READYLIFT SST 4" INSTALL 2022 GMC SIERRA! 

Dude, you need to ditch those old ass wheels and get something newer for a 60+ thousand $ truck. Black needs chrome.

I’d love to see the wheels from chomper on this truck. Not necessarily the wheels themselves but the graps would be 🤌🏼

I’m the 69th like lol, and the truck looks amazing! The lean gives the truck a better look to me (please don’t hate me)

Man those 33s look tiny with the lift

What size wheels and tires do you have ? Did you have to trim or any rubbing?

Love you trucks and I joy the longer 15-25 min videos

Since u like wides with lip you should run some 24x14. But personally I love truck on 17’s with 35’s or 37’s

Little low in the rear due to the drop shackles but overall love it! Love the havoc wheels

nice rig🔥🔥🔥... do a vid on lowering the beams on the headlights

The only thing I have never liked about the ready lift uca’s is the lack of protection for the top of the ball joint with grease zerk. I put my lift on during winter and got some rust by week one because the little pocket holds water and road salt. I 3D printer an abs plug that holds a retained o ring to seal out weather. Works great. Ready lift should send a plug for this purpose! Try the rear blocks and see what that looks like.

How are your cv angles? Is that not a concern with a 4” lift?

The truck looks mean and stanced up. Getting them baby squat vibes again ❤️. Also, have you considered repainting your wheels? The white ring definitely is unique, but I think it would look best if they were black again. Maybe someone around where you live can repaint and restore them, unless you’re up for the challenge.

I love seeing 8 extensions being used on a ratchet. 100% dad move. 😉👍

Plz try a bubba setup on this one to😮‍💨

What size are the tires? Truck looks beautiful.

With black paint you should protect the paint with a film

Some 6s an 5s would set it off man

Time for some 24x14 and 35s!

How are the CV angles and lower ball joints?

You think if I get this on my 2021 chevy rst with a 4” lift with 35x12.50R20 cause I wanna used my stocks with some mud grapplers

The truck looks good! Did the CV axle straighten back out to a more level position with the wheel and tire back on it sitting on the ground than the position it was in when you were installing the kit with the wheel and tire off the truck. What size wheel and tire are you running on the truck with this lift. I have a 2019 GMC sierra 1500 Denali and I'm looking for something like this for my truck.

These longer more informative videos are just so much better then, here I’m gonna change my antenna. Combine those small items together to make longer, better videos. Truck looks awesome. Looking forward to your larger tire video. Have a great day.

You should really invest in a torque wrench.. And what's the point of not also lifting the rear? Looks dumb.

Chase you need to invest in ratcheting wrenches, they will make your life so much easier

is this the same height as your last white silverado trailboss? or is it taller than that truck?

With the front axle angles.....how much vibration in 4x4 do you have ?

Omfg , my mud tires have , like, rocks stuck in them , like, 🤣🤣🤣 , we are out in the boonies, son you and your ice cap have no idea wtf the boonies actually is.

Just got off work and instantly watched this ! Looks absolutely amazing. Cant wait to see whats next

Looks good, how’s the quality of the ride since you installed it and how’s the lift been holding up and have you done any fixing since u got it ?

Looks awful with only 1/2 the lift installed, a squatted shitbox if you will, all thats needed now is a gay pride decal on the back window and you are all set.

Damn, just Ruined a Perfectly good Truck. 😩😩

I'm ok with that lean, the full bulldog I just can't stand. Sorry all you who like it!!!

I love the lift you should keep it like that

Truck looks great. I’d have to go ahead and install the rear blocks. I don’t know how bright the new LED reverse lights are. But the Diesel LED’s I installed in mine are insanely bright. I’ve seen peoples headlights that aren’t as bright as they are.

Way to tall for my liking. Takes away from a lot of what the actual truck is for. But nonetheless, sweet!

🔥🙂

What size rims and tires? I’m doing the 4 inch lift and went with 20 inch rims with 35 tires.

Thank god it's not a 2.5 inch leveling kit lol

Please put rear kit on

Needs to put black tail lights and the lights on top of the back window the same it will look amazing if you did

Get rid of them old ass Wheels man. Brand New truck should be going with a fresh set.

Just remove the drop shackles you installed and would be close to level !!!

Lookin purdy good LMF!

Bro the rear end squat is killing what would be a perfect lift

Old you fit 35’s with some trimming?

That front end is way off level. It’s pointing so high. Ugly lift

I think you need to change your wheels and tires. My opinion.

That thing looks nice 👌🏽 I didn’t think a 4 inch lift looks so good

Truck looks killer, I'm not usually a fan of chrome but it flows nicely with your setup on black.

Don't squat your truck waste of a perfectly good truck

I can’t wait to lift my truck. Be a pair of leaning bros 😎

Dude off topic ik but horseflies ain't playing around this year...Idk if I've ever seen so many...It's a plague

Don’t drop shackles and no block just for a video

looks great but its so quiet lol i hope the 23' 2500HD gets the same front end but has the 6.6 duramax :OO

Looks super good dude perfect squat 😜

Hello sir ，I am from @MaXpeedingRods sponsoring team❤ Could we have a talk ?

How’s it holding up after a year?

Beautiful truck, rims are not appealing

To each his own but this is just awful. The wheels are so bad themselves then you ad them to a otherwise common pickup with a 5.3 and then the lower rear, just awful.

BEST installation demo on RU-vid!

Looks GREAT! I'm about to invest in this same kit for my 2019 GMC Sierra SLT 4x4! I need more clearance for the ruts we have on NM range roads, Did you add the rear 3" blocks and what rear shocks are you sporting how about the tire size? I like the aggressive look, please respond.👍

What size are the wheels and tires? What’s that offset?

Frankie again [70yr.old kid] from L.I. saying hello. The truck looks better & better. When I was your age their were plenty of magazines about trucks. Now I only find STREET TRUCKS. It is o.k. but they push these low to the ground trucks, low riders. They look rediculous.I can not see the attraction but to each his own. Again truck looks great!!! I'm going to putt putt over to Dunkin in my colorado to get a snack. Y'all STAY WELL & SAFE FRANKIE FLORAL PARK.

Looking good bro! Hoping I can get to where you are

Should invest in a torque wrench.

Honestly, truck looks great. But I'm considering trading my Gladiator with 4" lift and 38s. It just isn't that drastic. I would only run 35s. I don't know. The perspective is just off for what I expected. Again, truck looks sharp as hell.

Where can i find that lift i could not find it when i go to the website

first

حسبي الله ونعم الوكيل.... طاح بيد اللحوج

You don't bother with torque settings on the nuts then!

Looks good. Are you going to lift the back end up or leave it like it is. Are u going to do the exhaust too

First

Looks great n the front but only girls squat

Does that affect the performance of the cv axel?

THERE'S the best setup dude, mrs collins ,complements your rig.i my DEFINITELY enjoying my 2020 LTZ 6.2.PUSHING 500 hp, 600 lbs TQ.🇺🇸yeeyee.MericA.

Hey bud good video. Just picked mine uo lsst week. You hsve any info on the pulsar lt making a model for our truck? Thanks in advance for sny info. Im worried about the lifters!! 😮😮

so did you or did you not add the rear lift blocks ?

Some big chrome reps would look fire asf.

Did u use blocks in the rear if yes what size

I have a 2022 AT4 in which already has a factory 2 inch lift, I want to add two more inches or a level kit so to kits my 35x12.50x20 tires.

Looks great time for reps or chrome wides

Looks good man, are you looking for a different wheel setup or sticking with that one?

Did you need brake line extension ???

Do you need shock extensions in the rear?

Does it clear full turn Or does it rub??

Did you have to reconfigure the windshield camera and the electronic power steering? Love the information in your videos. Thank you!

Wow.. what's it like to work on a new vehicle where every single bolt isn't rusted on from years of salt and rust and corrosion.. . A guy can dream..

I noticed when looking at the factory website, they offer a 2" leveling kit that looks like longer half shafts. Your Readylift didn't replace these. Any issues? What did you do with your kit after you removed it to trade the truck?

What brand on rims and size and tires

#BabySquat2.0 🤔🤔 Split 7’s are the move chase!! 24’s and 35’s for the win!

My 2020 Sierra has LED reverse lights. I think it’s just the Silverados that didn’t have them before. Probably still don’t

Didn’t wait long to make it a f*ck boy truck. Those 12 wides are in need of a new set of tires btw. Kids these days will call anything shoes. At least you did the lift yourself. Good on you.

that's clean af man perfect amount of lean!

Was this the 899.99 4in kit? It comes with lift for rear too but you stated that you didn’t lift rear? I ordered the 4 in kit too, hopefully it arrives Wednesday.

Looks good, but now the back looks to low.

How is the cv axle angle ?

Let’s gooo

Id probably not throw the top strut spacer on it and just the preload on in between the coil should leave it right at level with the rear or 1/2-3/4 lower than rear But then again on 12wides might not clear them 😅

Did you have any issues with u-bolts not fitting? I have a 22’ sierra elevation with x31 pckg and they were too narrow

nice truck bro