Real Over Unity MVP Device Self Charging 

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-aEyXmsn9Mlo.html

J Price not to mention there are other ways of increasing effeciency.

Iron core on pulse motor and air coils on the AC/DC Gen

I have an experiment for you, - let me know if you are not interested. - but Split the bank down the middle, too charge seperatley. - but charge one bank, with a high voltage capacitor, in paralell with the bank, and linked by a tinyest possible spark gap. - - then charge the capacitor 1-2uf, @ 100-400v , witb your bedini pulses too posiive of the cap, as per usual, and hookup a good ground wire too the cap terminal ( see whcich terminal speeds up the sparking most.. -- i have 3 ground rods, of ree-bar- each 2meters, and connected with 14gauge copper. , - PS love the lenz buster, im about too do some reading of my own.

Could you tell me how to put 8 coils 8 magnets single phase in series i seen on youtube it is + + - - + + - - Thanks Tommy

I wanna check that out!

Please can you show me how to build one? zadirectltd@gmail.com

You misunderstand. The battery is the both the power source and the charging bank. From a dead start the bank was at 106 volts. After doing the experiment, doing work, the bank was charged up to almost 109 volts. I've repeated this experiment 100 times and since moved on to other phases of development. This design allows the devices to bypass lenz altogether on one rail and deals directly with it on the other rail. Also, measuring amps with a pulse motor this big leads to a lot of blown ampmeters because of the spiky nature of the out put voltage believe me. It's a closed circuit, I care about the power I have available within that circuit. Tesla and Bedini said the larger the power source the bigger the effect.

loanmagician.wixsite.com/mvpmotorplans

loanmagician.wixsite.com/mvpmotorplans

Thanks for your support man. I practically give the plans away for small donation to help fund the cause. People still complain but research is not free. Hell freedom is not free!

Heating issue solved. Not exactly sure what the problem was, maybe it was bad batch of transistors. That's only thing I changed and now she cold as ice!

loanmagician.wixsite.com/mvpmotorplans

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-aEyXmsn9Mlo.html

Doug aa

Why not use maintenance free batteries? who wants to do specific gravities?

YES!! YES!! YES!! Great Work "Brother in arms"!! I agree with this brother, Too.!! NOW, THE H.V.Cap's are A Key, on your Return.!! But let Me help with one problem at a time. "Dealing with The Heat"!! A Larger wire Size's can help" but I've had problems with cause and effect"!! Larger wire" means Greater Resistance.!! So, try increasing the number of turns, or Change out To a D.C.Volts, Type of wire, and OR you could Try Connecting an aluminum plate, to Center of Each Coil. NOW, Your MOST IMPORTANT PART," TO LOOK AT IS, THE "Read switch" try adding Some Spark gap's.!! They will help your system" Tap into the "Ether" Once you've got That'?? It will Cool your whole set-up Down.!! And Pump a "Mind Blowing" amount of power, into the closed loop" when you switch it Over.!! Remember that is the key, adding a Spark gap, OR more than one" will take you to the next level.!!! Then Add a system that can let you push Some Resonance, into the system, as it's running" Work with it, all as a closed loop system,!! Using the battery bank, and an High Quality, Car amp.!! Tweak it a little" and if you Do everything Right,?? You'll have something that can run a Home, with-out any outside HELP.!!! Please Try this stuff.!! JR.Perry

You are correct in that the tap battery drains but the overall battery bank voltage increases and thus eventuallu tries to replenish the drain battery. No damage is done to that battery however. I can go to another battery and tap that one while the other one recharges. This can go on for weeks or months it seems. Not sure if it's overunity but it sure looks like it.

Build your ac coils into the bedini circuit coils. I don't have a lot free time but the basic plans are available on my website.

The bedini works in both push and pull mode so I alternated the magnet fields and and still works. Spacing may play a part in how well it runs. Definitely increases the torque of any pulse motor.

@@MatrixLeTV I understand the pull mode of the ssg being that of a magnet pulling to a iron stationary core, but if the magnets on your rotor are North and South config , then the core of your electromagnet will only push the north Magnet on such rotor and the south will actually pull if the electromagnet is triggered since the core face is directing towards your rotor magnets. LMK I am working on this issue by using a home made reed and a trifilar , one trigger two drive , one drive is creating north at face of core and the other drive coil is creating south at face of core.

@@MatrixLeTV I see why you are using the lens buster , cause you are getting drag when the south rotor magnets passes your core. This can be solved with a tri filar

@@mykedoes4099 interesting..I will investigate

LAU lol he’s more likely to disappear than receive 200$ looks like you can only get plans if you donate

loanmagician.wixsite.com/mvpmotorplans

Now she runs cold as ice for hours...It may have been resistance

loanmagician.wixsite.com/mvpmotorplans

loanmagician.wixsite.com/mvpmotorplans