 📞 on WTFARM great job You can clean the chains without taking them off brilliant video

@northernliving2387 3 года назад

You need to change the name of your Channel to WT Farm equipment Girl Repair channel!

@This1LifeWeLive 3 года назад

😂🙈

@bolshevi3187 3 года назад

You gotta have one episode where you look like the quintessential ‘farm girl’ especially with Halloween coming up. Trucker cap, denim bib overalls, checkered ranch shirt, work boots. Would look really cool!

@This1LifeWeLive 3 года назад

I don't even own bib overalls, lol! I have winter bibs... but I dirty jeans way to fast to afford that many pair of bibs😂... but I did have a Halloween costume in mind 😉

@bolshevi3187 3 года назад

@@This1LifeWeLive oh for real? I thought every farm girl owns a pair. Anyway keep up the good work. Love from the U.K